3pcs 1 Channel 5V USB Relay Switch Programmable Computer Control for Smart Home Module
$20.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Tip
It is recommended to use under win7, XP, win10 customer feedback can be used, and some can not, please consider carefully before placing an order.
Introduction
The module adopts HID technology, the quality of foreign trade, no need for any driver, the download data comes with the application, plug, and play. Support WIN7, XP 32-bit, 64-bit system, easy to use. We provide application and C++ secondary development library code, no VB code, but all DLL files, so whether you can operate on VB, you need to be familiar with VB friends to try.
Module application
Home intelligent switch control, hotel intelligent switch, the hotel intelligent electrical control, intelligent greenhouse, shopping mall intelligent switch, company plant intelligent switch, Internet cafe timing management, karaoke timing control, object network, industrial equipment, test equipment power control, street light management, intelligent management, centralized power management, etc.
Module description
1. The onboard square USB interface, stable connection
2. Use imported high-performance USB control chip
3. Using a special relay to drive the chip ULN2803, the relay works more stable
4. Use genuine relay
5. Military-grade PCB board production
6. Board power socket and terminal, two ways to access the power supply are convenient and flexible. When the power is connected, the relay can remain set even if the computer is turned off or the USB is removed from the computer.
7. Fixed hole size:3mm
Note:Due to the characteristics of the USB protocol, this module is not suitable for use in places with large electromagnetic interference! If you want to use it, please do electromagnetic shielding and buy a good USB data cable with electromagnetic shielding.
Product parameters
Input voltage:DC 5V
Input current:greater than 300mA
Wiring method:NC/COM/NO
Relay parameters
Maximum control AC 250V, 10A AC load and maximum DC30V 10A DC load
Chinese and English software interface
1. Green indicates that the relay is closed and red indicates disconnection
2. After the device is turned on, the software automatically obtains the working status of the current relay.
Package includes
3 x Relay Module
Weight | 0.06 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.