Automatic Micro Home Drip Irrigation System Sprinkler Digital Irrigation Timer
$103.26
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Size:82x56x160mm
Waterproof:IP44
Working water pressure:0.2 – 0.8 Mpa
Working water temperature:1 – 40 ℃
Inlet thread:3/4 inch internal thread
Outlet thread:3/4 inch external thread
Battery:2×1.5V AA battery (Battery is not includes)
Features
1. When the battery is installed, the product automatically turns on and enters the default irrigation program.
2.30 seconds without key operation, the screen automatically turns off and the product goes to sleep. Press any key to light up the screen again.
3. Large LCD display at a glance.
4. Button operation is simple and convenient.
5. Intelligent timing, set the irrigation program according to your needs.
6. Battery power prompt design.
Note
1. This product is for outdoor use only and is not allowed to be dismantled.
2. In order to ensure the normal operation of the product, horizontal or inverted installation is prohibited.
3. This product is waterproof and dustproof to IP44. Do not soak in water or rain.
4. Working water pressure:0.2Mpa-0.8Mpa. The product itself does not generate pressure, the pressure of tap water is used; there is tap water or a source of pressure, and the product can be discharged normally.
5. Working water temperature:1-40C. Before the winter freezes, please drain the water in the product water pipe to avoid cracking.
6. This product is only suitable for 2 pcs 1.5V AA alkaline batteries; when replacing the battery, please ensure that the battery compartment is dry.
7. When the battery is low, please replace the battery in time to avoid affecting the normal operation of the product.
8. Please clean the stainless steel filter regularly to avoid blockage; if it is damaged, please replace it in time.
9. When the product is in working condition, please caution children not to play this product.
Package includes
1x Digital irrigation timer
1x User manual
4x Connector
3x Gasket
Weight | 0.523 kg |
---|
Customers Also Viewed
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial Port
$15.30Display ScreenAdd to cartFeatureResolution:128X160Driver IC:ILI9163/ST7735Module with regulator IC supports 3.2V/5V power supplyWith SD card holder, you can do experiments like digital photo frameThe module reserves the Nokia3310/5110 interface, supports the 1602 interface, and directly plugs in and out.IO for streamlined wiring:(only 3 IOs after optimization)1. RST– directly connected to the microcontroller reset signal terminal, this IO can save2. …
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial PortRead More
USB Boost 5V to 1.2V 3.3V 6V 9V 12V 24V Power Supply Module Adjustable Voltage
$10.92Test & Measuring ModuleAdd to cartFeatureInput voltage:3.5V-12VOutput voltage:1.2-24VOutput PowerOutput voltage 1.2V-2V, used within 2WOutput voltage 2V-20V, used within 3WOutput voltage 20V-24V, used within 2.5WOutput power = output voltage x output currentNote:This product is not a high power supply, please use it within the power range.Package includes1 x Power Module
10pcs IR LED infrared Light Board for CCTV Camera Night Vision 30-40M 6*Array LED White 2.5W DC12V
$26.76LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features– High power / Spot Light / Infrared IR LED boards for CCTV cameras night vision.– Driven board & CDS sensor included.– Power supply exceeds DC13V may greatly reduce the LEDs operating …
2500Pcs 2.54mm XH2.54 2p 3p 4 Pin Connector Plug+Straight Needle+Terminal Socket Header Wire Adaptor
$56.09Electronic Accessories & SuppliesAdd to cartDescription2pin = 200 sets3pin = 200 sets4pin = 100 setsPin Connector Terminal:1500 pcs (Please allow 5% deviation)Package included10 x Connector plug kit with box
19PCS DIY Resin Casting Molds Silicone Jewelry Pendant Craft Making Mould Tool
$58.71ConnectorsAdd to cartSpecificationName:Resin Casting MoldsMaterial:SiliconeColor:TransparentFeature-Flexible, resistant to tearing.-Easy to use and clean.-Easy to release.-Durable in use.-Great for jewelry pendant making, earrings, soap making, chocolate making, sugarpaste making.-You can also add some flowers, glitter, colors to make your own art craft gift.Package Included9x Resin Casting Molds (Mold only, NO accessories)10x Wood Sticks
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development Board
$98.40Motherboard & Development BoardAdd to cartDocumentsProduct specification:Click here to openSchematic diagram:Click here to openat_instruction_set_CN_ONLY:Click here to open (If you mind about this, please don’t buy)hardware_info:Click here to openserial_tool:Click here to openFeature:Ca-01 development board characteristics and detailed parametersCommunication system:4GApplicable frequency band:LTE-FDD:B1/B3/B5/B8LTE-TDD:B34/B38/B39/B40/B41General characteristics:3GPP E-UTRA Release 13Band width:1.4/3/5/10/15/20MHZModule size:24.0mm x 24.0mm x 2.3mmPackage method:stamp hole + LGAModule weight:about 2.6gPower supply voltage:3.3V~4.3V, typical value …
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development BoardRead More
Reviews
There are no reviews yet.