1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
This is 1002 HIFI ,If you need other parameters, please click ID to buy.
502C HIFI ID:1582750
502L MINI ID:1652630
1002L MINI ID:1652631
Specifications
Features
– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.
– TPA3116D2 is a type D amplifier IC launched by TI company, which has very high index parameters.The maximum modulation frequency is 1.2MHZ, and the high power output distortion is less than 0.1%.
– The red and gray ring inductors are specially designed for digital power amplifiers, featuring low loss, high bandwidth and high fidelity.
– The 684 film capacitor is a special capacitor for audio amplifier, which has the characteristics of low loss, high bandwidth and high fidelity.
– With AUX and bluetooth two audio source input mode, two in one.
– Potentiometer adjust volume, easy to control volume, very suitable for DIY speakers.
– Copper DC female head, fence terminal, withstand large current, no heat, no damage to the line, good wiring, not easy to short circuit.
– 5.0 bluetooth version, higher transmission efficiency, longer transmission distance.
Note
The power switch on the board is standby switch, and the machine is in standby state with low power consumption after the switch is turned off. To completely turn off the power or to remove the DC plug on the machine for a long time, it is ok.
Question and Answers
1. How to choose the power source
The board’s power supply is crucia1.The higher the voltage, the greater the current, the more power output, if you only have 12V/1A, this can carry 3-4 inch speakers.If you are above 19V/5A, 8-10 inches is fine.Power supply must be highly valued.If the voltage is too low, the sound will easily cause distortion after amplification. If the current is too low to carry the speaker, the voltage will be pulled down, and the work will be abnormal or the sound quality will be poor.
It is recommended to use 18V19V24V power supply with current above 5A.If you only have 9V12V or 1A 2A power supply, you can also use it with low power. Be careful when using it at the maximum volume, it may cause distortion and affect the sound quality.
2. How to choose the speaker
Common speakers are usually 8 ohms, can not distinguish between positive and negative polarity, the effect is the same, 4 ohms can also be used.If your horn power is small, it may be between 10W and 30W can also be used. The power supply voltage is small to prevent the speaker from burning down after playing loudly. For example, choose the power supply below 15V.If you are a 50w-300w speaker, don’t worry about the speaker burning problem, you can choose a 12-24v power supply, the higher the selected voltage, then the greater the output sound or power.
3. How to choose bluetooth or AUX audio input mode
Power up the power amplifier board, connect to the speaker, rotate the audio knob and the blue indicator light turns on, turn on the phone Settings — bluetooth — search to ‘bt-wuzhi’, and then click connect, after connecting successfully, there will be ding dong prompt sound, at this time for bluetooth mode, play music can, next time on the power will automatically connect back with the phone.
If you want to use AUX audio input, then disconnect the bluetooth connection, there will be an audio prompt, insert the audio cable to play music.IN AUX (LINE IN) mode, the connection bluetooth automatically converts to bluetooth mode.
4. It’s ok if the sound is small, but when the sound becomes larger, the sound will be turbid.
The sound has been distorted. Please replace the adapter with a higher voltage level.
5. It’s ok if the voice is small, but when the voice becomes louder, the sound will slow down.
The power of the input power is insufficient, and the power supply itself is intermittent power failure protection, please replace the power supply with higher power;Or if the power is too large, the power amplifier plate generates serious heat, and the situation of thermal protection occurs. Reduce the power to use or check whether the heat sink fits well to strengthen the heat dissipation.
