Chihiros Doctor 3rd Algae inhibitor Device Aquarium Fish Tank Green Plant Remove
$164.01
Plug UK Plug /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Type:Mesh/Whole set
Color:White
Voltage:110-240V
Plug:UK/EU Plug
Weight:508g
Material:Plastic shell
Input Voltage:DC15V, 2.5A
Max Power:30W
TDS Ran ge:50-500
Package included
1X Whole Set Chihiros Doctor
Features
1.Inhibit green algae and promote plants growth
•Inhibit phytoplankton initial growth and reproduction.
•Activate microelements to promote plants growth
•Pro-motion of plants growth activates photosynthesis to stabilize ecosystem.
2 Kill the crustacean pathogenic bacteria
Automatically kill the pathogenic bacteria in the water in each hour through direct and indirect disinfection, which greatly improves the survival rate of juvenile prawns.
3 Depend on strong sterilization capabilities effectively kill pathogens
•Aeromonas hydrophila Aeromonas inchAeromons hydrophilainch, herpes, fungal, coli forms and other 99.9% kill efficiency results test.
4 Safe because of coexistence with filter bacteria
•As there is no residual toxicity, it is limited to aerobic bacteria.
•Compared to UV sterilizer, Chihiros DOCTOR does not work steadily so regenerating and recovery of filter bacteria is rapid.
5 ALC program is intelligent management algorithm
•Aquarium environment changes according to initial, middle, last stage, sterilizing inten-sity and operation cycle is intelligently designed to change by time series.
•As ALC program can simply choose a mode according to a aquarium capacity, it is very easy to use.
6.The new Chihiros Doctor has integrated 3 application covering usage of aquaticplants, fish and shrimp keeping into only a single Doctor device
Q & A
1.How does the Chihiros Doctor works
—It is designed not work all the time, it works bubble come out about every 30seonds
2.Does it hurt fish
—No influence to fish, shrimp and plant
3.Can it use in marine water
—Only used for fresh water
4.How long do I need to clean the mesh
—The new 3rd generation mesh can keep use for long time without clean, but we suggest exchange a new mesh every 6 months
NOTICE
1. If the product is not working properly, please check if the fish tank water quality TDS is too high (adding disinfectant salt or other substances to the water will cause the TDS to be too high). If it is too high, please replace the tap water in the fish tank.
2. The product host should be waterproof, otherwise it will cause the host to burn out and not work.
Weight | 0.508 kg |
---|
Customers Also Viewed
5pcs DD2712SA 3.5A Mini 5V-27V to 3.7V DC DC Step Down Buck Power Converter Module Voltage Regulator
$22.52Boost & Buck ModuleAdd to cartDescriptionInput voltage:5-27VOutput voltage:5V Maximum output current:2.5AShort time maximum output current:3.5A Quiescent current:about 250uAWorking frequency:900KHz.Working efficiency:77-92% Size:25 x 15 x 6.3 mmOvertemperature shutdown, Under-Voltage Lockout (UVLO), BS-voltage protection, and short circuit protection.Note1. Input voltage can not be greater than the maximum input range.2. Output power can not be greater than the maximum load for a long …
1080P 5MP 160 Fish Eye Surveillance Camera Module for Raspberry Pi with IR Night Vision
$34.43Raspberry Pi & Orange PiAdd to cartFeatures– This is the new version, can replace the infrared lamp or white fill light, the effect is great.– The Raspberry Pi Camera Board Features a 5 million pixels– And also supports 1080p @ 30 fps, 720p @ 60 fps and 640*480p 60/90 video recording.– OmniVision 5647 sensor in a fixed focus module.– The module …
1080P 5MP 160 Fish Eye Surveillance Camera Module for Raspberry Pi with IR Night VisionRead More
STM32H743VIT6 STM32H7 Development Board STM32 System Board M7 Core Board TFT interface with USB Cable
$58.95Motherboard & Development BoardAdd to cart>>>STM32H750VBT6 Manual:Click here to open>>>STM32H743VIT6 Manual:Click here to openhttp://myosuploads3.hobbyant.com/products/20200410/20200410051631STM32H750HAL-1909.rarhttp://myosuploads3.hobbyant.com/products/20200410/20200410020657STM32H743HAL-1909.rarSpecificationsFrequency:400M (M7 core)Package:LQFP100RAM:1024KBFlash:H750VB:128KB H743VI:2048KB (2M)OLED interface – plug and play, support 0.96 inch / 1.3 inch OLED TFT liquid crystal interfaceConnect 1.3 inch HD full color LCDConnect 2.0 inch HD full color LCD Data storage:W25Q64 (QSPI driver)High speed crystal:25MHZLow frequency crystal:32.768KPower + programmable LED lights2 users and …
2.5 inch 60mm LED Turbo Boost Gauge Vacuum Press Pressure Bar Dials Meter for Car Truck
$99.21Switch AccessoriesAdd to cartSpecifications Material:Aluminum+ABS+Acrylic Power:DC(10-15V) 12V Professional Reads Range:-1~2 BAR Light Colour:White + Red Diameter:2.5 Inch /60mm Packing Size:15 x 8 x 11cm Features 270 degree sweep. Illuminated red needle display. LED Backlight display between white and red light are switched by the button. When the pressure alarm, peak light becomes red, the pressure alarm point can …
2.5 inch 60mm LED Turbo Boost Gauge Vacuum Press Pressure Bar Dials Meter for Car TruckRead More
5pcs JDY-16 bluetooth 4.2 Module Low Power High Speed Data Transfer Mode BLE Module
$28.46Other Module BoardAdd to cartDescriptionJDY-16 Version supports(WeChat, APP, Android) Transparent, IO, RTC, PWM and other functions1.BLE high speed transparent transmission supports 8K Bytes rate communication2.Send and receive data without byte limit, support 115200 baud rate often send and receive data3.Support 3 modes of work4.Support(serial port, IO, APP) sleep wake up5.Support Wechat Airsync, Wechat applet and APP communication6.Support 4 channel …
5pcs JDY-16 bluetooth 4.2 Module Low Power High Speed Data Transfer Mode BLE ModuleRead More
Reviews
There are no reviews yet.