220V 3KW Variable Frequency inverter Vector Control 1 Phase to 3 Phase Frequency inverter
$315.89
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Name:Variable Frequency Inverter
Model:LK350-3.0G1
Color:black
Input:1PH AC 220-240V±10% 50-60Hz
Output:3PH 0-500Hz
Output:11.5A
Power:3KW
Control Method:voltage vector
Braking Resistor:100Ω
WANT TO FIND MORE INFORMATION, PLEAE CLICK HERE~~ Instructions
Features
-Built-in PID control function, can easily constitute a simple automated control system.
-Frequency setting mode:digital setting, analog setting, serial communication setting, PID setting and so on.
-Other functions:deceleration stop or freewheel stop, DC brake, automatic reset restart, PLC program control and so on.
-Provide a variety of fault protection:over-current, overvoltage, undervoltage, over temperature, phase loss, overload and other protection.
Safety Precaution
– Do not arbitrarily reform the inverter.
– Do not do the voltage withstand test on the inverter.
– Do not connect the contactor with the output circuit.
– When power is on, do not change the wiring and terminal.
– Do not connect the power to the U, V, W output terminals.
– Before wring, please make sure that the input power is off.
– The grounding terminals must be connected with the ground.
– Please connect the brake resistor according to the wiring diagram.
– The wring work should be operated by the professional electrical engineer.
– Cut off the main circuit power before doing some check and maintain work.
– Having paused circuit wiring emergently, please make sure that the check is effective.
– Do not touch the terminals of inverter, which are very dangerous because there is high voltage on them.
– Confirm that the operation signal is cut off. Before reset the alarm device,or the inverter may start suddenly.
– Please check whether the voltage of the AC main circuit power is consistent with the rated voltage of the inverter.
– Mare sure to install a protection cover before power-on. When removing the cover, be sure to make the power off.
– Do not connect the output wire of the inverter with the shell, and pay attention that the output wire should not be short-circuited.
– If you want to reset the inverter with the retry function, do not get close to the mechanical equipment, because the inverter will restart suddenly when the alarm stops.
Package Included
1 x Variable Frequency Inverter
1 x Manual
Weight | 1.341 kg |
---|
Customers Also Viewed
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch Module
$16.24Sensor & Detector ModuleAdd to cartDescriptionIt uses Doppler radar technology, with auto-sensing capabilities to control other product,High sensitivity, sensor distance, reliability, wide angle sensor,Wide supply voltage range and other characteristics. Widely used in lighting situations,anti-theft alarm situations.Features1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their …
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch ModuleRead More
24V Air Parking Heater Flame Sensor Igniters Flame Detecter 82306B for Webasto Air top 2000
$70.86Solar CollectorsAdd to cartSpecificationsBrand Name:AutoleaderMaterial:Silicon NitrideOEM:82306BItem weight:11gFeaturesThis product is mainly made of silicon nitride ceramic substrate, with tungsten filament as the heat source, tungsten wire embedded in silicon nitride matrix, via hot-press sintering process to form an organic whole, then through grinding, welding wire, thus made the ignition components.Fitmentfor Webasto Air Top 2000Package Included1x Parking Heater Senser
L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based on ESP12E
$9.79Expansion Board & ShieldAdd to cartL293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E For Specifications 1. Motor power (VM):4.5 ~ 36V 2. Control power (VIN):4.5V ~ 9V(10V MAX) 3. Provide the shortcut connector (short by VM and VIM), thus can use 4. May use common power source (4.5V~9V) by shorting VM …
220V 1000W Hot Plate Electric Iron Burner Heating Stove Heater Household Laboratory Heating Equipments
$52.64Laboratory Heating EquipmentsAdd to cartSpecificationsType:Electric Stove BurnerPlug Type:EUColor:WhiteVoltage:220VPower:1000WRegulating temperature:5 LevelsMaterial:Stainless Steel + IronSize:14*14*5CM (5.5*5.5*2in)Features– Adopted iron shell, thicken panel, material sturdy and durable to use– Portable single burner with 500 watts of power– Powered by electric, do not need fuel, eco-friendly– Easy-to-use temperature-setting knob for low, medium, or high heat– Provides quick and sustained heat; power indicator light– Single …
Reviews
There are no reviews yet.