Mini Jewelry Gas Mirco Torch Welding Brazing Cutting Tools
$109.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Material:Metal
Color:Multicolors
The highest welding temperature:1700℃
Interchangeable Torch Tip Length:43mm /1.69inch(appr.)
Length:205cm /80.71inch(appr.)
Features
Ideal for jewelry repair and construction, hobbyists, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing. It can weld an unlimited range of materials.
Torch
The torch is designed to meet the requirements of industry for a small, lightweigh torch to weld, braze, heat and solder materials ranging from 3/16 Inch metal to ultra-fine wires. The six tips available provide a wide range of flame sizes allowing the versatility to perform many different tasks. Light weight construction and highly flexible hose provide pinpoint welding with maximum control.
Gases
The product can be used with most comonly available pressurized fuel gases:acetylene, hy-drogen, propanes, propylenes, natural gas or mapp with oxygen. The two smallest tips, sizes 1 and 2, can only be used satisfactorily with acetylene and hy-drogen fuel gases. CAUTION:When using natural gas, a minimum of 1 pound of pressure is required. Higher pressures are necessary for use with melting tips.
Tips
There are six tips available for the torch. SIZE 1, 2 AND 3 ARE FITTED WITHA SYNTHETIC SAPPHIRE to assure accurate gas flow because of the extraordinary small orifice size. There are also two different heating tips available, one for use with all gases and another specially designed for propane or natural gas. Refer to the pressure recommendation chart provided in this booklet for being used.
Repairs/Replacement of Hose
The torch hose is a special material designed to be compatible with the various fuel gases. The maximum length of hose used should not exceed 12 feet.
※EYE PROTECTION
Oxy-fuel flames produce hazardous rays of light(infrared/ultraviolet). An approved filter lens is required for eye protection when operation oxy-fuel equipment. Approved safety glasses are required in conjuncting with a filtered eye protection device.
※PROPER CLOTHING
Hazardous rays of light, molten metal, or sparks can cause severe burns to unprotected parts of the body. Appropriate protective clothing such as gloves, aprons, safety shoes, etc, are required when using oxy-fuel equipment.
WARNING:Keep all clothing and protective equipment free of oil and grease. These substances can ignite and will burn violently in the presence of pure of oxygen.
HOUSEKEEPING AND FIRE PROTECTION
The safety of any work area can be improved by following good housekeeping practices.
1. The work place must have a fireproof floor.
2. Work benches must have fireproof tops.
3. Nearby walls and unprotected flooring should be protected from sparks and hot metal by the use of heat resistant shields or other approved material.
4. An approved fire extinguisher must be kept and maintained (check regularly) in the work area.
5. The work site should be cleared of combustible materials. If such materials cannot be removed, they must be protected with fireproof covers and a fire watch should be established.
Package Included
1 x Mini Gas Torch
5 x Interchangeable Torch Tip
1 x English User Manual
Weight | 0.319 kg |
---|
Customers Also Viewed
K202 Low Power Consumption Fingerprint Control Board Switch Fingerprint Access Control Board DC12V
$17.48Other Module BoardAdd to cart>>>Manual:Click here to openSpecifications·P1:Power supply:DC12V·Output:Relay(Max. current:10A)·Standby current:15uA·Fingerprint capacity:120 pieces·Size:64.4*25.4mm·P2:MX 1.0mm space 6 Pin Fingerprint Module(can connect R502,R502-A,R502-AW,R503)·P3:MX 1.25mm space 6 Pin Fingerprint Module(can connect R300,R301T,R303,R303T,R305,R306,R307,R501)K202 is designed for low power consumption, the power supply is DC12V, the relay time can be adjusted by rotating the button, relay time:0.5-13 seconds.It is very easy to register fingerprint, …
intelligent Voice Recognition Module AC108 Audio Decoding Module 4 Microphones Decoder for Smart Speaker DIY
$28.42Expansion Board & ShieldAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Feature1. Based on RASPBERRY PI 40PIN interface, suitable for RASPBERRY PI series motherboards;2. Support RASPBERRY PI ZERO / ZERO W / 2B / 3B / 3B + / 4 and other development …
GP2Y1010AU0F Dust Sensor Module Dust Particle Concentration PM2.5 Haze Detection
$32.79Sensor & Detector ModuleAdd to cartFeaturesEasy to use:only one AD acquisition pin and one control pin are neededAnalog output:The output voltage is linearly related to the dust concentration in the effective range, with a built-in attenuation circuit, the output voltage does not exceed 1.5VSensitivity:0.5V/(100┢g/m3)Effective range:500┢g/m3Wide power supply range:built-in booster circuit, working voltage range 2.5V to 5.5VLow power consumption:within a sampling …
GP2Y1010AU0F Dust Sensor Module Dust Particle Concentration PM2.5 Haze DetectionRead More
3pcs TM1637 4 Bits Digital LED Display Module 7 Segment 0.36 inch RED Anode Tube 4 Serial Driver Board for
$11.00Display ScreenAdd to cartIntroductionThe module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.FeaturesDigital Tube:4-digit common anode with a 0.36-inch digital tube with a score point, highlighted …
1080P HDMI Male to 3RCA Audio Video AV Output Transmit Cable Adapter 1.5M/5Feet
$7.86Expansion Board & ShieldAdd to cartFeatures– Gold plated connectors for better signal transfer.– New generic HDMI Male to 3 RCA Audio Video AV Component.– HDMI to RCA cable is designed to connect and transfer signals from HDMI port to RCA port.– High quality HDMI- RCA cable suitable for use in HDTV, Home Theater systems, and all other HDMI to RCA …
1080P HDMI Male to 3RCA Audio Video AV Output Transmit Cable Adapter 1.5M/5FeetRead More
LED Strip Switching Power Supply AC110V-240V to DC12V 60W 5A 160*40*32mm S-60-12
$35.59Power Supply ModuleAdd to cartFeature1. International AC input range2. High efficiency, low working temperature3. Short circuit,overload,over-current protection4. 100% fully load burn-in test5. Built-in EMI filter, low ripple noise6. Low cost, high reliability7. CE and FCC approvalSpecification1. LED switching power supply using pulse width modulation (PWM) switching technology designed to ensure power supply stability and high efficiency. 2. Product interference, …
LED Strip Switching Power Supply AC110V-240V to DC12V 60W 5A 160*40*32mm S-60-12Read More
5pcs TB371 4 Key MCU Keyboard Button Board Compatible UNO MEGA2560 Pro Mini Nano Due for Raspberry Pi Teensy++ Geekcreit for Arduino – products that work with official for Arduino boards
$14.12Other Module BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Description1. 4-button Common Cathode key module(When pressed output low level). 2. GND K1 K2 K3 K4′ 4 PIN OUT 2.54mm3. Working voltage:DC 0-48V 4. Size:12.7 x 33mm5. It can be inserted directly …
TCRT5000 infrared Reflective Switch IR Barrier Line Track Sensor Module
$4.36Sensor & Detector ModuleAdd to cartTCRT5000 Infrared Reflective Switch IR Barrier Line Track Sensor ModuleFeaturesTCRT5000 sensor of infrared emission diode constantly launch infrared, the infrared ray is emitted when the intensity of reflected back has not been reflected or but is not big enough, the light activated triode has been in the off state, the output end of the module …
TCRT5000 infrared Reflective Switch IR Barrier Line Track Sensor ModuleRead More
Reviews
There are no reviews yet.