3Pcs 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$79.45
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
This is 1002 HIFI ,If you need other parameters, please click ID to buy.
502C HIFI ID:1582750
502L MINI ID:1652630
1002L MINI ID:1652631
Specifications
Features
– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.
– TPA3116D2 is a type D amplifier IC launched by TI company, which has very high index parameters.The maximum modulation frequency is 1.2MHZ, and the high power output distortion is less than 0.1%.
– The red and gray ring inductors are specially designed for digital power amplifiers, featuring low loss, high bandwidth and high fidelity.
– The 684 film capacitor is a special capacitor for audio amplifier, which has the characteristics of low loss, high bandwidth and high fidelity.
– With AUX and bluetooth two audio source input mode, two in one.
– Potentiometer adjust volume, easy to control volume, very suitable for DIY speakers.
– Copper DC female head, fence terminal, withstand large current, no heat, no damage to the line, good wiring, not easy to short circuit.
– 5.0 bluetooth version, higher transmission efficiency, longer transmission distance.
Note
The power switch on the board is standby switch, and the machine is in standby state with low power consumption after the switch is turned off. To completely turn off the power or to remove the DC plug on the machine for a long time, it is ok.
Question and Answers
1. How to choose the power source
The board’s power supply is crucia1.The higher the voltage, the greater the current, the more power output, if you only have 12V/1A, this can carry 3-4 inch speakers.If you are above 19V/5A, 8-10 inches is fine.Power supply must be highly valued.If the voltage is too low, the sound will easily cause distortion after amplification. If the current is too low to carry the speaker, the voltage will be pulled down, and the work will be abnormal or the sound quality will be poor.
It is recommended to use 18V19V24V power supply with current above 5A.If you only have 9V12V or 1A 2A power supply, you can also use it with low power. Be careful when using it at the maximum volume, it may cause distortion and affect the sound quality.
2. How to choose the speaker
Common speakers are usually 8 ohms, can not distinguish between positive and negative polarity, the effect is the same, 4 ohms can also be used.If your horn power is small, it may be between 10W and 30W can also be used. The power supply voltage is small to prevent the speaker from burning down after playing loudly. For example, choose the power supply below 15V.If you are a 50w-300w speaker, don’t worry about the speaker burning problem, you can choose a 12-24v power supply, the higher the selected voltage, then the greater the output sound or power.
3. How to choose bluetooth or AUX audio input mode
Power up the power amplifier board, connect to the speaker, rotate the audio knob and the blue indicator light turns on, turn on the phone Settings — bluetooth — search to ‘bt-wuzhi’, and then click connect, after connecting successfully, there will be ding dong prompt sound, at this time for bluetooth mode, play music can, next time on the power will automatically connect back with the phone.
If you want to use AUX audio input, then disconnect the bluetooth connection, there will be an audio prompt, insert the audio cable to play music.IN AUX (LINE IN) mode, the connection bluetooth automatically converts to bluetooth mode.
4. It’s ok if the sound is small, but when the sound becomes larger, the sound will be turbid.
The sound has been distorted. Please replace the adapter with a higher voltage level.
5. It’s ok if the voice is small, but when the voice becomes louder, the sound will slow down.
The power of the input power is insufficient, and the power supply itself is intermittent power failure protection, please replace the power supply with higher power;Or if the power is too large, the power amplifier plate generates serious heat, and the situation of thermal protection occurs. Reduce the power to use or check whether the heat sink fits well to strengthen the heat dissipation.
Package Included
3 x 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier
Weight | 0.396 kg |
---|
Customers Also Viewed
PLZ 35-4400MHz Simple Spectrum Sweep Frequency Signal Source Power Meter CNC Aluminum Alloy Case
$116.99RF amplifierAdd to cartFeatures1. Signanl generator and spectrum analyzer frequency range:35M-4.4G2. MIN step:1K3. Output power(reference):0dBm@1G4. Frequency accuary(calibration):+-0.1k@1GHz5. Spectrum analyzer max liner input power:-10dBm6. Spectrum analyzer not damage input power:+10dBm7. MiniUSB power:+5V/0.3A8. Interface:USB, SMA@50┯9. Size(L*W*H):88*59*13mm10. Weight:140g11. Support XP/WIN7/WIN10 systemsPackage included1 x Spectrum analyzer 1 x USB cable
3Pcs DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$28.42Power Supply ModuleAdd to cartSpecificationModule name:400W boost constant current moduleModule nature:non-isolated boost module (BOOST)Input voltage:DC8.5V-50VInput current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipationStatic working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)Output voltage:10-60V continuously adjustable (suitable for applications where the input …
2Pcs 65*27mm Orange+Transparent Color Rubber Wheels for TT Motor Smart Chassis Car
$8.45Smart Robot & Solar PanelAdd to cartSpecifications– Diameter:65mm– Width:27mm– Centre hole:5.3 x 3.66mm (two sides is semicircle)– Material:Rubber(TPE)– Weight:about 50g– Color:Orange– For:TT motor/Smart Chassis Car DIY Part– Quantity:2PcsPackage Included2 x Orange Wheels
100 pcs DC 5V 5mW 650nm 6mm Laser Dot Diode Module Red Copper Head Tube
$44.86Other Module BoardAdd to cartFeaturesWorking life:more than 2000 hoursSpot mode:dot facula, continuous outputLaser wavelength:650nm (red)Copper head diameter:6mmLight powerSupply voltage:5V DCOperating currentOperating temperature:-36→ ~ 65→Power lead length:120mmShell material:brassSingle weight:1gPackage included100 x Laser diode dot
5pcs FXD-82B 12V Battery indicator Board Module Load 4 Digit Electricity indication with LED Lamp
$16.89Other Module BoardAdd to cartSpecificationsOn-board high-precision voltage detection chip and power supply voltage regulator chip onboard 4 power indicator LED lamp, divided into 3 colors display, red, yellow, yellow, green represents 20%, 50%, 80%, 100 (%) of the electricity Three Reserve a battery test interface and two mounting holes on-board high-precision voltage detection chip and power supply voltage regulator …
8FT 2.4m Strong Nylon Mesh Fishing Net Bait Easy Throw Hand Casting 3/4 w/ Sinker
$113.39Mesh & Wire ClothAdd to cartSpecificationName:Fishing NetMaterial:Nylon+GalvanizedColor:brownDiameter:2.4mFeatures1. Strong and durable material.2. Easy to use.3. Help you get more fish.Package Included1 x Fishing Net
1500 Pcs 2pF-0.1F Ceramic Capacitors Kit 30 Types with Component Box
$47.10Electronic Accessories & SuppliesAdd to cartFeatureCapacity:2pF-0.1μFCapacity:Quantity:Capacity:Quantity:Capacity:Quantity2pF:10:75pF:10:2200pF (2.2nF 222):103pF:10:82pF:10:3300pF (3.3nF 332):105pF:10:100pF (101):10:4700pF (4.7nF 472):1010pF:10:150pF (151):10:6800pF (6.8nF 682):1015pF:10:220pF (221):10:10nF (103):1022pF:10:330pF (331):10:15nF (153):1030pF:10:470pF (471):10:22nF (223):1033pF:10:680pF (681):10:47nF (473):1047pF:10:1000pF (1nF 102):10:68nF (683):1068pF:10:1500pF (1.5nF 152):10:100nF (0.1uF 104):10Package includes1500 x Ceramic Capacitors5 x Component Box
3pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$11.02Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …
Reviews
There are no reviews yet.