3Pcs 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$79.45
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
This is 1002 HIFI ,If you need other parameters, please click ID to buy.
502C HIFI ID:1582750
502L MINI ID:1652630
1002L MINI ID:1652631
Specifications
Features
– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.
– TPA3116D2 is a type D amplifier IC launched by TI company, which has very high index parameters.The maximum modulation frequency is 1.2MHZ, and the high power output distortion is less than 0.1%.
– The red and gray ring inductors are specially designed for digital power amplifiers, featuring low loss, high bandwidth and high fidelity.
– The 684 film capacitor is a special capacitor for audio amplifier, which has the characteristics of low loss, high bandwidth and high fidelity.
– With AUX and bluetooth two audio source input mode, two in one.
– Potentiometer adjust volume, easy to control volume, very suitable for DIY speakers.
– Copper DC female head, fence terminal, withstand large current, no heat, no damage to the line, good wiring, not easy to short circuit.
– 5.0 bluetooth version, higher transmission efficiency, longer transmission distance.
Note
The power switch on the board is standby switch, and the machine is in standby state with low power consumption after the switch is turned off. To completely turn off the power or to remove the DC plug on the machine for a long time, it is ok.
Question and Answers
1. How to choose the power source
The board’s power supply is crucia1.The higher the voltage, the greater the current, the more power output, if you only have 12V/1A, this can carry 3-4 inch speakers.If you are above 19V/5A, 8-10 inches is fine.Power supply must be highly valued.If the voltage is too low, the sound will easily cause distortion after amplification. If the current is too low to carry the speaker, the voltage will be pulled down, and the work will be abnormal or the sound quality will be poor.
It is recommended to use 18V19V24V power supply with current above 5A.If you only have 9V12V or 1A 2A power supply, you can also use it with low power. Be careful when using it at the maximum volume, it may cause distortion and affect the sound quality.
2. How to choose the speaker
Common speakers are usually 8 ohms, can not distinguish between positive and negative polarity, the effect is the same, 4 ohms can also be used.If your horn power is small, it may be between 10W and 30W can also be used. The power supply voltage is small to prevent the speaker from burning down after playing loudly. For example, choose the power supply below 15V.If you are a 50w-300w speaker, don’t worry about the speaker burning problem, you can choose a 12-24v power supply, the higher the selected voltage, then the greater the output sound or power.
3. How to choose bluetooth or AUX audio input mode
Power up the power amplifier board, connect to the speaker, rotate the audio knob and the blue indicator light turns on, turn on the phone Settings — bluetooth — search to ‘bt-wuzhi’, and then click connect, after connecting successfully, there will be ding dong prompt sound, at this time for bluetooth mode, play music can, next time on the power will automatically connect back with the phone.
If you want to use AUX audio input, then disconnect the bluetooth connection, there will be an audio prompt, insert the audio cable to play music.IN AUX (LINE IN) mode, the connection bluetooth automatically converts to bluetooth mode.
4. It’s ok if the sound is small, but when the sound becomes larger, the sound will be turbid.
The sound has been distorted. Please replace the adapter with a higher voltage level.
5. It’s ok if the voice is small, but when the voice becomes louder, the sound will slow down.
The power of the input power is insufficient, and the power supply itself is intermittent power failure protection, please replace the power supply with higher power;Or if the power is too large, the power amplifier plate generates serious heat, and the situation of thermal protection occurs. Reduce the power to use or check whether the heat sink fits well to strengthen the heat dissipation.
Package Included
3 x 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier
Weight | 0.396 kg |
---|
Customers Also Viewed
3000W Power inverter DC 12V to AC 220V Boat Car inverter USB Charger Converter
$56.69InvertersAdd to cartSpecificationsName:Car power inverter 3000W.Input voltage:DC 10.5V~15V,Output frequency is:60HzSurge power:3000WContinous power:300WOutput waveform:Modified sine wavePackage Size:7.3′ x 4.0′ x 5.8′Weight:0.6 kgAdavantage[3000W Power inverter] Car power inverter with 2 USB ports and AC outlet. surge power:3000W.[ Fast Charging Dual USB ports] can charge most phones and tablets simultaneously (Max 4.1A), while AC outlets great for laptop, CPAP machine, …
3000W Power inverter DC 12V to AC 220V Boat Car inverter USB Charger ConverterRead More
5pcs 2*13 USB Mini Voice Control Music Audio Spectrum Flash Volume Level Red LED Display Module
$37.14Display ScreenAdd to cartFeatures1. Comes with a microphone, do not take the audio cable.2. Power 5V (USB interface power supply)3. High brightness:all using authentic Taiwan billion light bright LED4. Using a single-chip drive, the frequency spectrum is better, not bright and clear high brightness.5. Sensitivity to sound, 10 adjustable.Size:39.5mmx15mmx10mmColor:RedPackage Included5 x 2*13 USB Mini Audio LED Display Module
AC Volt Meterr Ammeter Din Rail LED Multifunction Digital Meter
$66.81Switch AccessoriesAdd to cartDescriptionThis din rail LED AC multifunctional digital meter can display voltage,current,active power,reactive power andpower factor simultaneously.It is suitable for electric power systems, home, power distribution box, electricalmachinery and equipment monitoring the power grid and power parameters.SpecificationsMeasuring Voltage Range:AC 80-300VMearuring Current Resolution Ratio:0-100.0A>10A:0.1AActive Power:0-30000WReacitive Power:0-30000VAPower Factor:COSφ=1.000-0.000Measuring Speed:2 times/secondAccuracy:1%,±2 wordsDin Rail Size:35mm din railSize:54*80*64 mmFeatures1. Din rail …
AC Volt Meterr Ammeter Din Rail LED Multifunction Digital MeterRead More
CJMCU-35 LPS35HW Pressure Sensor Waterproof and Moisture-proof Height Sensor Module Absolute Barometer
$28.42Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.IntroductionLPS35HW is an ultra-compact piezoresistive, digital pressure sensor with output barometer.The device includes a sensing element and an IC interface. The sensing element that communicates through IIC or SPI can detect absolute …
Low Pass Filter Bass Subwoofer Preamp Amplifier Board Single Power DC 9-32V Preamplifier with Bass Volume Adjustment
$16.97Amplifier BoardAdd to cartDescriptionThe so-called low-pass filter to filter out the human voice board is more than treble part, retain the low frequency part is amplified to improve the bass reproduction efforts, people will not hear the sound of musical instruments and high-frequency sound during playback. FeaturesPower supply voltage:DC 9V-32V single power supplyDual channel input, subwoofer output, then …
10pcs 0038 1738 integrated Universal Receiver infrared Receiver Tube module
$4.36Electronic Accessories & SuppliesAdd to cartDescriptionReceiving range:12-13 metersVoltage range:2.7V-5.5VPin pitch 2.5MMFront Side:First Foot is OUT, Second Foot is GND, Third Foot is VCC.Package included10 x 0038 1738 Integrated Universal Receiver Infrared Receiver Tube
Reviews
There are no reviews yet.