2000W High Power Soft Start Board 30A Dual Temperature Control Switch Delayed Start Board for Amplifier Amp DIY
$38.31
Type #1 / Type #2 / Type #3 / Type #4 / Type #5 / Type #6 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Type(option)
1:Terminal type Songchuan relay
2:Plug-in terminal type Songchuan relay
3:Plug-in terminal Songle relay
4:Terminal Type Songle Relay
5:Terminal type HF-105F-1 Relay
6:Plug-in terminal type HF-105F-1 Relay
Product description
Dual temperature control soft start uses high quality power module to replace traditional transformer, with low energy consumption, high efficiency, ultra stable, low heat, 105-235V wide voltage (for domestic and foreign), and so on!
This product PCB adopts 1.6MM thick double-sided fiberglass board, 2.0 oz copper thickness, tin-spraying process to ensure good passing of high current.
It is suitable for high-power amplifier and post-stage power supply as delay soft start board to avoid high current impact at the moment of booting and better protect your machine.
HF-105F-1 high current 30A power relay, stable and reliable performance, the maximum power can support 2000W.
Features
1. Delay start, the first relay is connected at the moment of power-on, and then the current is limited by the NTC thermistor. After a delay, the main relay is turned on to realize the soft-start function. Suppress the inrush current of the power amplifier, because the power of the class A and high power amplifier transformer is large, the load impedance is extremely low, and the capacity of the power supply filter capacitor is too large, resulting in excessive current of the power amplifier when the power is turned on, which easily damages the rectifier bridge and the damage filter capacitor.
2. 2 way overheat protection, use the attached 75 degree temperature control switch to install on the radiator,
When the temperature of the power amplifier board heat sink exceeds 75 degrees, the board can immediately cut off the power supply, and the power amplifier will not be overheated and burned. Until the temperature of the heat sink drops below 75 degrees, the power amplifier can be turned back on, otherwise the power amplifier can’t be turned on.
3. The power switch uses a tact switch, which is convenient and flexible. To prevent frequent machine damage to the machine.After the soft start is turned on, it takes about 12 seconds to shut down!
4. The input power supply voltage is between AC115V and AC230V.
Product parameters
Working voltage:220V
Maximum load:2000W
Control switch:light touch switch
Relay rated power:30A*2
PCB Size:9.8*8*2.2CM
Hole pitch size:7cm*8.6cm
Package included
1 x Switch Delayed Start Board
Weight | 0.1 kg |
---|
Customers Also Viewed
3Pcs MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development Board
$16.16Motherboard & Development BoardAdd to cartDescriptionThis is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface.The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be …
220V 100A Class A Power Amplifier Soft Start Delay Temperature Protection Board with Gas Discharge Tube
$24.95Relay ModuleAdd to cartFeatures100% Brand new and high quality.FunctionThe board is equipped with a gas discharge tube. The gas discharge tube is composed of a pair of cold cathode plates which are separated from each other and enclosed in a ceramic tube filled with a certain inert gas (Ar).The gas discharge tube is turned off under normal operating …
Excellway Terminals 40 Pcs 2p 3p 4p 5pin Right angle JST-XH Male Female Lipo Balance Connector
$36.44ConnectorsAdd to cartSpecificaiton Brand:Excellway Pitch:2.54mm Current Rating:1A AC, DC Voltage Rating:125V AC, DC Temperature Range:-25 deg C ~ +85 deg C Insulation Resistance:100M Omega Min. Wire Range:AWG 24~ 32 Insulation O.D.:1.00mm ( Max.) Withstanding Voltage:500V AC/minute Features These work great with all your typical and breadboard style pin connectors and sockets. This kit comes with the most …
HBV-1466FF Fixed Focus 5MP OV5640 FPC Camera Module USB 5 Million Pixels IP Camera Module
$42.85Other Module BoardAdd to cartSpecificationsModel No.:HBVCAM-1466FFModel Size:68.2mm ≠ 26mm ≠ 6mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:FixedObject distance:30CM-infinitResolution:800LW/PH (Center)Interface:USB 2.0Power:USB bus powerMaximum Power consumption:940 mWPackage:Anti-electrostatic trayOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvcCertifications:FCC and CEActive Array Size:2592*1944Sensor:OV5640 (1/4” )Sensitivity:600mv /(lux-sec)Pixel Size:1.4┢m x1.4┢mMaximum Image Transfer Rate:MJPEG 1024×768 30FPS / YUY2 160×120 30FPSMJPEG 1280×720 …
HBV-1466FF Fixed Focus 5MP OV5640 FPC Camera Module USB 5 Million Pixels IP Camera ModuleRead More
10pcs 40x40mm Small Fan 4010S Computer Chassis CPU Fan 2 Line with Plug
$19.84Electronic Accessories & SuppliesAdd to cartDescriptionAppearance size:40mm x 40mm x 10mmSpeed reference:4000 ± 10% RPMNoise Reference:18DBAir volume reference:18.17-25.97CFMRated voltage:12VRated current:0.10APackage included10 x Fan
Reviews
There are no reviews yet.