Flame Flare Detection Module Flame Sensor 12V Relay Board infrared Receiver Module
$7.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Usage
Various flames, fire source detection, relay output, can be connected to 220V high current equipment
Features
1. It can detect flame or light source with wavelength in the range of 760 nm to 1100 nm. The flame distance of the lighter is 80 cm. The larger the flame, the farther the test distance is.
2. The detection angle is about 60 degrees, especially sensitive to the flame spectrum
3. The sensitivity is adjustable (blue digital potentiometer adjustment in the figure)
4. The comparator output directly triggers the relay
5. The external dimensions:50x26x19mm, with fixed bolt holes for easy installation
6. The output has a blue terminal block, convenient wiring
Electrical parameters
Supply voltage:12VDC
Current:greater than 150mA
Load:250V 10A AC or 30V 10A DC
Instructions for use
1. The flame sensor is most sensitive to the flame and also responds to the sunlight. It is generally used for flame alarms and other purposes.
2. By adjusting the potentiometer, the intensity of the sensor’s induced flame can be set. When the flame exceeds the set threshold, the relay is closed, the common end is connected to the normally open end, and when the flame is lower than the set threshold, the relay is disconnected. The common end is connected to the normally closed end;
3. The common end, normally open, normally closed three ports are equivalent to a dual control switch, when the relay coil is powered, the common end is open to the normally open end, when there is no electricity, the common end and the normally closed end are turned on;
4. The sensor and the flame should be kept at a certain distance to avoid damage to the sensor at high temperature. The flame distance of the lighter is 80cm. The larger the flame, the farther the test distance is.
Package includes
1 x Flame sensor module
Weight | 0.017 kg |
---|
Customers Also Viewed
1pcs AS15-G AS15G TQFP-48 Chip IC
$4.36Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionType:AS15-GQuantity:1Package included1 x AS15-G AS15G QFP48 Chip IC
18W 1PCS Aquarium Filter Aquarium internal Filter Oxygen Submersible Water Pumps for Fish Tank Pond Aquarium Filters
$48.59MathematicsAdd to cartSpecificationsModel:1280FMaterial:ABSFlow 1300 L/H ,Cable length:1.1MMaximum lift:1.2mOxygen tube length:0.34MFit For fish tank:≤80cmColor:As Picture ShowPower Consumption:18WWeight:639gFeatures-Removable filter box, easy to replace the filter material.-Adopt high quality and firm ABS shell, durable, freshwater and sea water are suitable.-Small size, easy to hide, at the same time filtering, oxygen, pumping and other functions.-With biological filtration cotton in the filter …
4 Channels 4-20mA Current Signal Generator Module Board with 12864 Digital LCD Display
$55.43Other Module BoardAdd to cartDescriptionThis module is a multichannel current signal generator that generates 4 channels 4~20mA current signal. The module is simple to use and input data by keystroke operation, and the output signal is updated immediately.FeaturesUse 12864 LCD displayVoltage:15-24VActive output current 0~20mA. Display resolution 0.01mA and control accuracy 0.1mAPolarity protection of input voltageCan analog transmitter outputCompatible for …
4 Channels 4-20mA Current Signal Generator Module Board with 12864 Digital LCD DisplayRead More
20pcs LM393 DC 5V Optoelectronic Sensor PIR Sensor Module with LED instruction Slot Single Signal
$23.96Sensor & Detector ModuleAdd to cartSpecificationsThe distance between PCB two circular hole (point to point center) is 1.5cm, and the aperture is 0.3cm.Slot type optocoupler slot width:10mmMain chip:LM393, slot type optocoupler H2010Working voltage:DC 5VSize:32mm x11mm x 20mmCharacteristic1. There is a signal output indication.2. Single signal output.3. When the object is blocked, the output is high level (LED lights out), and …
DIY Digital Display LED Logic Pen Electronic Kit High and Low Level Test Circuit Soldering Practice Board Kit
$4.36DIY Electronic KitsAdd to cartDescriptionPower supply:DC 4.5-5VBoard size:3.5 * 5.5cmLow-level judgment voltage:0.0-0.4VHigh-level judgment voltage:3.3-5VPackage included1 x DIY Digital Display LED Logic Pen Electronic Kit
Reviews
There are no reviews yet.