1.2v – 12v Battery Capacity Meter Tester for 18650 li-ion/lead-acid Battery
$28.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply voltage:DC4.5-6V (micro USB connector)
Operating Current:less than 70mA
Discharge voltage:1.00V-15.00V 0.01V resolution
Termination voltage range:0.5-11.0V
Supported by current:3.000A 0.001A resolution
Maximum voltage measurement error:1% + 0.02V
Maximum current measurement error:1.5% + – 0.008A
Maximum battery capacity range:9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X.XXX, as shown above to achieve 10Ah XX.XX, and so on.
Board size:50mmX37mm
Finished Size:50mmX37mmX17mm (length X width X height maximum position size, contains copper foot height)
Features
ZB2L3 battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650 Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results.
Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge.
Maximum capacity statistics support 9999Ah (9999000mAh).
Automatically identify and develop appropriate battery termination voltage can also be manually adjusted.
Instructions
1. The first test should be fully charged battery.
2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage.
3. Direct start test need only one press of the inchOKinch button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing inch+inch or inch-inch buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the inchOK inchstart testing.
4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press inchOKinch to terminate flashing allows stable data display, press again inchOKinch button to return to the power-on state can just replace the battery test the next section .
Error codes and their meanings
Err1:battery voltage is above 15V
Err2:battery voltage is lower than the termination voltage
Err3:Battery can not afford to load or discharge current line too much resistance
Err4:overcurrent (current exceeds 3.1A)
Package Included
1pcs Battery Capacity Meter Tester
2pcs load resistors
Weight | 0.026 kg |
---|
Customers Also Viewed
24S 72V Lithium Battery 3.2V Power Protection Board 30A-180A with Temperature Protection Equalization Function Overcurrent Protection BMS PCB
$60.74Battery Protection ModuleAdd to cartCurrent 30A / Current 40A / Current 50A / Current 60A / Current 70A / Current 100A / Current 130A / Current 150A / Current 180A /
ONLY LED Light Lighting Kit for Lego 42096 Technic Porsche 911 RSR Bricks Toys
$18.50DIY Electronic KitsAdd to cartDescriptionInterface:USBColor:As the picture shownFitmentONLY For Lego Technic Porsche 911 RSR (42096) Bricks ToysFeaturesEasy to install.LED powered by USB.Make your model more cool.ONLY For Lego 42096 Technic Porsche 911 RSR Bricks.Package Included1 x LED Light Kit(Model Not Included)1 x Battery Case
500mL Clear Borosilicate Glass Filtering Flask Vacuum Filtration Flask Bottle Lab Glassware
$40.49Glassware KitAdd to cartDescription– Flasks are glass or plastic containers for storing or collecting chemical samples or solutions in scientific laboratories.– It shaped like a cone with a wide, flat base that narrows to a neck opening, which can be closed with a stopper or cap.SpecificationMaterial:Borosilicate GlassCapacity:500mLFlask Style:Filtering (vacuum)Package Included1 x Glass Filtering Flask
2400mAh Portable Solar Panel Charger Reusable Solar Generator System USB Port with Lamp Lighting
$64.79Solar GeneratorAdd to cartFeature1.Reusable solar generator, solar charging, environmental protection and energy saving, you can use it in anywhere when there is adequate sunshine.2.Equipped with USB charging cable, you can charge your electronic products easily with the built-in large capacity battery, you can charge for mobile phones, MP3, MP4, digital cameras and other electronic products.3.White LED light and …
20pcs Sensor Shield V5.0 Sensor Expansion Board for DIY Electronic Building Blocks of Robot Parts
$62.36Sensor & Detector ModuleAdd to cartFeaturesLatest Sensor Shield V5.0 sensor expansion board is still before laminated design PCB Immersion Gold processing technology, the motherboard is not only Duemilanove 2009 controller of digital and analog interface extended to the steering gear line order form, also ad hoc IIC interface, 32 Servo controller interface , bluetooth module communication interface, SD card module …
Reviews
There are no reviews yet.