1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
This is 1002 HIFI ,If you need other parameters, please click ID to buy.
502C HIFI ID:1582750
502L MINI ID:1652630
1002L MINI ID:1652631
Specifications
Features
– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.
– TPA3116D2 is a type D amplifier IC launched by TI company, which has very high index parameters.The maximum modulation frequency is 1.2MHZ, and the high power output distortion is less than 0.1%.
– The red and gray ring inductors are specially designed for digital power amplifiers, featuring low loss, high bandwidth and high fidelity.
– The 684 film capacitor is a special capacitor for audio amplifier, which has the characteristics of low loss, high bandwidth and high fidelity.
– With AUX and bluetooth two audio source input mode, two in one.
– Potentiometer adjust volume, easy to control volume, very suitable for DIY speakers.
– Copper DC female head, fence terminal, withstand large current, no heat, no damage to the line, good wiring, not easy to short circuit.
– 5.0 bluetooth version, higher transmission efficiency, longer transmission distance.
Note
The power switch on the board is standby switch, and the machine is in standby state with low power consumption after the switch is turned off. To completely turn off the power or to remove the DC plug on the machine for a long time, it is ok.
Question and Answers
1. How to choose the power source
The board’s power supply is crucia1.The higher the voltage, the greater the current, the more power output, if you only have 12V/1A, this can carry 3-4 inch speakers.If you are above 19V/5A, 8-10 inches is fine.Power supply must be highly valued.If the voltage is too low, the sound will easily cause distortion after amplification. If the current is too low to carry the speaker, the voltage will be pulled down, and the work will be abnormal or the sound quality will be poor.
It is recommended to use 18V19V24V power supply with current above 5A.If you only have 9V12V or 1A 2A power supply, you can also use it with low power. Be careful when using it at the maximum volume, it may cause distortion and affect the sound quality.
2. How to choose the speaker
Common speakers are usually 8 ohms, can not distinguish between positive and negative polarity, the effect is the same, 4 ohms can also be used.If your horn power is small, it may be between 10W and 30W can also be used. The power supply voltage is small to prevent the speaker from burning down after playing loudly. For example, choose the power supply below 15V.If you are a 50w-300w speaker, don’t worry about the speaker burning problem, you can choose a 12-24v power supply, the higher the selected voltage, then the greater the output sound or power.
3. How to choose bluetooth or AUX audio input mode
Power up the power amplifier board, connect to the speaker, rotate the audio knob and the blue indicator light turns on, turn on the phone Settings — bluetooth — search to ‘bt-wuzhi’, and then click connect, after connecting successfully, there will be ding dong prompt sound, at this time for bluetooth mode, play music can, next time on the power will automatically connect back with the phone.
If you want to use AUX audio input, then disconnect the bluetooth connection, there will be an audio prompt, insert the audio cable to play music.IN AUX (LINE IN) mode, the connection bluetooth automatically converts to bluetooth mode.
4. It’s ok if the sound is small, but when the sound becomes larger, the sound will be turbid.
The sound has been distorted. Please replace the adapter with a higher voltage level.
5. It’s ok if the voice is small, but when the voice becomes louder, the sound will slow down.
The power of the input power is insufficient, and the power supply itself is intermittent power failure protection, please replace the power supply with higher power;Or if the power is too large, the power amplifier plate generates serious heat, and the situation of thermal protection occurs. Reduce the power to use or check whether the heat sink fits well to strengthen the heat dissipation.
