30pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$178.88
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the latched or non-latched mode. There are 6 input ports for transmission, corresponding to the 6 output ports received, which can be extended to 64 channels. The 6 channels can work independently or at the same time without interference. The module adopts the learning code mode and the module has a single ID number. A remote controller can arbitrarily learn the ID address and data channel of a receiving module. The receiving module has a learning and prohibiting learning function to prevent illegal learning of the same type of remote controller, and the application security level is high. The module is small in size, low in power consumption, and easy to use. The transmitter module only needs to design a button board according to the remote control shell. The receiving module has no peripheral parts, and does not need any programming. The coding chip is very convenient and simple to use, and multiple sets of products can be simultaneously Use without interfering with each other, effectively solve the problem that 315/433M remote control products cannot be launched at the same time.
RX mode conversion function
Latch mode:RX output port is normally 0 level state, press the button once, receive the output high level and latch, press the button again, the receiving output becomes 0 level, the B8 port needs to be connected to GND.
Non-latching mode:Press and hold the transmit button, receive the output high level, release the button, and receive 0 level. The B8 port needs to be connected to VDD.
Pair code and disable code function
TX and RX must be used for the code. RX can only identify the TX with successful code. After the code is successful, the B7 code port must be disconnected (floating) to prohibit other TX pairs, preventing other remote controllers from illegally controlling the code. Your receiving device. The receiving pair code port does not limit the number of pairs of the remote controller (multiple send 1 version) in the allowable code status, allowing several remote control code to be determined by the owner. If the receiving module (RX) is replaced after the code is coded, the original remote control (TX) needs to be re-coded. The remote control can only control its own receiving device. If a remote controller and its receiving device are paired with the code, then learn the other. Receiving the device and learning successfully, the receiving device will no longer receive the information of the remote controller and automatically clear the remote controller. If you need to use this remote control, you need to re-receive the device pair code. The password is a unique 32-bit address that is sent to the other party when the code is paired. Each transmission or reception can only store a unique password. If the code is re-coded, the original password will be cleared.
Package included
30 x TY24D-TX Module
30 x TY24D-RX Module
Weight | 0.12 kg |
---|
Customers Also Viewed
1:2 1-56MHz 200W Balun HAM Shortwave Antenna Balun 50 ohm to 100 ohm Unbalanced Balance
$56.85RF amplifierAdd to cartThe main parameters1. The transformation ratio is 1:22. Input impedance:50 ohms (unbalanced)3. Output impedance:100 ohms (balance) suitable for QUAD ANT antenna4. Frequency range:1-56MHz5. Standing wave:less than 1.56. Power resistance:500w7. Dimensions:outer diameter 50x130mm8. Weight:350 grams9. Comes with epoxy resin plate and 304 stainless steel lifting ring, with two copper noses for connecting the vibrator, convenient for …
1:2 1-56MHz 200W Balun HAM Shortwave Antenna Balun 50 ohm to 100 ohm Unbalanced BalanceRead More
5 Pcs 2.54mm 20 Pins IC Socket Wide DIP Sockets Adapter Solder Type
$3.55Module ComponentsAdd to cartSpecificationColor:blackQuantity:5 pcsNumber of pins:20 Pins (10pins / row x 2 rows)Pin length:2.9mmPitch:2.54mmRow to row distance:7.62mmDimension:25 x 10 x 8mm (L x W x H)Contact termination through holeContact type dual wipe contactPackage included5 x 20 Pins IC Sockets
1Hz-150Khz 3.3V-30V Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display
$22.06Other Module BoardAdd to cartParameter settingsThe module has four independent keys, used to set the frequency and duty cycle, support short press (increase or decrease a unit)and long press (fast increase or decrease), very simple, set the parameters automatically save, power failure Lost.Module parameters1. Working voltage:3.3 ~ 30V;2. Frequency range:1Hz ~ 150KHz;3. Frequency accuracy:the accuracy in each range is …
4 Slots 18650 Battery Holder Plastic Case Storage Box for 4*3.7V 18650 Lithium Battery with 8Pin
$6.55Module ComponentsAdd to cartSpecificationsSupport Model:18650 BatteryShell material:ABS fire, flame retardant, high temperature, color diversity and other materials for choice.Metal spring:carbon steel nickel plating by NCAA salt spray test, stainless steel spring.External:wire, welding pieces, pins, male and female buckle (3.7v button)Terminal:copper nickel platingCorn:nickel plated with coppervPackage Included1 x 4 Slots 18650 Battery Holder Plastic Case Storage Box
Reviews
There are no reviews yet.