Automatic Micro Home Drip Irrigation System Sprinkler Digital Irrigation Timer
$103.26
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Size:82x56x160mm
Waterproof:IP44
Working water pressure:0.2 – 0.8 Mpa
Working water temperature:1 – 40 ℃
Inlet thread:3/4 inch internal thread
Outlet thread:3/4 inch external thread
Battery:2×1.5V AA battery (Battery is not includes)
Features
1. When the battery is installed, the product automatically turns on and enters the default irrigation program.
2.30 seconds without key operation, the screen automatically turns off and the product goes to sleep. Press any key to light up the screen again.
3. Large LCD display at a glance.
4. Button operation is simple and convenient.
5. Intelligent timing, set the irrigation program according to your needs.
6. Battery power prompt design.
Note
1. This product is for outdoor use only and is not allowed to be dismantled.
2. In order to ensure the normal operation of the product, horizontal or inverted installation is prohibited.
3. This product is waterproof and dustproof to IP44. Do not soak in water or rain.
4. Working water pressure:0.2Mpa-0.8Mpa. The product itself does not generate pressure, the pressure of tap water is used; there is tap water or a source of pressure, and the product can be discharged normally.
5. Working water temperature:1-40C. Before the winter freezes, please drain the water in the product water pipe to avoid cracking.
6. This product is only suitable for 2 pcs 1.5V AA alkaline batteries; when replacing the battery, please ensure that the battery compartment is dry.
7. When the battery is low, please replace the battery in time to avoid affecting the normal operation of the product.
8. Please clean the stainless steel filter regularly to avoid blockage; if it is damaged, please replace it in time.
9. When the product is in working condition, please caution children not to play this product.
Package includes
1x Digital irrigation timer
1x User manual
4x Connector
3x Gasket
Weight | 0.523 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.