3Pcs 315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module Board Not Super-heterodyne
$6.80
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Transmitter Module
Specification
Working voltage:3V ~ 12V
Working current:20mA ~ 28mA
Standby current:0mA
Working frequency:315MHz
Transmitter distance:>500m (sensitivity can be above -103dBm if in wide field)
Output power:16dBm (40mW)
Transmitter rate
Modulation mode:OOK (AM)
Working temperature:-10°C ~ +70°C
Size:19 x 19 x 8mm
Feature
Stable performance
Wider range of working voltage
Pins
PIN1 ATAD:data input
PIN2 VCC:power +
PIN3 GND:power –
Application
Wireless calling system, burglar alarm, wireless data transmission, automated data acquisition system
Receiver Module (5V super-regeneration)
Specification
Working voltage:DC 5V
Working current:4mA
Modulation mode:OOK (AM)
Working temperature:-10°C ~ +70°C
Receiving sensitivity:-110dB
Working frequency:315MHz
Size:30 x 14 x 7mm
Feature
Using LC oscillating circuit, include amplification
Output data signal is TTL level
Connect to decoder directly
Pins
PIN1 ANT:antenna
PIN2 VCC:power +
PIN3/4 DATA:data output
PIN5 GND:power –
Application
Wireless remote control switch, remote control socket, data transmission, remote control toys, anti-theft alarm host
Note
The antenna has large impact on reception of the module, the best antenna wavelength is 1/4, and generally use 50Ohm single wire, the antenna length of 315M one is about 23cm.
Also the position of the antenna affect the reception of the module, keep the antenna stretched and away from the shield, high pressure, and interference source as far as possible.
Package included
3 x 315MHz RF Wireless Receiver module
3 x 315MHz RF Wireless Transmitter module
Weight | 0.015 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.