2000W High Power Soft Start Board 30A Dual Temperature Control Switch Delayed Start Board for Amplifier Amp DIY
$38.31
Type #1 / Type #2 / Type #3 / Type #4 / Type #5 / Type #6 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Type(option)
1:Terminal type Songchuan relay
2:Plug-in terminal type Songchuan relay
3:Plug-in terminal Songle relay
4:Terminal Type Songle Relay
5:Terminal type HF-105F-1 Relay
6:Plug-in terminal type HF-105F-1 Relay
Product description
Dual temperature control soft start uses high quality power module to replace traditional transformer, with low energy consumption, high efficiency, ultra stable, low heat, 105-235V wide voltage (for domestic and foreign), and so on!
This product PCB adopts 1.6MM thick double-sided fiberglass board, 2.0 oz copper thickness, tin-spraying process to ensure good passing of high current.
It is suitable for high-power amplifier and post-stage power supply as delay soft start board to avoid high current impact at the moment of booting and better protect your machine.
HF-105F-1 high current 30A power relay, stable and reliable performance, the maximum power can support 2000W.
Features
1. Delay start, the first relay is connected at the moment of power-on, and then the current is limited by the NTC thermistor. After a delay, the main relay is turned on to realize the soft-start function. Suppress the inrush current of the power amplifier, because the power of the class A and high power amplifier transformer is large, the load impedance is extremely low, and the capacity of the power supply filter capacitor is too large, resulting in excessive current of the power amplifier when the power is turned on, which easily damages the rectifier bridge and the damage filter capacitor.
2. 2 way overheat protection, use the attached 75 degree temperature control switch to install on the radiator,
When the temperature of the power amplifier board heat sink exceeds 75 degrees, the board can immediately cut off the power supply, and the power amplifier will not be overheated and burned. Until the temperature of the heat sink drops below 75 degrees, the power amplifier can be turned back on, otherwise the power amplifier can’t be turned on.
3. The power switch uses a tact switch, which is convenient and flexible. To prevent frequent machine damage to the machine.After the soft start is turned on, it takes about 12 seconds to shut down!
4. The input power supply voltage is between AC115V and AC230V.
Product parameters
Working voltage:220V
Maximum load:2000W
Control switch:light touch switch
Relay rated power:30A*2
PCB Size:9.8*8*2.2CM
Hole pitch size:7cm*8.6cm
Package included
1 x Switch Delayed Start Board
Weight | 0.1 kg |
---|
Customers Also Viewed
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB System
$45.75Battery Protection ModuleAdd to cartNote:The protective plate cannot be used in parallel.SpecificationsContinuous discharging current:45AInstantaneous diacharge current:100ACharging voltage:67.2VCharging current:45AOver-charge detect:4.28±0.05VProtect delay:100msOver-charge release:4.08±0.05VBalanceDetect voltage:4.2±0.025VRelease voltage:4.2±0.05VBalance current:60±5mAOver-discharge:2.55±0.08VOver-discharge detect delay:50mSRelease voltage:2.9±0.1VDetect voltage:150mVDetect delay:15mSCurrent detect:130±10AResistance:≤15mΩWorking current:≤60uASleep current (when over-discharge):≤10uAWorking temperature:-30~80→Size:120 x 60 x 9mm:Details:Specification:Unit:RemarkCharge:Charging voltage:71.4:VRecharging current:45 (max):ADischarge:Continuous discharge current:45 (max):AInstantaneous discharge current:150 (max):AOvercharge protection:Overcharge detection voltage:4. 25 ±0.025:V:Single coreOvercharge protection delay:100:mSOvercharge release voltage:4. 05 …
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB SystemRead More
25W 5V Foldable Solar Panel Solar Power Bank Pack with Dual USB Port for Backpack Camping Hiking
$78.68Smart Robot & Solar PanelAdd to cartFeatures∵ High-Efficiency Ponocrystalline Cell, up to 19%.∵ Eco-friendly & durable material.∵ Applied in charging 5V device as a power bank.∵ Portable, foldable and lightweight, with buckle to be fold firmly.∵ Produce continuous stable output even in cloudy day.∵ Suitable for outdoor activities, outdoor working or emergency.ParametersPmax:25WUSB Output Voltage:5VUSB1 Output Current:2000mA USB2 Output Current:1200mAQuantity of Single …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328
$66.77DIY Electronic KitsAdd to cart3Pcs DIY Multifunction Transistor Tester Kit For LCR ESR Transistor PWM Signal Generator M328FeatureA key measurement operation , auto power off delay . Shutdown current is only 20nA, support battery operation.Automatic detection PNP and NPN type bipolar transistors , N, P -channel MOSFET, JFET FET , diodes , two diodes, thyristors , resistors , capacitors …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328Read More
5pcs 2 Slots AAA Battery Box Battery Holder Board with Switch for2xAAA Batteries DIY kit Case
$9.36Other Module BoardAdd to cartSpecificationsSupport Model:AAA BatteryShell material:ABS Cable:1007 (150mm)Metal spring:carbon steel nickel plating by NCAA salt spray test, stainless steel spring.Size:53*24*13 mmPackage Included5 x 2 Slots AAA Battery Holder Plastic Case Storage Box
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module Converter
$86.01Sensor & Detector ModuleAdd to cartDescriptionThis is a conversion board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice.The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that’s operational on the low side from 1.0 V to …
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module ConverterRead More
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10A
$18.51Relay ModuleAdd to cartDescriptionTiming from Microseconds to HOURSSimple CircuitryPrecision Pulse Generation / Timing,FMAX = 500 KHzUse a single 4 to 16 VDC supplyExcellent temperature stability 0.005% / °CAdjustable Duty CycleCountless Application and Information SourcesChip (NE555) CharacteristicWhen unconnected with the supply power, the state of the module is inchNOinch [ normal open ], CB and COM are conductive. CK …
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10ARead More
Reviews
There are no reviews yet.