offline Version 1610 PRO 3 Axis CNC Router GRBL Control DIY Adjustable Speed Spindle Laser Motor Wood Engraving Milling Machine

The software and instruction please:https://drive.google.com/openid=1JXQbBj-CuYee53yvQESx5HsVRhJ59VTD
Specification:Rated Voltage:24V
Engraving area:16x10x4.5cm
Spindle:775 spindle motor
Softwear:GRBL control systems
support system:24V 5.6A adapter
Stepper motor:fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M
Spindle:775 spindle motor (12-36V) 24V:10000r / min
Supported System:Windows XP / Win 7 / Win 8 / Win 10 / Linux.
Drill bits:tip 0.1mm ,20 degree , diameter3.175mm. the package include 10pc.
clamps:4 pcs, Hold the thickness of 0-30mm,size:50 * 20 * 3 (length * width * thick), the inner slot width 6mm
Feature
1. Support GRBL and benbox firmware. Support CNC 3-axis laser engraving machine.
2. The stroke length isn’t limited to 30×18 and 24×18, it can be setting other length. Please set the stroke in the command.
For example
3018, please set the stroke in the command, 30cm length and 18cm width;
2418, please set the XY stroke in the command, length 24cm, width 18cm.
3-Axis GRBL Control Board
Output signal
1:Fan:Used for shaft motor cooling
2:Shaft:Connect motor shaft, keep the same with power supply voltage, 5A electricity, if the motor power of the spindle is high, can connect external relays such as the switch. G code M3 open, M5 closed, with version 0.9 of the firmware can adjust PWM, achieve the speed of the axis governing and tunable laser
3:X axis motor signal output, A4988 max 1.5A electric current
4:Y-axis motor signal output, A4988 max 1.5A electric current
5:Z-axis motor signal output, A4988 max 1.5A electric current
Input Signal
1:X-axis minimum limit X-
2:Y-axis minimum limit Y-
3:Z-axis minimum limit Z-
4:Reset button:press the button, system will restart, can be used for urgent stoping of machine
GRBL Off-line Controller
Press Z+ and Z- , the Z axis will move up and down.
Press X+ and X- , the X axis will move left and right.
Press Y+ and Y- , the Y axis will move Front and Back.
Press SPIN:Spindle on (Laser on ), Spindle off (laser off)
Press SMOD:return
Press Z+ for 5 seconds , change the Language to English.
SD Card:Included , you need a SD card reader to write into the root directory G-code files .
Notice
The Laser Interface is 3 pin on this control board. Only support 42 stepper motor.
USB Cable Length:20cm
Firmware:GRBL 08, 09, 1.1 and so on
Input Voltage:DC 7V- 36V
Package List
1 * Engraving Machine
1 x GRBL 3-Axis Control Board
1 x LCD Screen GRBL Controller
1 x USB Cable
1 x Cable for Spindle Connection
1 x SD Card