0.36 inch/0.56 inch PLC Controller Parameter LED Display Module D0 D2 PLC Programming Module Digital Tube Display
$19.52
Inch 0.56 Inch / Inch 0.36 Inch /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Usage Steps
1. The power register will always display the value mode of data register D0, D2 (D0 in the lower row, D2 in the upper row). Users can display different data by changing the value of D0 in the PLC ladder by MOV D D0 command.
2. When the MODE button is pressed for 1 second, the decimal point on the left will light up, then enter the mode of adjusting the data register number. At this time, increase or decrease the value by the two buttons on the right to adjust the number of the data register to be adjusted. If you want to set D128 to 100, then adjust to 128 in this step.
3. Press the MODE button again for 1 second, the rightmost decimal point will light up, then enter the mode of adjusting the value of the data register selected in the previous step, and also adjust the data register by increasing or decreasing the value by the two buttons on the right. Value, if you want to set D128 to 100, then adjust to 100 in this step.
4. When the MODE button is pressed for 1 second, the value mode of the data register D0, D2 (D0 in the lower row and D2 in the upper row) is displayed again.
5. When the UP button is pressed, the M171 is turned on and the UP button is released, then the M171 is disconnected.
6. When the DOWN button is pressed, the M172 is turned on and the DOWN button is released, then the M172 is disconnected.
7. When the RST button is pressed, the M173 is turned on. When the RST button is released, the M173 is turned off.
Package Included
1 x 0.36 Inch/0.56 Inch PLC Controller Parameter Display Module
Weight | 0.1 kg |
---|
Customers Also Viewed
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch Module
$16.24Sensor & Detector ModuleAdd to cartDescriptionIt uses Doppler radar technology, with auto-sensing capabilities to control other product,High sensitivity, sensor distance, reliability, wide angle sensor,Wide supply voltage range and other characteristics. Widely used in lighting situations,anti-theft alarm situations.Features1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their …
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch ModuleRead More
24V Air Parking Heater Flame Sensor Igniters Flame Detecter 82306B for Webasto Air top 2000
$70.86Solar CollectorsAdd to cartSpecificationsBrand Name:AutoleaderMaterial:Silicon NitrideOEM:82306BItem weight:11gFeaturesThis product is mainly made of silicon nitride ceramic substrate, with tungsten filament as the heat source, tungsten wire embedded in silicon nitride matrix, via hot-press sintering process to form an organic whole, then through grinding, welding wire, thus made the ignition components.Fitmentfor Webasto Air Top 2000Package Included1x Parking Heater Senser
L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based on ESP12E
$9.79Expansion Board & ShieldAdd to cartL293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E For Specifications 1. Motor power (VM):4.5 ~ 36V 2. Control power (VIN):4.5V ~ 9V(10V MAX) 3. Provide the shortcut connector (short by VM and VIM), thus can use 4. May use common power source (4.5V~9V) by shorting VM …
220V 1000W Hot Plate Electric Iron Burner Heating Stove Heater Household Laboratory Heating Equipments
$52.64Laboratory Heating EquipmentsAdd to cartSpecificationsType:Electric Stove BurnerPlug Type:EUColor:WhiteVoltage:220VPower:1000WRegulating temperature:5 LevelsMaterial:Stainless Steel + IronSize:14*14*5CM (5.5*5.5*2in)Features– Adopted iron shell, thicken panel, material sturdy and durable to use– Portable single burner with 500 watts of power– Powered by electric, do not need fuel, eco-friendly– Easy-to-use temperature-setting knob for low, medium, or high heat– Provides quick and sustained heat; power indicator light– Single …
Reviews
There are no reviews yet.