0.36 inch/0.56 inch PLC Controller Parameter LED Display Module D0 D2 PLC Programming Module Digital Tube Display
$19.52
Inch 0.56 Inch / Inch 0.36 Inch /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Usage Steps
1. The power register will always display the value mode of data register D0, D2 (D0 in the lower row, D2 in the upper row). Users can display different data by changing the value of D0 in the PLC ladder by MOV D D0 command.
2. When the MODE button is pressed for 1 second, the decimal point on the left will light up, then enter the mode of adjusting the data register number. At this time, increase or decrease the value by the two buttons on the right to adjust the number of the data register to be adjusted. If you want to set D128 to 100, then adjust to 128 in this step.
3. Press the MODE button again for 1 second, the rightmost decimal point will light up, then enter the mode of adjusting the value of the data register selected in the previous step, and also adjust the data register by increasing or decreasing the value by the two buttons on the right. Value, if you want to set D128 to 100, then adjust to 100 in this step.
4. When the MODE button is pressed for 1 second, the value mode of the data register D0, D2 (D0 in the lower row and D2 in the upper row) is displayed again.
5. When the UP button is pressed, the M171 is turned on and the UP button is released, then the M171 is disconnected.
6. When the DOWN button is pressed, the M172 is turned on and the DOWN button is released, then the M172 is disconnected.
7. When the RST button is pressed, the M173 is turned on. When the RST button is released, the M173 is turned off.
Package Included
1 x 0.36 Inch/0.56 Inch PLC Controller Parameter Display Module
Weight | 0.1 kg |
---|
Customers Also Viewed
Christmas LED Colorful Luminous Mask Stage Bungee USB Charging EL Cold Light Mask
$24.04EL ProductsAdd to cartDescriptionProduct Name:Colorful Luminous MaskProduct material:luminous sourceProduct size:19*10CMLight color:color gradient / breathing light dimming power supply mode:USB charging 3.7V, 400 mAProduct use time:charging for 1-2 hours, continuous light for about 10-12 hoursProduct unit weight:about 60 gramsPackage included1 x Christmas mask
20pcs N/O N/C Emergency Stop Switch Push Button Mushroom 4 Screw Terminals
$58.87Electronic Accessories & SuppliesAdd to cartSpecificationTwo switching circuits:1 Normally Open + 1 Normally Closed (DPST:Double-Pole-Single-Throw)Stackable contacts:mix and match to suit your needContact rating:600V / 10ANumber of terminals:4Panel cut out diameter:22mmDepth behind panel:44.5mmButton diameter:40mmPackage included20 x Emergency stop switch
USB to Pin Module USB interface Converter Board Electronic Building Blocks for
$3.67Converter BoardAdd to cartFeatureSize:24 x 21 x 10mmFixing hole:3mmPitch:600mil (15.24mm)Interface:A-type USB holderApply:Change the USB interface to pins, easy to connect the target devicePackage includes1 x USB to Pin Module
5pcs SHT21 Temperature and Humidity Sensor Module High Precision Environmental Measurement Smart Home
$53.30Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openParameterWorking voltage:3VRelative humidity:0~100%RHTemperature:-40~+125°CCommunication method:IIC interfacePlease refer to the product manual for more information:Click here to open.Package includes5 x Sensor module
RF Wideband Low Noise Amplifier 0.1-2000MHz Gain 32dB High Frequency Amplifier with Shell
$81.72RF amplifierAdd to cartDescriptionThis amplifier has the advantages of wide frequency range, high gain, low noise figure, etc. It can be used in various radio frequency receiving front ends to increase the communication distance! Wide range of shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other places where low-noise and small-signal radio frequency amplification is …
RF Wideband Low Noise Amplifier 0.1-2000MHz Gain 32dB High Frequency Amplifier with ShellRead More
5pcs Miniature Digital Recording Voice IC Chip Module Movement Recorder Recording Pen Music Card
$19.64DIY Electronic KitsAdd to cartFeatureEasy to use 6 seconds voice recording, high quality, clear voice reduction, can be used as a micro recorder, recordingpen, megaphone, recording greeting card module, this module can drive 8 euro 0.5W speakers. Operating InstructionsRecording button; press and hold the button to stop recording (recording will begin to drop a sound), let go of recording …
Reviews
There are no reviews yet.