3 IN 1 Soil Tester Display PH Meter Water PH Moisture Test Meter Moisture Humidity Kit for Garden Plant Flower
$22.26
Color Silver / Color Green /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Type:PH Soil Tester
Product Name:3 in 1 Horticulture Detector
Product color:light green silver
Measuring range:Illumination humidity value PH value
Use:Insert into soil
Scope of use:warm and humid flower garden, garden, greenhouse, etc.
Product size:about 26cm / 10.14inch
Probe length:Approximately 17.5cm / 6.83inch
(1cm=10mm=0.39inch)
Measurement Details in the attached picture.
Package included
1pcs PH Soil Tester
Features
100% brand new and high quality.
It is a water 3-in-1 soil tester, professional in testing soil moisture, PH value and environment sunlight intensity.
Use ergonomics. It is easy and fast for user to use with simple key operation mode and comfortable hand feeling.
No battery needed.
Measure precisely,respond quickly.
Made of good quality materials, rust-proof and durable
Accurate Reading:pH Range:3.5-8ph (3.5-6.5 Acid, 7-8 Alkaline), Moisture Range:1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet), Relative Light:0-2000lux (0-200 Low, 200-500 Low , 500-1000 Nor, 1000-2000 High).After a while, you will get a accurate data.
Using Method
1. Measuring soil pH, as far as possible to probe deeply into the earth and probe the upper portion for about 1 cm.
2. On the table is 2.5-9 numerical, numerical 7 basic is neutral, the smaller the number shows that the greater the acidity, please adjust soil pH value according to plant varieties.
4. Please pay attention that insert electrodes without touching the stone, not too hard, otherwise easy to damage the electrode, clean electrode after use.
Weight | 0.09 kg |
---|
Customers Also Viewed
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB System
$45.75Battery Protection ModuleAdd to cartNote:The protective plate cannot be used in parallel.SpecificationsContinuous discharging current:45AInstantaneous diacharge current:100ACharging voltage:67.2VCharging current:45AOver-charge detect:4.28±0.05VProtect delay:100msOver-charge release:4.08±0.05VBalanceDetect voltage:4.2±0.025VRelease voltage:4.2±0.05VBalance current:60±5mAOver-discharge:2.55±0.08VOver-discharge detect delay:50mSRelease voltage:2.9±0.1VDetect voltage:150mVDetect delay:15mSCurrent detect:130±10AResistance:≤15mΩWorking current:≤60uASleep current (when over-discharge):≤10uAWorking temperature:-30~80→Size:120 x 60 x 9mm:Details:Specification:Unit:RemarkCharge:Charging voltage:71.4:VRecharging current:45 (max):ADischarge:Continuous discharge current:45 (max):AInstantaneous discharge current:150 (max):AOvercharge protection:Overcharge detection voltage:4. 25 ±0.025:V:Single coreOvercharge protection delay:100:mSOvercharge release voltage:4. 05 …
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB SystemRead More
25W 5V Foldable Solar Panel Solar Power Bank Pack with Dual USB Port for Backpack Camping Hiking
$78.68Smart Robot & Solar PanelAdd to cartFeatures∵ High-Efficiency Ponocrystalline Cell, up to 19%.∵ Eco-friendly & durable material.∵ Applied in charging 5V device as a power bank.∵ Portable, foldable and lightweight, with buckle to be fold firmly.∵ Produce continuous stable output even in cloudy day.∵ Suitable for outdoor activities, outdoor working or emergency.ParametersPmax:25WUSB Output Voltage:5VUSB1 Output Current:2000mA USB2 Output Current:1200mAQuantity of Single …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328
$66.77DIY Electronic KitsAdd to cart3Pcs DIY Multifunction Transistor Tester Kit For LCR ESR Transistor PWM Signal Generator M328FeatureA key measurement operation , auto power off delay . Shutdown current is only 20nA, support battery operation.Automatic detection PNP and NPN type bipolar transistors , N, P -channel MOSFET, JFET FET , diodes , two diodes, thyristors , resistors , capacitors …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328Read More
5pcs 2 Slots AAA Battery Box Battery Holder Board with Switch for2xAAA Batteries DIY kit Case
$9.36Other Module BoardAdd to cartSpecificationsSupport Model:AAA BatteryShell material:ABS Cable:1007 (150mm)Metal spring:carbon steel nickel plating by NCAA salt spray test, stainless steel spring.Size:53*24*13 mmPackage Included5 x 2 Slots AAA Battery Holder Plastic Case Storage Box
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module Converter
$86.01Sensor & Detector ModuleAdd to cartDescriptionThis is a conversion board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice.The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that’s operational on the low side from 1.0 V to …
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module ConverterRead More
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10A
$18.51Relay ModuleAdd to cartDescriptionTiming from Microseconds to HOURSSimple CircuitryPrecision Pulse Generation / Timing,FMAX = 500 KHzUse a single 4 to 16 VDC supplyExcellent temperature stability 0.005% / °CAdjustable Duty CycleCountless Application and Information SourcesChip (NE555) CharacteristicWhen unconnected with the supply power, the state of the module is inchNOinch [ normal open ], CB and COM are conductive. CK …
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10ARead More
Reviews
There are no reviews yet.