Package Included
1 x 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier
Weight | 0.132 kg |
---|
Customers Also Viewed
50A Maxi Car Fuse with Weatherproof Holder 8AWG (8B&S) Wire Dual Battery for Car
$18.35Module ComponentsAdd to cartSpecificationColor:Black + RedSpecs:50AWire Length:15 cm(8AWG)Features50 AMP Fuse is included.This product will withstand tough jobs.It is waterproof and very heavy duty in construction.This fuse kit is perfectly suited for projects involving:4WD, 4X4, Caravan, Dual Battery, Batteries, AC DC, 12-32 Volt.Package Included1 x Maxi Blade Fuse Holder (15cm 8AWG Wire Each Side)1 x 50 Amp Fuse
HX-2S-A10 2S 8.4V-9V 8A Li-ion 18650 Lithium Battery Charger Protection Board 8.4V Overcurrent Overcharge Overdischarge Protection
$4.36Battery Protection ModuleAdd to cartSpecificationsModel:HX- 2S-A10 Maximum working current:8AMaximum instantaneous current:16AStatic current:less than 10uA Resistance:less than 300 m Ω Charging voltage:7 V – 9VOvercharging range:4.25-4.35V plus or minus 0.05VOver voltage range:2.5-3.0V plus or minus 0.05 VWorking temperature:- 40 – + 50 →Storage conditions:- 40 – + 80 →Size:41 * 8 * 2.2 mm Short circuit protection:to protect and restore …
DL14S 14S 48V BMS Battery Protection Board 15A 20A 30A 40A 50A 60A Waterproof BMS for Rechargeable Lifepo4 Electric Charge Li Lipo NiCoMn ion Cells with Balance
$37.17Battery Protection ModuleAdd to cartCurrent 15A Type Common Port / Current 20A Type Common Port / Current 30A Type Common Port / Current 40A Type Common Port / Current 50A Type Common Port / Current 60A Type Common Port / Current 15A Type Separate Port / Current 20A Type Separate Port / Current 30A T
16V16.6F Automotive Rectifier Low Temperature Starter Super Farad Capacitor Module 2.7100F
$50.18Electronic Accessories & SuppliesAdd to cartFeaturesFast charge and discharge. Long life. Large capacity. High power density. Good low temperature characteristicsSpecificationBrand:GDCPHModel:16V16.6FSeries:Super capacitor (16V)Nominal capacity:16.6FTolerance:10 %Rated voltage:15-16 VOperating temperature range:- 40→~70→Lead spacing:120mmDimensions:120*62*20mm(Length *Height *Thickness)Height-installation (maximum):62mmInstallation type:weldingCase:Aluminum capacitorApplication scope:self-provided power supply, standby power supply, alternative power supply, mobile power supplyPackage included1 x 16V16.6F Super Farad Capacitor
HC-SR505 Mini infrared PIR Motion Sensor Precise infrared Detector Module
$6.55Sensor & Detector ModuleAdd to cartHC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector ModuleIntroductionHC-SR505 small body sensing module is based on infrared technology, automatic control products, high sensitivity, high reliability, ultra-small, ultra-low-voltage operation mode. Widely used in various auto-sensing of electrical equipment, especially battery-powered automatic control products.SpecificationSize:40 x 10 x 13mmNet weight:2gTechnical parameters1. Operating Voltage Range:DC4.5-20V2. Static current3. Output …
HC-SR505 Mini infrared PIR Motion Sensor Precise infrared Detector ModuleRead More
4 Blade Eco Friendly Heat Powered Wood Log Burner Fireplace Stove Fan Silent
$97.19Temperature ControllersAdd to cartFeatures– More efficient wood use – Use up to 28% less wood – Heat powered stove fan – increases the efficiency of your freestanding stove oven or wood / log burner to generate warmth economically– Eco-friendly and self-powered – a thermoelectric module acts as a small generator to power the fan’s motor– Operates automatically between …
4 Blade Eco Friendly Heat Powered Wood Log Burner Fireplace Stove Fan SilentRead More
15W Solar Charger Solar Power Panel Waterproof Folding Solar Panel Bag Solar Panel Charger
$66.81Solar PanelAdd to cartPackage Included1x 15W solar panel chargerSpecificationColor:BlackMaterial:Mono-crystalline Silicon+PET+ fabricExtended size:65*17*0.3cmFolded size:18.5* 11.5*2cmPower(MAX):15WMaximum Power Voltage (Vmp):5VMaximum Power Current (Imp):2ANumber of Cells:36pcsOutput:USB5VPackage:Neutral packagingCharging temperature:-20~70℃Waterproof:IP65Conversion rate:20%Application:security camera, laptops, car batteries, cars, coaches, ships, airplanes, satellites, space stations, outdoor farming, planting, tourism, solar street lights etcFeature– Durable and waterproof.– Light weight and thin shape can be stored more easier and …
15W Solar Charger Solar Power Panel Waterproof Folding Solar Panel Bag Solar Panel ChargerRead More
3pcs RX24 50W 100R 100RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$9.36Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
Reviews
There are no reviews yet.