STC89C52 DIY Learning Board Kit Suit the Parts 51/AVR Microcontroller Development Board Learning Board
$13.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
This board to 51 interface designed for platform double reset circuit, the monolithic support are
1, On STC series such as STC89, STC11, STC12, STC90 DIP encapsulation (40 feet). Need to download a program via a serial port (COM).
2, The AT89S series such as AT89S51 and AT89S52 devices such as DIP encapsulation (40 feet). Need to write programs in ISP downloader to burn.
3, AVR microcontroller 40 pdip package there are two interfaces, one can use directly, such as ATMEGA8515, ATMEGA162 another such as ATMEGA16/32 need through the adapter plate is used. Other not DIP package also can be used through the adapter plate. Need to write programs in ISP downloader to burn.
PCB bare board test after the test, to insure the normal physical connection of the PCB.
51 / AVR microcontroller experiment board L2A empty board + bulk, suit, with a standard double panel material PCB design, welding plate welding designed for like DIY friends easily.
The following is a function of each part’s brief introduction
1, 6 keys on the keyboard:as the man-machine dialogue input devices, below the keyboard design, more convenient for us to use buttons. Two of the button can be also used interrupt the experiment.
2, the four digital tube, digital tube, a total of anode adopts a transistor constant current drive. To study the static and dynamic sweep trace of digital tube display.
3, eight LED lights:do entertaining diversions, lamp and other light experiment, water also is a kind of equipment as a status display.
4, the electrical appliances:relay output normally open normally closed contacts and isolation circuit board, can achieve higher voltage control devices, such as 220 v electric light, but it is in high voltage, users can do is not recommended for safety is more than the safety voltage 50 v.
5, the red outside receive IC interface:can use H1838 receive head of infrared receiving experiment, such as extensible infrared remote control keyboard.
6, the temperature sensor DS18B20 interface:learning ‘1-wire bus, 1 – Wire communication, can be used as a thermometer, the temperature alarm device.
7, buzzer:can do accompaniment music experiment, voice alarm, etc.
8, a serial port handling MAX232:this as synchronous asynchronous serial communication level conversion, can do synchronous asynchronous serial communication experiment, on STC microcontroller through the serial port burning process.
9, ISP interface:the interface is the AT/download program interface AVR single chip machine, can match the corresponding USB – ISP downloader.
10, LCD interface 16 feet:16 feet compatible LCD interface, can be upright character 1602, lattice pattern 12232, etc.
11, LCD interface 20 feet:20 feet compatible LCD interface, can be straight lattice pattern 12864 etc.
12, P extension:the board MCU P mouth has extended pin derivation, convenient extension. On the left is P1, RST and P3 leads to a total of 17 needle. The right P0, PEA, ALE, PSEN, P2, a total of 19 needle derivation, the interface design is based on 51 principle, when used on STC or AVR microcontroller, PEA, ALE, compared to other IO mouth PSEN.
13, power supply part:adopt two ways, one is the USB port power supply, one is the external power supply terminals, choose one is ok. Has a single circuit protection, but does not work.
Three groups after the switch of the power extension interface, can be extended to other device for electricity.
Package included
1 x DIY Learning Board Kit
Weight | 0.068 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.