24V 36V 48V 60V BMS 6-20S 50A 80A 120A 150A 3.2V LifePo4 Battery Protection Board with Temperature Control Separate Port Version
$61.22
Current 50A / Current 80A / Current 120A /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Tips
1. The current of the selected protection board is different, the number or model of the MOS tube on the board is different, the actual product shall prevail
2. For batteries with different numbers of strings, you only need to short-circuit the cable from B+ to the number of strings you need.
3. Do not insert the flat wire into the terminal before connecting the protection board, remember! Wrong cable connection will burn the protection board!
4. Connect the ribbon cable and the battery in order, check that the adjacent voltage is correct, and then insert the ribbon cable; then use a short and thick wire to connect to B-, and then to C-(P-).
5. Please install the protection board close to the negative pole of the battery. The wire connecting B- should be as short and thick as possible, and the length should be controlled within 10cm. It is recommended that the 50A version use 4 square wires and the 80A version use 6 square wires. The B- connection is too long or too thin will cause a series of problems such as failure to start, power failure during operation and so on.
Features
The board adopts mature protection circuit, original dedicated protection IC, 100A high current low internal resistance MOS (single MOS internal resistance as low as 4.2 milliohms), with perfect and stable charging and discharging protection functions.
Small size and large current can be used in large current occasions such as electric tools, electric vehicles, UPS, etc.
Electric vehicle type:Motor wattage:Recommended protection board
Two-wheel electric vehicle:500-800W:50A
800-1000W:80A
>1000W:120A
Three-wheeled electric vehicle:ordinary:800-1000W:80A
>1000W:120A
Cargo:120A/150A
Four-wheel electric vehicle:120A/150A
Package Included
1x BMS 6-20S 50A 80A 120A 150A 3.7V Li-ion Battery Protection Board Separate Port Version
Weight | 0.12 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.