30pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$178.88
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the latched or non-latched mode. There are 6 input ports for transmission, corresponding to the 6 output ports received, which can be extended to 64 channels. The 6 channels can work independently or at the same time without interference. The module adopts the learning code mode and the module has a single ID number. A remote controller can arbitrarily learn the ID address and data channel of a receiving module. The receiving module has a learning and prohibiting learning function to prevent illegal learning of the same type of remote controller, and the application security level is high. The module is small in size, low in power consumption, and easy to use. The transmitter module only needs to design a button board according to the remote control shell. The receiving module has no peripheral parts, and does not need any programming. The coding chip is very convenient and simple to use, and multiple sets of products can be simultaneously Use without interfering with each other, effectively solve the problem that 315/433M remote control products cannot be launched at the same time.
RX mode conversion function
Latch mode:RX output port is normally 0 level state, press the button once, receive the output high level and latch, press the button again, the receiving output becomes 0 level, the B8 port needs to be connected to GND.
Non-latching mode:Press and hold the transmit button, receive the output high level, release the button, and receive 0 level. The B8 port needs to be connected to VDD.
Pair code and disable code function
TX and RX must be used for the code. RX can only identify the TX with successful code. After the code is successful, the B7 code port must be disconnected (floating) to prohibit other TX pairs, preventing other remote controllers from illegally controlling the code. Your receiving device. The receiving pair code port does not limit the number of pairs of the remote controller (multiple send 1 version) in the allowable code status, allowing several remote control code to be determined by the owner. If the receiving module (RX) is replaced after the code is coded, the original remote control (TX) needs to be re-coded. The remote control can only control its own receiving device. If a remote controller and its receiving device are paired with the code, then learn the other. Receiving the device and learning successfully, the receiving device will no longer receive the information of the remote controller and automatically clear the remote controller. If you need to use this remote control, you need to re-receive the device pair code. The password is a unique 32-bit address that is sent to the other party when the code is paired. Each transmission or reception can only store a unique password. If the code is re-coded, the original password will be cleared.
Package included
30 x TY24D-TX Module
30 x TY24D-RX Module
Weight | 0.12 kg |
---|
Customers Also Viewed
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck Module
$16.24Power Supply ModuleAdd to cart20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step-Down Power Supply Buck ModuleFeaturesSize:8.6 x 12.33 mmInput voltage:DC 4.2 V – 10 VOutput:3.3 V, 800 mANote1.Boost modules or buck module indicate the operating voltage, Please do not exceed operating voltage, or it will be damaged easily!2.Boost module output voltage can only be greater than or equal to …
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck ModuleRead More
XD-37 12V 72W Electronic Semiconductor Refrigeration DIY Air Cooling System Small Air Conditioning
$35.52Electronic Accessories & SuppliesAdd to cartFeatures1. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.2. Application:Fish tank cooling, computer water cooling, circulating water cooling, cooling equipment, etc.3. Use to Connect the pump and the power supply.4. Diy kits Thermoelectric Peltier refrigeration cooling system.Fast cooling, outstanding effect.5. Simple operation, strong practicability.DescriptionsNo noise, …
5pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$11.42Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
10pcs Mini 2A DC DC Buck Converter 3.3-5.5V to 3.3V Module Step Down Voltage Regulator Module
$30.16Boost & Buck ModuleAdd to cartDescriptionINPUT 3.5V/1.4A; OUTPUT 3.3V/1.5AINPUT 3.7V/1.89A; OUTPUT 3.3V/2AINPUT 4.2V/1.67A; OUTPUT 3.3V/2AINPUT 4.5V/1.46A; OUTPUT 3.3V/2AINPUT 5V/1.4A; OUTPUT 3.3V/2A Input voltage 3.3-5.5V, output 3.3V (deviation ±2.0%)Long time maximum output current 1.8AShort time maximum output current 2.2AUp to 97% efficiency(@4.2V to 3.3V/500MA)Low Quiescent Current:20uAOvertemperature shutdown, input under-voltage protection, External Soft start, and short circuit protection. DC-DC Buck Step-down module …
10Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid Dropper
$10.80Lab ChemicalsAdd to cartSpecificationsMaterial:PECapacity:10mlSize:20X77mm / 0.79X3.0 inchNeedle Size:Inner Diameter =0.8mm, Outer Diameter =1.2mm, Length=12mmQuantity:10 pcsFeatures1. 10ml empty plastic bottle with metal needle2. Metal needle design,durable and easy to use3. Ideal for storing E cig liquid,solvents, light oils , eye drops, saline, etc.Package included10 X 10ml Empty Plastic Bottle With Metal Needle
Reviews
There are no reviews yet.