Mini Jewelry Gas Mirco Torch Welding Brazing Cutting Tools
$109.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Material:Metal
Color:Multicolors
The highest welding temperature:1700℃
Interchangeable Torch Tip Length:43mm /1.69inch(appr.)
Length:205cm /80.71inch(appr.)
Features
Ideal for jewelry repair and construction, hobbyists, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing. It can weld an unlimited range of materials.
Torch
The torch is designed to meet the requirements of industry for a small, lightweigh torch to weld, braze, heat and solder materials ranging from 3/16 Inch metal to ultra-fine wires. The six tips available provide a wide range of flame sizes allowing the versatility to perform many different tasks. Light weight construction and highly flexible hose provide pinpoint welding with maximum control.
Gases
The product can be used with most comonly available pressurized fuel gases:acetylene, hy-drogen, propanes, propylenes, natural gas or mapp with oxygen. The two smallest tips, sizes 1 and 2, can only be used satisfactorily with acetylene and hy-drogen fuel gases. CAUTION:When using natural gas, a minimum of 1 pound of pressure is required. Higher pressures are necessary for use with melting tips.
Tips
There are six tips available for the torch. SIZE 1, 2 AND 3 ARE FITTED WITHA SYNTHETIC SAPPHIRE to assure accurate gas flow because of the extraordinary small orifice size. There are also two different heating tips available, one for use with all gases and another specially designed for propane or natural gas. Refer to the pressure recommendation chart provided in this booklet for being used.
Repairs/Replacement of Hose
The torch hose is a special material designed to be compatible with the various fuel gases. The maximum length of hose used should not exceed 12 feet.
※EYE PROTECTION
Oxy-fuel flames produce hazardous rays of light(infrared/ultraviolet). An approved filter lens is required for eye protection when operation oxy-fuel equipment. Approved safety glasses are required in conjuncting with a filtered eye protection device.
※PROPER CLOTHING
Hazardous rays of light, molten metal, or sparks can cause severe burns to unprotected parts of the body. Appropriate protective clothing such as gloves, aprons, safety shoes, etc, are required when using oxy-fuel equipment.
WARNING:Keep all clothing and protective equipment free of oil and grease. These substances can ignite and will burn violently in the presence of pure of oxygen.
HOUSEKEEPING AND FIRE PROTECTION
The safety of any work area can be improved by following good housekeeping practices.
1. The work place must have a fireproof floor.
2. Work benches must have fireproof tops.
3. Nearby walls and unprotected flooring should be protected from sparks and hot metal by the use of heat resistant shields or other approved material.
4. An approved fire extinguisher must be kept and maintained (check regularly) in the work area.
5. The work site should be cleared of combustible materials. If such materials cannot be removed, they must be protected with fireproof covers and a fire watch should be established.
Package Included
1 x Mini Gas Torch
5 x Interchangeable Torch Tip
1 x English User Manual
Weight | 0.319 kg |
---|
Customers Also Viewed
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 Mesh
$13.35Mesh & Wire ClothAdd to cartDescriptionStainless Steel 304 Woven Wire Cloth Screen is widely used in acid and alkali environment screening andfiltration, barbecue nets, handicraft nets, food machinery nets, cooking nets.SpecificationMaterial:Stainless steelSize:15x15cm(6inchx6inch)Mesh:60ApplicationWidely used in acid and alkali environment screening and filtration, barbecue nets, handicraft nets, foodmachinery nets, cooking nets, can also be used for solid material classification filtering, liquid and …
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 MeshRead More
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier Board
$47.10Amplifier BoardAdd to cartDetails1. The Bluetooth core uses QCC3003 chip, supports A2DP, AVRCP, HFP, AAC, I2S, etc., and uses 16M SPI FLASH memory chip. DAC adopts imported PCM51022. The electrolytic capacitor adopts the gold word SANYO 470UF/16V electrolytic capacitor to ensure strong and continuous power support.3. High-precision chip resistors are selected for the resistors to ensure a good …
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier BoardRead More
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM IC
$23.68Electronic Accessories & SuppliesAdd to cart10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROMFeatureSuitable for microprocessor systems requiring large data or program storage.It is organised as 2 M Words of 16 bit. The pin-out is compatible with a 32 Mbit Mask ROM.The FDIP42W has a transparent lid which allows the user to expose the chip to ultraviolet light to erase the …
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM ICRead More
120pcs 2.8 4.8 6.3 insert Plug Spring Sheathed Wire Terminal Connector Cold Pressed Terminal 0.5-2.5mm2 Connector
$7.32Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionName:2.8mm Spring ConnectorsMode:DJ622-2.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:4.8mm Spring ConnectorsMode:DJ622-4.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:6.3mm Spring ConnectorsMode:DJ622-6.3Applied Wire Diameter:1.0-1.5mm2Material:Brass tinned(Sheath:flame …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2A
$18.21Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:low levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2ARead More
Geekcreit ESP32 WiFi+bluetooth Development Board Ultra-Low Power Consumption Dual Cores Pins Unsoldered
$15.30Smart ModuleAdd to cartDescriptionESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module.The entire solution takes up the least amount of printed circuit board area.This board is used with 2.4 GHz dual-mode Wi-Fi and bluetooth chips by TSMC 40nm low power technology,power and RF properties best, which is safe, reliable, and …
RF Envelope Detector Amplitude Detection Discharge Signal Detection Module
$19.67RF amplifierAdd to cartDescriptionThis product uses a voltage doubler detector (consisting of two reverse microwave diodes), 1 time sensitive than single-tube detector(about 6dB),high sensitivity (typical -30dBm, or even to -40dBm) not ordinary 2AP9,1N60 can emulate.The envelope detection principleFeature1. Maximum input:20dBm2. Detection output:The default is positive3. Working Frequency:0.1-3200MHz4. RC Filter:R = 10K, C = 1nF; (two elements in parallel …
RF Envelope Detector Amplitude Detection Discharge Signal Detection ModuleRead More
ZPHS01 All-in-one Gas Detection Module Carbon Dioxide Dust PM2.5 Sensor PM2.5 + CO2 + VOC + Temperature + Humidity Detector
$129.99Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.NoteThis is PM2.5 + CO2 + VOC + Temperature + Humidity PM2.5 + CO2 + CH2O + Temperature + Humidity ID:1680902OverviewThis is an all-in-one module integrating VOC sensor, laser dust sensor, infrared …
Reviews
There are no reviews yet.