4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development Board
$98.40
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Documents
Product specification:Click here to open
Schematic diagram:Click here to open
at_instruction_set_CN_ONLY:Click here to open (If you mind about this, please don’t buy)
hardware_info:Click here to open
serial_tool:Click here to open
Feature:Ca-01 development board characteristics and detailed parameters
Communication system:4G
Applicable frequency band:LTE-FDD:B1/B3/B5/B8
LTE-TDD:B34/B38/B39/B40/B41
General characteristics:3GPP E-UTRA Release 13
Band width:1.4/3/5/10/15/20MHZ
Module size:24.0mm x 24.0mm x 2.3mm
Package method:stamp hole + LGA
Module weight:about 2.6g
Power supply voltage:3.3V~4.3V, typical value 3.8V
Support Volte
Support TTS
Support Bluetooth
Support Wi-Fi positioning
Support base station positioning
Support SPI
Support MIPI Camera
Support SPI LCD
Support 6 x 6 scanning keyboard
Temperature range:Normal working temperature:-35C~+70C
Maximum operating temperature:~40C~+85C
Transmit power:LTE-TDD:Class3 (23dBm+1/-3dB)
LTE-FDD:Class3 (23dBm+-2dB)
LTE features:Support Cat. 1
Support volte
Support 1.4~20MHz RF bandwidth
LTE-TDD:Uplink and Downlink Configuration 2
Maximum uplink rate 2Mbps, maximum downlink rate 8Mbps
LTE-TDD:uplink and downlink configuration 1
Maximum uplink rate 4Mbps, maximum downlink rate 6Mbps
LTE-FDD:Maximum uplink rate 5Mbps, maximum downlink rate 10Mbps
Network protocol characteristics:Supported:TCP/UDP/PPP/FTP/HTTP/NITZ/CMUX/NDIS/NTP/ HTTPS/PING/FTPS/FILE/MQTT
Under development:SMTP/SMTPS/MMS/DTMF
USIM card interface:Support USIM/SIM card:1.8V and 3V
USB interface:Compatible with USB 2.0 (only support slave mode), data transfer rate up to 480Mbps
Used for AT commands, data transmission, software debugging, software upgrades
USB virtual serial port driver:Supports USB drivers under Windows 7/8.1/10, Linux 2.6.X/3.X/4.1, Android 4.x/5.x/6.x/7.x and other operating systems
Serial port:UART1
‘For AT commands and data transmission
‘Maximum baud rate 921600bps, default 115200bps
‘Support hardware flow control (CTS/RTS)
UART2
‘For debugging information output
Baud rate 115200bps
HOST UART
Used to output debugging information
ZSP UART
Used to output debugging information
Antenna interface:Characteristic impedance 50 ohm
RoHS:All devices are fully RoHS compliant
Package:117 pins, see the pin diagram for the actual available pins.
Ca-01 Sensitivity Data Sheet
FDD B1:-99dBm(10M)
FDD B3:-99dBm(10M)
FDD B5:-100dBm(10M)
FDD B8:-100dBm(10M)
TDD B34:-99dBm(10M)
TDD B38:-99dBm(10M)
TDD B39:-99dBm(10M)
TDD B40:-100dBm(10M)
TDD B41:-99dBm(10M)
Package includes
1 x Board
Weight | 0.063 kg |
---|
Customers Also Viewed
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger for
$10.15Relay ModuleAdd to cartDescription Maximum load:AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Every channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the control line is broken, the relay will not act. Power indicator …
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger forRead More
5Pcs CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board A H Bridge
$50.91Other Module BoardAdd to cartDescriptionThe 33886 is a monolithic H-Bridge ideal for fractional horsepowerDC-motor and bi-directional thrust solenoid control. The IC incorporatesinternal control logic, charge pump, gate drive, and low RDS(ON) MOSFEToutput circuitry. The 33886 is able to control continuous inductive DC loadcurrents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed)at frequencies up to 10 …
20pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$4.36Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included20 x Resistor
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USB
$36.44Solar ControllersAdd to cartSpecificationsName:20A 12V/24V LCD Display PWM Solar Panel Charge ControllerModel:C11465Rated voltage:12/24V AUTOCharge current:20ADischarge current:10AMax.PV input power:260W(12V),520W(24V)Max solar input12V battery,the highest 23V24V battery when the highest 46VEqualization:14.2VFloat charge:13.7V (defaul,adjustable)Discharge stop:10.7V(defaul,adjustable)Discharge reconnect:12.6V(defaul,adjustable)Charge reconnect:13VVoltage of open light:Solar panel 8V(Light lights delay)Voltage of close light:Solar panel 8V(Light off delay)USB output:2 way USB output,5V/2A(Max.)Self-consumeOperationg temperature:-35-60℃Color:BlackSize:133.5mmx70mmx35mmFeatureBuild-in industrial micro controller.Big LCD display,all adjustable …
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USBRead More
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for Arduino
$39.35Expansion Board & ShieldAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openWhat do I mainly doArduino is a huge ecosystem. If the Pi interface can be converted to the Arduino standard, it can be connected to a variety of compatible Arduino expansion boards and connected to the Arduino ecosystem to obtain more available resources.I just do this.Basic situationCompatible with …
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for ArduinoRead More
Emakefun DC5V RGB Tricolor Lamp Module 5PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$10.61Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:5PIN anti-reverse connection Dupont line3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x RGB Tricolor Lamp Module (the other items are not includes)
Reviews
There are no reviews yet.