5Pcs 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$125.01
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
This is 1002 HIFI ,If you need other parameters, please click ID to buy.
502C HIFI ID:1582750
502L MINI ID:1652630
1002L MINI ID:1652631
Specifications
Features
– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.
– TPA3116D2 is a type D amplifier IC launched by TI company, which has very high index parameters.The maximum modulation frequency is 1.2MHZ, and the high power output distortion is less than 0.1%.
– The red and gray ring inductors are specially designed for digital power amplifiers, featuring low loss, high bandwidth and high fidelity.
– The 684 film capacitor is a special capacitor for audio amplifier, which has the characteristics of low loss, high bandwidth and high fidelity.
– With AUX and bluetooth two audio source input mode, two in one.
– Potentiometer adjust volume, easy to control volume, very suitable for DIY speakers.
– Copper DC female head, fence terminal, withstand large current, no heat, no damage to the line, good wiring, not easy to short circuit.
– 5.0 bluetooth version, higher transmission efficiency, longer transmission distance.
Note
The power switch on the board is standby switch, and the machine is in standby state with low power consumption after the switch is turned off. To completely turn off the power or to remove the DC plug on the machine for a long time, it is ok.
Question and Answers
1. How to choose the power source
The board’s power supply is crucia1.The higher the voltage, the greater the current, the more power output, if you only have 12V/1A, this can carry 3-4 inch speakers.If you are above 19V/5A, 8-10 inches is fine.Power supply must be highly valued.If the voltage is too low, the sound will easily cause distortion after amplification. If the current is too low to carry the speaker, the voltage will be pulled down, and the work will be abnormal or the sound quality will be poor.
It is recommended to use 18V19V24V power supply with current above 5A.If you only have 9V12V or 1A 2A power supply, you can also use it with low power. Be careful when using it at the maximum volume, it may cause distortion and affect the sound quality.
2. How to choose the speaker
Common speakers are usually 8 ohms, can not distinguish between positive and negative polarity, the effect is the same, 4 ohms can also be used.If your horn power is small, it may be between 10W and 30W can also be used. The power supply voltage is small to prevent the speaker from burning down after playing loudly. For example, choose the power supply below 15V.If you are a 50w-300w speaker, don’t worry about the speaker burning problem, you can choose a 12-24v power supply, the higher the selected voltage, then the greater the output sound or power.
3. How to choose bluetooth or AUX audio input mode
Power up the power amplifier board, connect to the speaker, rotate the audio knob and the blue indicator light turns on, turn on the phone Settings — bluetooth — search to ‘bt-wuzhi’, and then click connect, after connecting successfully, there will be ding dong prompt sound, at this time for bluetooth mode, play music can, next time on the power will automatically connect back with the phone.
If you want to use AUX audio input, then disconnect the bluetooth connection, there will be an audio prompt, insert the audio cable to play music.IN AUX (LINE IN) mode, the connection bluetooth automatically converts to bluetooth mode.
4. It’s ok if the sound is small, but when the sound becomes larger, the sound will be turbid.
The sound has been distorted. Please replace the adapter with a higher voltage level.
5. It’s ok if the voice is small, but when the voice becomes louder, the sound will slow down.
The power of the input power is insufficient, and the power supply itself is intermittent power failure protection, please replace the power supply with higher power;Or if the power is too large, the power amplifier plate generates serious heat, and the situation of thermal protection occurs. Reduce the power to use or check whether the heat sink fits well to strengthen the heat dissipation.
Package Included
5 x 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier
Weight | 0.66 kg |
---|
Customers Also Viewed
5pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$17.37Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …
MTOLASER 100mW 405nm Blue-violet Dot Laser Module Generator Variable Focus industrial Marking Position Alignment Diode Generator
$71.59Laser ModuleAdd to cartDescriptionThis variable focus 100mW 405nm Blue-violet dot laser module employs qualified 405nm red laser diode, generates the stable and reliable blue-violet laser dot applicable for various industrial alignments and positioning work. Compact size, easy to install, multi-angle adjustment of installation, easy to operate.SpecificationBrand:MTOLASERLaser Power:100mWWavelength:405nmBeam Shape:Dot Variable Focus:YESOutput Light:Visible LightWorking Voltage:DC 5VWorking Current:30-210mAOptics:Focus Lens Shell Material:Aviation …
DIY WiFi(APP Version) bluetooth Colorful Canton Tower LED Lighting Cube Music Spectrum Electronic Kit
$52.47DIY Electronic KitsAdd to cartDescription1. Offline animation increased to 20 species, 4 +1 spectrum modes, each animation has been carefully designed and debugged,the effect is very brilliant.2. The WiFi module and bluetooth module after careful PCB design and debugging, straight line transmission distance up to 10-20 meters.3. Phone bluetooth connection, available phone with the sound playback music. After using …
10pcs CJMCU-4599 Si4599 N and P Channel 40V (D -S) MOSFET Expansion Board Module
$24.37Expansion Board & ShieldAdd to cartFeaturesHalogen-freeTrenchFET power MOSFET100% UIS TestedApplicationsBackling inverter for LCD displayFull bridge converterPackage Included10 x CJMCU Expansion Board ModuleSize:8cm x 8cm x 5cm (3.15in x 3.15in x 1.97in)
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry Pi
$36.73Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesSupports any revision of Raspberry Pi (directly-pluggable)Onboard 4 ≠ 8 RGB LED (WS2812B)Control pin is configurable via jumpers (0┯ resistor)Break out control pins, easy for working with other MCUComes with development resources …
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry PiRead More
IR908-7C PT908-7C SideTransmitter and Receiver Paired Tube 1.5mm Transparent 940nm
$2.82Electronic Accessories & SuppliesAdd to cartFeaturesHigh sensitivitySmall junction capacitancePb freeDescriptionsPT908-7C is a phototransistor in miniature package which is molded in a water clear plastic with spherical top view lens.The device is spectrally matched to infrared emitting diode.ApplicationsOptoelectronic switchVCR ,Video CameraFloppy disk driveInfrared applied systemSpecificationModel:IR908-7C.PT908-7COutput form:NPN transistor typeChannel:single channelOutput wavelength:940 nmPackage included1 x IR908-7C phototransistor1 x PT908-7C phototransistor
20pcs ME2-CO-14×14 Carbon Monoxide Gas Sensor CO Sensor 0~1000 ppm for Civilian Area to Detect CO Concentration Carbon Monoxide Detector CO Alarms
$67.68Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openPrinciple IntroductionWinsen Electronics, produces Carbon monoxide sensor CO gas sensor, with low cost and fuel cell working principle.ME2-CO-14×14, fuel cell type sensor, detects gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current …
6inch/150mm Aluminum 12V DC Max Load 1000N Linear Actuator Electric Putter Motor
$111.36Switch AccessoriesAdd to cartFeatures* Wear-resistant, smooth appearance, high compressive strength.* Maximum thrust 6000N.* Easy to use.SpecificationMaterial:Aluminum + PlasticColor:SilverSize:28 x 8cmInput:12V DCStroke:6 inch/ 150mmMax load:1000NSpeed:12 /sPackage included1 x Electric putter2 x Bracket
Reviews
There are no reviews yet.