Chihiros Doctor 3rd Algae inhibitor Device Aquarium Fish Tank Green Plant Remove
$164.01
Plug UK Plug /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Type:Mesh/Whole set
Color:White
Voltage:110-240V
Plug:UK/EU Plug
Weight:508g
Material:Plastic shell
Input Voltage:DC15V, 2.5A
Max Power:30W
TDS Ran ge:50-500
Package included
1X Whole Set Chihiros Doctor
Features
1.Inhibit green algae and promote plants growth
•Inhibit phytoplankton initial growth and reproduction.
•Activate microelements to promote plants growth
•Pro-motion of plants growth activates photosynthesis to stabilize ecosystem.
2 Kill the crustacean pathogenic bacteria
Automatically kill the pathogenic bacteria in the water in each hour through direct and indirect disinfection, which greatly improves the survival rate of juvenile prawns.
3 Depend on strong sterilization capabilities effectively kill pathogens
•Aeromonas hydrophila Aeromonas inchAeromons hydrophilainch, herpes, fungal, coli forms and other 99.9% kill efficiency results test.
4 Safe because of coexistence with filter bacteria
•As there is no residual toxicity, it is limited to aerobic bacteria.
•Compared to UV sterilizer, Chihiros DOCTOR does not work steadily so regenerating and recovery of filter bacteria is rapid.
5 ALC program is intelligent management algorithm
•Aquarium environment changes according to initial, middle, last stage, sterilizing inten-sity and operation cycle is intelligently designed to change by time series.
•As ALC program can simply choose a mode according to a aquarium capacity, it is very easy to use.
6.The new Chihiros Doctor has integrated 3 application covering usage of aquaticplants, fish and shrimp keeping into only a single Doctor device
Q & A
1.How does the Chihiros Doctor works
—It is designed not work all the time, it works bubble come out about every 30seonds
2.Does it hurt fish
—No influence to fish, shrimp and plant
3.Can it use in marine water
—Only used for fresh water
4.How long do I need to clean the mesh
—The new 3rd generation mesh can keep use for long time without clean, but we suggest exchange a new mesh every 6 months
NOTICE
1. If the product is not working properly, please check if the fish tank water quality TDS is too high (adding disinfectant salt or other substances to the water will cause the TDS to be too high). If it is too high, please replace the tap water in the fish tank.
2. The product host should be waterproof, otherwise it will cause the host to burn out and not work.
Weight | 0.508 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.