Package Included
1 x 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier
Weight | 0.132 kg |
---|
Customers Also Viewed
BESTEP C25 12V Normally Open Trigger Delay Relay Timer Module Vibration for Home Smart
$8.73Relay ModuleAdd to cartManual:http://myosuploads3.hobbyant.com/products/20190219/20190219034014C255V9V12V.pdfApplicationsThis module is a switch instant turn-on trigger delay module, which can be applied to home intelligent systems, anti-theft alarm delay, door control system, automation equipment control, PLC industrial control, electronic development and so on.Description1. Using advanced high-quality timing chip control, accurate timing, performance is much better than 555 chip;2. The trigger terminal has optocoupler …
BESTEP C25 12V Normally Open Trigger Delay Relay Timer Module Vibration for Home SmartRead More
2.5W Mini Laser Engraving Machine 2-axis Engraving Machine for Wood Plastic Paper Bamboo Horns Leather Sponge Paper
$503.82Laser Engraving MachineAdd to cartProduct instruction and installation please:https://drive.google.com/openid=1MH931sFiPqf-L45WqXmfEAN4TrrFrlu-SpecificationsName:2-axis Engraving MachineModel:969407Size:600*550*150mm/24*22*6inStroke:380*260mm/15*10inCommunication Interface:miniUSBLaser Power:2500mwStepper Motor:42H34SVoltage:AC110-220V to DC12VControl Board Selection:DVP SE 2-axis engraving machine control boardSoftware Support:wifidevelo, Candle, Benbox, GrblController, LiteFire, etc. All GRBL-enabled softwareFeatures-The new custom V-slot aluminum matching rolling bearing X24, the accuracy is better and more stable.-There is no limit to the size and height of the engraving …
10pcs 0.28 inch 3-wire 0-100V Digital Red Display DC Voltmeter Adjustable Voltage Meter
$20.60Test & Measuring ModuleAdd to cartFeature1. The wiring of this voltmeter is simple. The conventional two wires are used, the red is connected to the positive, the black is connected to the negative, and the reverse connection is protected.2. Conventionally, no external working power supply is required, and the measuring voltage can be directly operated. The measuring voltage range is …
10pcs 0.28 inch 3-wire 0-100V Digital Red Display DC Voltmeter Adjustable Voltage MeterRead More
6W 6V 260x140x2.5mm S0506 Portable Semi-flexible Solar Panel with Back Junction Box Single USB Charger + 4xSucker + 2x Carabiner Kit
$32.26Smart Robot & Solar PanelAdd to cartFeatures– Portable and frame design– Standard USB output– thin design make it very easy to carry.– Monocrystalline silicon solar cells and epoxy resin surface seal.– Comes with four suckersSpecifications– Size:Approx. 26x14x0.3cm/ 10.24×5.51×0.12inch-Actual Power:6W– Solar output:6V 1700mA– Voltage regulator tube output:5V 1200mA– USB regulated output:5V 1200mAh– Output:USB 5V ,1200mAh– Charge time:3-5h– Solar open circuit voltage:6.8V (max)– …
DC 7V-24V Audio input Switch Board 4-way Audio Source Switch Board Audio Signal input Switch Board Switch Relay DIY Kit
$18.83DIY Electronic KitsAdd to cartSpecificationName:Audio signal switcherVoltage:DC 7V-24V, AC 6V-18VFunction:Four groups of audio signals are connected at the same time, and one group of signals is outputMethod:Rotary switching, switching once when rotating.Relay switching, zero loss.Application:computer, TV, mobile phone, home theater.Package included1set of Audio signal switcher
22.5V 1.25A 33W AC Power Adapter Charger for iRobot
$66.81AC/DC AdaptersAdd to cartSpecificationsName:AC Power Adapter ChargerInput:AC 100-240V 1.5A 50/60HzOutput:DC 22.5V 1.25A 33WInterface:5.5mm*2.5mmSafe:CE,RohsColor:BlackMaterial:PCSize ①Length:11.3cm ②Width:4.5cm ③Height:3.1cm ④Total Length:120cm (including wire)Fit for iRobot 400 500 600 700 770Features1.With heat dissipation intelligent chip and environmentally friendly material.2.Avoid power leakage and fire prevention.3.Strong and durable,long serve life.4.The tool is simple & easy to use.5.Small and beautifully designed and strong practicability.6.High performance …
22.5V 1.25A 33W AC Power Adapter Charger for iRobotRead More
Desktop Game Fun Game Penguin Ice Breaking Save the Penguin Great Family Education Toys
$28.42MathematicsAdd to cartFeatureThe One Who Make The Penguin Fall OffThe Will Lose This GameDon’t Fall Into The Trap Of The Opponent!See Who Can Get The Final Victory!SpecificationColor:As pictureSize:About 23*23*6CMMaterial:Environmentally Materials,ABS PlasticPackage Include1Set x Penguin Ice BreakingPlease NoteThe Picture is only for reference, please make the object as the standard.
Reviews
There are no reviews yet.