Catda PWM Mini Cooling Fan Hat Argon Speed Control GPIO Fans with Copper Metal Base Radiator for Raspberry Pi 4 Model B
$17.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The Argon mini cooling fan specially designed for Raspberry Pi 4, pure copper metal base radiator, pure copper material is the best heat dissipation material, it is the perfect combination of cooling fan and radiator. Improve the operating speed and service life of the motherboard CPU, so you don’t have to worry about the inconvenience caused by the motherboard overheating during use! In addition, the cooling fan also has a switch, you can decide whether to use the fan at will, you don’t need to manually plug and unplug the GPIO interface like a traditional fan. Even if the fan is turned off, the copper heat sink base can still perform heat dissipation for you. Please note:In PWN mode, the Raspberry Pi mini PWN cooling fan with adjustable speed will only rotate more than 55 degrees by default
How to installl Argon Mini Fan
Connect the Argon Mini Fan to your Raspberry Pi 4
Don’t power your Raspberry Pi yet
1. Place Silicon Thermal Pad on the CPU of the Raspberry Pi.2. Make sure that the header of the Argon Mini FAN HAT is aligned with physical PINS 1-12 of the Raspberry Pi.3. Check if the HEAT SINK of the Mini FAN is in contact with the Raspberry Pi CPU.
SET MODE OF THE ARGON MINI FAN
1. ON – Mini FAN will always turn ON when the Raspberry Pi is powered.2. OFF – Turns OFF the Mini FAN3. PWM – Sets the Mini FAN into a Pulse Width controllable mode.
SETTING THE PWM SETTINGS
1. In Raspbian, open the Terminal App2. Go To the root directory and Open the/boot/config.txt file3. Open and edit the ‘config.txt’ file by typing:sudo nano config.txt4. Add the line:.dtoverlay=gpio-fan,gpiopin=1 8,temp=550005. Save changes and exit by pressing Ctrl+X
This setting will start the Mini Fan at CPU Temp 55 degrees Celcius (temp= 55000). You may set your desired fan initiation temperature as you desire.
Package List
1 ≠ Argon Mini Fan( Not Include the Raspberry Pi ! )
Weight | 0.1 kg |
---|
Customers Also Viewed
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger for
$10.15Relay ModuleAdd to cartDescription Maximum load:AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Every channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the control line is broken, the relay will not act. Power indicator …
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger forRead More
5Pcs CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board A H Bridge
$50.91Other Module BoardAdd to cartDescriptionThe 33886 is a monolithic H-Bridge ideal for fractional horsepowerDC-motor and bi-directional thrust solenoid control. The IC incorporatesinternal control logic, charge pump, gate drive, and low RDS(ON) MOSFEToutput circuitry. The 33886 is able to control continuous inductive DC loadcurrents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed)at frequencies up to 10 …
20pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$4.36Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included20 x Resistor
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USB
$36.44Solar ControllersAdd to cartSpecificationsName:20A 12V/24V LCD Display PWM Solar Panel Charge ControllerModel:C11465Rated voltage:12/24V AUTOCharge current:20ADischarge current:10AMax.PV input power:260W(12V),520W(24V)Max solar input12V battery,the highest 23V24V battery when the highest 46VEqualization:14.2VFloat charge:13.7V (defaul,adjustable)Discharge stop:10.7V(defaul,adjustable)Discharge reconnect:12.6V(defaul,adjustable)Charge reconnect:13VVoltage of open light:Solar panel 8V(Light lights delay)Voltage of close light:Solar panel 8V(Light off delay)USB output:2 way USB output,5V/2A(Max.)Self-consumeOperationg temperature:-35-60℃Color:BlackSize:133.5mmx70mmx35mmFeatureBuild-in industrial micro controller.Big LCD display,all adjustable …
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USBRead More
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for Arduino
$39.35Expansion Board & ShieldAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openWhat do I mainly doArduino is a huge ecosystem. If the Pi interface can be converted to the Arduino standard, it can be connected to a variety of compatible Arduino expansion boards and connected to the Arduino ecosystem to obtain more available resources.I just do this.Basic situationCompatible with …
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for ArduinoRead More
Emakefun DC5V RGB Tricolor Lamp Module 5PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$10.61Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:5PIN anti-reverse connection Dupont line3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x RGB Tricolor Lamp Module (the other items are not includes)
Reviews
There are no reviews yet.