10pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$61.84
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the latched or non-latched mode. There are 6 input ports for transmission, corresponding to the 6 output ports received, which can be extended to 64 channels. The 6 channels can work independently or at the same time without interference. The module adopts the learning code mode and the module has a single ID number. A remote controller can arbitrarily learn the ID address and data channel of a receiving module. The receiving module has a learning and prohibiting learning function to prevent illegal learning of the same type of remote controller, and the application security level is high. The module is small in size, low in power consumption, and easy to use. The transmitter module only needs to design a button board according to the remote control shell. The receiving module has no peripheral parts, and does not need any programming. The coding chip is very convenient and simple to use, and multiple sets of products can be simultaneously Use without interfering with each other, effectively solve the problem that 315/433M remote control products cannot be launched at the same time.
RX mode conversion function
Latch mode:RX output port is normally 0 level state, press the button once, receive the output high level and latch, press the button again, the receiving output becomes 0 level, the B8 port needs to be connected to GND.
Non-latching mode:Press and hold the transmit button, receive the output high level, release the button, and receive 0 level. The B8 port needs to be connected to VDD.
Pair code and disable code function
TX and RX must be used for the code. RX can only identify the TX with successful code. After the code is successful, the B7 code port must be disconnected (floating) to prohibit other TX pairs, preventing other remote controllers from illegally controlling the code. Your receiving device. The receiving pair code port does not limit the number of pairs of the remote controller (multiple send 1 version) in the allowable code status, allowing several remote control code to be determined by the owner. If the receiving module (RX) is replaced after the code is coded, the original remote control (TX) needs to be re-coded. The remote control can only control its own receiving device. If a remote controller and its receiving device are paired with the code, then learn the other. Receiving the device and learning successfully, the receiving device will no longer receive the information of the remote controller and automatically clear the remote controller. If you need to use this remote control, you need to re-receive the device pair code. The password is a unique 32-bit address that is sent to the other party when the code is paired. Each transmission or reception can only store a unique password. If the code is re-coded, the original password will be cleared.
Package included
10 x TY24D-TX Module
10 x TY24D-RX Module
Weight | 0.04 kg |
---|
Customers Also Viewed
ULN2003 Stepper Motor Driver Board Test Module for AVR SMD
$4.36Driver ModuleAdd to cartDescriptionULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with strong load capacity and other characteristics, adapted to the requirements of various types of the high-speed high-power drive system.Features1. Using ULN2003 high-power Darlington chip-driven stepper motor2. Increased output expansion interface.3. A, B, …
ULN2003 Stepper Motor Driver Board Test Module for AVR SMDRead More
3pcs DD40CRTA 2 in 1 Charger Module DC DC Step Down Module Converter DC 6.5-40V to 4.2V 5V Charging Board 9V 12V 24V to 4.2V Regulator
$18.54Power Supply ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsInput voltage 6.5-40VOutput 1:DC 4.2V/0-1A, as battery ChargerOutput 2:DC 5V/0-1A, as 40-6.5V to 5V Step down module Maximum charging current:1000mA Full charge voltage:4.2V÷2%.Led indicator‘OK’ LED is fully charged OR battery failure indicator; …
3 Pcs Sliver Aluminum Alloy Case with Cooling Fan Protective Shell Metal Enclosure fit for Raspberry Pi 4 Model B
$58.52Raspberry Pi & Orange PiAdd to cartThe Raspberry Pi is not included, you could get it here:Raspberry Pi 4 Model BDescriptionThis is a Protective case designed specifically for Raspberry Pi 4 Model BThe product is made of aluminum and it is very strong,high hardness, pressure resistance, strong metallic luster, not easy to rust,it can perfectly protect your motherboard Aluminum alloy material …
Heavy Duty Iron Boxing Punch Bag Wall Bracket Mount Hanging Stand Holder Hanger
$121.49Lab Clamp & StandAdd to cartFeature1. Heavy duty gym-quality Punch Bag wall bracket made from iron added strength and treated with nti-static spray is perfect for in and outdoor training activity!2. Reinforced iron arm protrudes 60CM from wall and can withstand heavy bags up to 800KG with ease.3. Three bolt points, attaches perfectly into brick or block walls.4. Mount this …
Heavy Duty Iron Boxing Punch Bag Wall Bracket Mount Hanging Stand Holder HangerRead More
20pcs DC 5V Step Up Boost Converter Voltage Regulate Power Supply Module Board with Enable ON/OFF
$72.05Boost & Buck ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsWorking frequency:1MHzUp to 94% Efficiency (usually is 75%-91%) Quiescent current:Turn on output 210uA,Turn off output 5uA. Operating temperature:-40~+85 →Storage temperature:-65~+150 →Size:20 x 15 x 6mmWeight:1.5g ProtectionOver current protection(OCP)Over voltage protection(OVP)Short circuit protection(SCP)Over …
Reviews
There are no reviews yet.