2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$8.26
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the latched or non-latched mode. There are 6 input ports for transmission, corresponding to the 6 output ports received, which can be extended to 64 channels. The 6 channels can work independently or at the same time without interference. The module adopts the learning code mode and the module has a single ID number. A remote controller can arbitrarily learn the ID address and data channel of a receiving module. The receiving module has a learning and prohibiting learning function to prevent illegal learning of the same type of remote controller, and the application security level is high. The module is small in size, low in power consumption, and easy to use. The transmitter module only needs to design a button board according to the remote control shell. The receiving module has no peripheral parts, and does not need any programming. The coding chip is very convenient and simple to use, and multiple sets of products can be simultaneously Use without interfering with each other, effectively solve the problem that 315/433M remote control products cannot be launched at the same time.
RX mode conversion function
Latch mode:RX output port is normally 0 level state, press the button once, receive the output high level and latch, press the button again, the receiving output becomes 0 level, the B8 port needs to be connected to GND.
Non-latching mode:Press and hold the transmit button, receive the output high level, release the button, and receive 0 level. The B8 port needs to be connected to VDD.
Pair code and disable code function
TX and RX must be used for the code. RX can only identify the TX with successful code. After the code is successful, the B7 code port must be disconnected (floating) to prohibit other TX pairs, preventing other remote controllers from illegally controlling the code. Your receiving device. The receiving pair code port does not limit the number of pairs of the remote controller (multiple send 1 version) in the allowable code status, allowing several remote control code to be determined by the owner. If the receiving module (RX) is replaced after the code is coded, the original remote control (TX) needs to be re-coded. The remote control can only control its own receiving device. If a remote controller and its receiving device are paired with the code, then learn the other. Receiving the device and learning successfully, the receiving device will no longer receive the information of the remote controller and automatically clear the remote controller. If you need to use this remote control, you need to re-receive the device pair code. The password is a unique 32-bit address that is sent to the other party when the code is paired. Each transmission or reception can only store a unique password. If the code is re-coded, the original password will be cleared.
Package included
1 x TY24D-TX Module
1 x TY24D-RX Module
Weight | 0.004 kg |
---|
Customers Also Viewed
EraClean Smart Control Ultrasonic Cleaner 45000Hz High Frequency Vibration Jewelry Eyeglasses Cleaner 360 Cleaning Machine From You Pin
$80.99Laboratory Heating EquipmentsAdd to cartDear Customer,Thank you for supporting, the orders will be shipped before 10st Nov.Hope your kindly understanding and support. Thank you:)Description[New Release] EraClean Mini Ultrasonic Cleaner from XIAOMI ECO Brand System, Quality Guaranteed, With Mute Quiet Design, Cleaning Anything You Want in 3 Minutes.Smart Control Ultrasonic Cleaner 45000Hz High Frequency Vibration Jewelry Eyeglasses Cleaner 360° Thoroughly …
DIY 12V 420W 6-Chip Semiconductor Refrigeration Cooling Device thermoelectric Cooler Air Conditioning High Cooling Efficiency
$129.99Electronic Accessories & SuppliesAdd to cartDescriptionName:420W 6-Chip Semiconductor Air-Conditioning DIY Radiator KitMaterial:metalSize:160*60*60mmVoltage:12VPower:420W( 6-Chip) In the case of 15.4VElectric current:36ASteady current:27ARed line:inch+inch , Black line:inch-inchRefrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, sealability ,etc…UseSmall space cooling, learning the principle of semiconductor refrigeration, the company developed cooling equipment research, pet air-conditioning, etc., use to cool down …
Lampow LP-9027 DC 12V 24V Waterproof Mirror Touch Sensor Control Switch for LED Strip Light
$15.30Electronic Accessories & SuppliesAdd to cartDescriptionType:LP-9027Output Mode:Sensor output, input is outputSwitch mode:touch sensor on/off switchInstallation:recessed installationWaterproofLightweight and compact sizeEasy to install, stable, long lifeApplication:LED light, LED strip, cabinet kitchen light, kinds of electric applicationsSpecificationsMaterial:Plastic+MetalColor:WhiteVoltage:12-24VOutput Current:3AQuiescent CurrentService time:> 80000hWorking Temperature:-20-50°Hole Diameter:17mmCable Length:0.5m(Output) 1.5m(Input)Size:19*11mmPackage included1 x Touch Sensor Control Switch
M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + Expansion Board Prototyping for M5StickC ESP32 Mini IoT Development Board Finger Computer
$42.47Motherboard & Development BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.This is without watch accessories,If you like with watch accessories>>>with watch accessories:Click here to BUY>>>More M5Stack Item:Click here to openDescriptionM5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, …
PAJ7620U2 Gesture Recognition Sensor Module DIY IIC 9 Gesture Recognition Controller Board
$16.71Sensor & Detector ModuleAdd to cart>>>Manual:Click here to open Overview 1. This is a gesture recognition sensor based on PAJ7620U2. It can recognize 9 different gestures including up, down, left, right, front, back, clockwise, counterclockwise, and swing. 2. The gesture recognition module uses the I2C interface and it use the corresponding library function to program and control. The signal returned …
PAJ7620U2 Gesture Recognition Sensor Module DIY IIC 9 Gesture Recognition Controller BoardRead More
5Pcs Magnetic Field Antenna Large EMC EMI Near Field Probe Conduction
$39.35RF amplifierAdd to cartFeature1. Magnetic field extra large probeInterface:SMA outer screw inner holeProduct size:110*45.5MMProduct weight 8 grams2. Magnetic field large probeInterface:SMA outer screw inner holeProduct size:110*30MMProduct weight 8 grams3. Magnetic field medium probeInterface:SMA outer screw inner holeProduct size:110*20MMProduct weight 6 grams4. Small magnetic field probeInterface:SMA outer screw inner holeProduct size:110*12.5MMProduct weight 6 grams5. Electric field probeInterface:SMA outer screw …
5Pcs Magnetic Field Antenna Large EMC EMI Near Field Probe ConductionRead More
Reviews
There are no reviews yet.