Catda PWM Mini Cooling Fan Hat Argon Speed Control GPIO Fans with Copper Metal Base Radiator for Raspberry Pi 4 Model B
$17.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The Argon mini cooling fan specially designed for Raspberry Pi 4, pure copper metal base radiator, pure copper material is the best heat dissipation material, it is the perfect combination of cooling fan and radiator. Improve the operating speed and service life of the motherboard CPU, so you don’t have to worry about the inconvenience caused by the motherboard overheating during use! In addition, the cooling fan also has a switch, you can decide whether to use the fan at will, you don’t need to manually plug and unplug the GPIO interface like a traditional fan. Even if the fan is turned off, the copper heat sink base can still perform heat dissipation for you. Please note:In PWN mode, the Raspberry Pi mini PWN cooling fan with adjustable speed will only rotate more than 55 degrees by default
How to installl Argon Mini Fan
Connect the Argon Mini Fan to your Raspberry Pi 4
Don’t power your Raspberry Pi yet
1. Place Silicon Thermal Pad on the CPU of the Raspberry Pi.2. Make sure that the header of the Argon Mini FAN HAT is aligned with physical PINS 1-12 of the Raspberry Pi.3. Check if the HEAT SINK of the Mini FAN is in contact with the Raspberry Pi CPU.
SET MODE OF THE ARGON MINI FAN
1. ON – Mini FAN will always turn ON when the Raspberry Pi is powered.2. OFF – Turns OFF the Mini FAN3. PWM – Sets the Mini FAN into a Pulse Width controllable mode.
SETTING THE PWM SETTINGS
1. In Raspbian, open the Terminal App2. Go To the root directory and Open the/boot/config.txt file3. Open and edit the ‘config.txt’ file by typing:sudo nano config.txt4. Add the line:.dtoverlay=gpio-fan,gpiopin=1 8,temp=550005. Save changes and exit by pressing Ctrl+X
This setting will start the Mini Fan at CPU Temp 55 degrees Celcius (temp= 55000). You may set your desired fan initiation temperature as you desire.
Package List
1 ≠ Argon Mini Fan( Not Include the Raspberry Pi ! )
Weight | 0.1 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.