220V 3KW Variable Frequency inverter Vector Control 1 Phase to 3 Phase Frequency inverter
$315.89
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Name:Variable Frequency Inverter
Model:LK350-3.0G1
Color:black
Input:1PH AC 220-240V±10% 50-60Hz
Output:3PH 0-500Hz
Output:11.5A
Power:3KW
Control Method:voltage vector
Braking Resistor:100Ω
WANT TO FIND MORE INFORMATION, PLEAE CLICK HERE~~ Instructions
Features
-Built-in PID control function, can easily constitute a simple automated control system.
-Frequency setting mode:digital setting, analog setting, serial communication setting, PID setting and so on.
-Other functions:deceleration stop or freewheel stop, DC brake, automatic reset restart, PLC program control and so on.
-Provide a variety of fault protection:over-current, overvoltage, undervoltage, over temperature, phase loss, overload and other protection.
Safety Precaution
– Do not arbitrarily reform the inverter.
– Do not do the voltage withstand test on the inverter.
– Do not connect the contactor with the output circuit.
– When power is on, do not change the wiring and terminal.
– Do not connect the power to the U, V, W output terminals.
– Before wring, please make sure that the input power is off.
– The grounding terminals must be connected with the ground.
– Please connect the brake resistor according to the wiring diagram.
– The wring work should be operated by the professional electrical engineer.
– Cut off the main circuit power before doing some check and maintain work.
– Having paused circuit wiring emergently, please make sure that the check is effective.
– Do not touch the terminals of inverter, which are very dangerous because there is high voltage on them.
– Confirm that the operation signal is cut off. Before reset the alarm device,or the inverter may start suddenly.
– Please check whether the voltage of the AC main circuit power is consistent with the rated voltage of the inverter.
– Mare sure to install a protection cover before power-on. When removing the cover, be sure to make the power off.
– Do not connect the output wire of the inverter with the shell, and pay attention that the output wire should not be short-circuited.
– If you want to reset the inverter with the retry function, do not get close to the mechanical equipment, because the inverter will restart suddenly when the alarm stops.
Package Included
1 x Variable Frequency Inverter
1 x Manual
Weight | 1.341 kg |
---|
Customers Also Viewed
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubator
$56.69Switch AccessoriesAdd to cartFeatures– Made of high quality ABS material, insulating, stable and durable.– LED lamp head, high power, strong light source, can clearly detect the hatching of eggs.– Using high-quality materials, safe and durable, with buttons that are easy to open and close.– Suitable for hatching eggs, but also for children and students to learn the process …
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubatorRead More
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle Adjustable
$34.82Other Module BoardAdd to cartProduct Introduction1. Operating Voltage:5-30V,support micro USB 5.0V power supply2. Frequency Range:1Hz~150KHz3. Frequency Precision:2%4. Signal Load Capacity:output current is within 8–30mA5. Output Range:default 5V V-pp (can be changed by external power)6. Ambient Temperature:-30 Celsius ~70 Celsius Application Fields1. As square wave generator to generate square wave for experiment development2. Used to drive steeping motor driver’s square …
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle AdjustableRead More
3.7V Lithium Battery 4 Paragraph Power indicator Module
$4.36Test & Measuring ModuleAdd to cartDescription1, onboard high precision voltage detection chip and power supply voltage chip2, onboard four power indicator LED lights, three kinds of color display, red, yellow, yellow, green,representing 20%, 50%, 80%, 100% of the battery3, set aside a battery testing interface and two positioning hole4, PCB size:22.2 (mm) x17.2 (mm)Package included1 x 3.7V Lithium Battery 4 …
3.7V Lithium Battery 4 Paragraph Power indicator ModuleRead More
YAHBOOM High-quality T-shape Expansion Board + 40Pin GPIO Flat Rainbow Ribbon Cable for Raspberry 4B/3B+/ZERO/W
$10.21Raspberry Pi & Orange PiAdd to cartDescriptionThis high-quality T-shape expansion board allows you to connect the Raspberry Pi GPIO port for breadboard experiments. We will provide a 40Pin soft cable for you to connect the Raspberry Pi board to the breadboard.FeaturesSpecifically designed for Raspberry Pi 4B/3B, Raspberry Pi 2B, Raspberry Pi 1B+, Raspberry pi 1A+, Raspberry Pi zero W, Raspberry Pi …
10pcs LM3915 10-segment Audio Level indicator Kit Electronic Soldering Training experiment DIY Parts
$33.89DIY Electronic KitsAdd to cartFeatrurePower supply:DC9-12VPCB size:62*27mm1 audio cable is needed. One end is subtracted and connected to the audio input port. The red cable is connected to AUDIO +, the green cable is connected to ADUIO-, and the blue cable is subtracted, do not need to solder.Package included10 x LM3915 10-segment Audio Level Indicator Kit
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 Degree
$55.12Electronic Accessories & SuppliesAdd to cartFeatureColding side posts with the wordsHeating side is emptyRed wire to positive, black wire to the negative, it generate electricity when the temperature difference happenedSpecificationModel:SP1848-27145 Color:whiteLead Length:about 30CMSize:40MM x 40MM x 3.4MM20 degree temperature difference:open-circuit voltage 0.97V, generated current:225MA40 degree temperature difference:open circuit voltage 1.8V, generated current:368MA60 degree temperature difference:open circuit voltage 2.4V, generated current:469MA80 …
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 DegreeRead More
Reviews
There are no reviews yet.