Music Tesla Coil Acrylic Shell Arc Plasma Speaker Wireless Transmission Experimental Desktop Toy Model White
$114.82
Type Normal Version / Type With Shell / Type With bluetooth / Type With bluetooth+Shell /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Type Selection
Normal Version:Not support bluetooth funcion, no shell
With Shell Version:With the transparent acrylic shell, not support bluetooth funcion
With bluetooth Version:Support bluetooth funcion, not includes the transparent acrylic shell
With bluetooth + Shell Version:Support bluetooth funcion, with the transparent acrylic shell
Features
1. Color white base + blue secondary restoration
2. Dimensions (length * width * height) 85 mm * 85 mm * 175 mm / 3.3 x 3.3 x 6.9in
3. Weight 270 g / 269.3 gram (net weight) 650 g / 652 gram (package weight)
4. About power includes
5. Audio cable 3.5 mm / 6 inch round port
6. Voltage 8-32 V (8 V will start to work, light bulb arc 13 vstart can play music, the best sound quality of 24 V is not higher than 32 V
7. Current 0 2 A (The power is determined by the input power when 24 V current is about 48 cm wide
Package includes
1 x Tesla coil
1 x Audio cable
3 x Neon bulbs
3 x Electrode needle
1 x Adapter
Instructions
1. Assembled electrode needle. The electrode needle must be assembled before powering on
2. Connect one end of the adapter to the socket and the other end is a DC joint.
3. Connect one end of the audio cable to the smartphone or computer and the other end to the circuit board. Recommended capacity 80-95%)
Note
1. It is not suitable for people to transplant electronic medical equipment.
2. When working, you can touch the burned skin with both hands of the electrode.
3. Do not move Tesla while holding the coil.
4. Do not touch the copper parts of the electrode heat sink circuit board. Do not use any conductors to touch the secondary ignition coil or the Tesla will be damaged.
5. Do not use this Tesla environment with flammable and explosion-proof materials or closed coils and large-size metals.
6. If Tesla fails to start successfully, first please use a screwdriver to touch the tip of the discharge to keep it warm, but do not touch it for a long time, which may burn Tesla
Weight | 0.5 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.