JK12-A 12V Time Adjustable Relay Module with LED Digital Tube Dynamic Display Countdown Single Chip Relay
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Usage
This module starts work after triggering. If you need to set the power to start timing, then you can connect the two trigger lines directly.
inchTriggerinch is simply a touch of two lines. It can be a short touch or a long time. Timing starts when you touch each other.
K:Switching signal trigger, valid at the leading edge
RY:Relay
After power-on, RY has no action. After K is triggered, RY is immediately turned on. After the delay, the RY is disconnected after the countdown ends. When K is triggered again during the delay, it will immediately jump to the end of the delay (ie, RY is disconnected).
Features
– The button trigger type triggers the action to start immediately and delays. (If the button end is shorted before power-on, each power-on will be turned on and delayed by the setting)
– Display:The set time is displayed during adjustment; during the delay, the countdown is displayed dynamically.
– Switch on the load immediately after the trigger and disconnect the load after the specified time.
– During the delay, the button operation immediately stops the delay and returns to the initial state.
– During the delay, the digital tube reduces the brightness and counts down the delay to display the remaining time in real time.
– Set the time by adjustable resistor. The adjustable range is from 1 to 99. The unit can be selected by jumper. When the jumper is connected to the second, the adjustable range is 1-99 seconds. The jumper is connected to the time division. The adjustable range is 1-99 points.
– Board size:70mm x 40mm, height less than 18mm
Package Included
1 x JK12-A 12V Time Adjustable Relay Module with LED Digital Tube Dynamic Display
Weight | 0.029 kg |
---|
Customers Also Viewed
5x 10x USB 8 LED Lights Handheld Stand Desktop Reading Magnifier
$24.29PhysicsAdd to cart5x 10x USB Eight 8 LED Lights Handheld Stand Desktop Reading Maintenance Multipurpose Magnifier 75RCDescription1. [2 In 1 Design]:It is not only a handheld magnifier, but also a desktop stand magnifier. It can be used as a desk magnifier by pulling its stand and placing it on a table. It can also be folded up …
5x 10x USB 8 LED Lights Handheld Stand Desktop Reading MagnifierRead More
DALY BMS 16S 48V 30A 40A 60A 3.2V 18650 Bluetooth 485 to USB Device NTC UART Software Togther Lion LiFepo4 Battery BMS
$12.14Battery Protection ModuleAdd to cartType 30A com UART BT / Type 30A com UART 485 / Type 30A com UART 485 CAN / Type 40A com UART BT / Type 40A com UART 485 / Type 40A com UART 485 CAN / Type 60A com UART BT / Type 60A com UART 485 / Type 60A com UART 485 CAN / Type USB to CAN box / Type USB to RS485
5Pcs Geekcreit 328P Multifunction Expansion Board V3.0 for NANO UNO
$24.26Expansion Board & ShieldAdd to cartDescriptionThe extension board specifically for the NANO , welding on two rows of pins, can be used in the duemilanove 2009, U N O R1Package included5 x 328P Multifunction Expansion Board V3.0
20pcs LilyPad MCP9700 Temperature Sensor Module
$55.07Sensor & Detector ModuleAdd to cartDescriptionDetecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical …
IO22C04 4 Channel Pro Mini Relay Module Expansion Board Multi-function Delay Relay PLC Power
$24.04Relay ModuleAdd to cart>>>Manual:Click here to openFeatures– Operating voltage:power supply 1,DC 6.5-25V; power supply 2,DC 5V– Operating Current:Standby current (all relays closed) 15mA, 1 relay open 45mA, 2 relays open 77mA, 3 relays open 109mA, 4 relays open 140mA– Size:80x66x19mm– Weight:79g- On-board resources:4x opto-isolated inputs (low level trigger, NPN type), 4x buttons, 1 4 bit digital tube display, …
1-1000M 3W HF FM VHF UHF FM Shortwave Broadband Amplifier Upgrade Improved Version
$30.60Other Module BoardAdd to cartApplicationsBroadband RF power amplification, suitable for HF FM VHF UHF FM transmission of various radio applications, short-wave FM remote control toys, radio walkie-talkies, digital radio stations, etc., can output up to 3 watts, 15V voltage supply, 1MHZ to 1000MHZ can work frequency range.Technical indicators1. The supply voltage Voltage:DC + 12 ~ 15V (typical 15V @ …
1-1000M 3W HF FM VHF UHF FM Shortwave Broadband Amplifier Upgrade Improved VersionRead More
Geekcreit LTDZ 35M-4400M Handheld Simple Spectrum Analyzer Measurement of interphone Signal
$159.96Test & Measuring ModuleAdd to cartNew update version:Update from December, please use the new manual.Introduction:>>>Click here to openThis product uses the local oscillator signal and the external test signal to obtain the difference frequency signal, and calculates the amplitude of the external test signal through the detector. Using a high-precision VCO source, the heterodyne signal frequency can be measured very …
Geekcreit LTDZ 35M-4400M Handheld Simple Spectrum Analyzer Measurement of interphone SignalRead More
Reviews
There are no reviews yet.