WQ-BX-L1 Water Filter Activated Carbon Cartridge Replacement Refrigerator Filter for LG LT700P
$28.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Flow rate:0.5 gpm(1.89L/min)
Material:PC+activated carbon
Min.working pressure:207 kPa/30 ps
Max.working pressure:689 kPa/100 psi
Min.operating temperature:0.6°C/33°F
Max.operating temperature:38°C/100°F
Rated capacity:300 gallons(1,136 litres)
Features
-Easy installation and operation.
-Replace the filter every 6 months.
-Helps reduce chlorine taste and odor.
-High quality – inexpensive alternative to factory original product.
-Helps reduce contaminants found in tap water and improves its quality.
-The refrigerator water filter have been tested and certified by NSF International against NSF/ANSI 42 for material,safe and reliable to use.
Installation
1.Press the button of filter over and open it slowly.
2.Pull down the cartridge and remove the old filter.
3.Take off the protective cover cap.
4.Insert the filter into manifold hole until it stops.
5.Rotate the filter up into position and close the filter cover.
6.Run water through the filter 5 minutes to clean the system.
7.Reset the water filter system.
Compatible with LG and Other Filter Model / Part Numbers
ADQ36006101, ADQ36006101-S, ADQ36006102 ,ADQ36006102-S, FLT700P, 048231783705
Compatible Kenmore Filter Model / Part Numbers
9690,46-9690
Package Included
1 X Filter Element
Weight | 0.162 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.