Catda PWM Mini Cooling Fan Hat Argon Speed Control GPIO Fans with Copper Metal Base Radiator for Raspberry Pi 4 Model B
$17.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The Argon mini cooling fan specially designed for Raspberry Pi 4, pure copper metal base radiator, pure copper material is the best heat dissipation material, it is the perfect combination of cooling fan and radiator. Improve the operating speed and service life of the motherboard CPU, so you don’t have to worry about the inconvenience caused by the motherboard overheating during use! In addition, the cooling fan also has a switch, you can decide whether to use the fan at will, you don’t need to manually plug and unplug the GPIO interface like a traditional fan. Even if the fan is turned off, the copper heat sink base can still perform heat dissipation for you. Please note:In PWN mode, the Raspberry Pi mini PWN cooling fan with adjustable speed will only rotate more than 55 degrees by default
How to installl Argon Mini Fan
Connect the Argon Mini Fan to your Raspberry Pi 4
Don’t power your Raspberry Pi yet
1. Place Silicon Thermal Pad on the CPU of the Raspberry Pi.2. Make sure that the header of the Argon Mini FAN HAT is aligned with physical PINS 1-12 of the Raspberry Pi.3. Check if the HEAT SINK of the Mini FAN is in contact with the Raspberry Pi CPU.
SET MODE OF THE ARGON MINI FAN
1. ON – Mini FAN will always turn ON when the Raspberry Pi is powered.2. OFF – Turns OFF the Mini FAN3. PWM – Sets the Mini FAN into a Pulse Width controllable mode.
SETTING THE PWM SETTINGS
1. In Raspbian, open the Terminal App2. Go To the root directory and Open the/boot/config.txt file3. Open and edit the ‘config.txt’ file by typing:sudo nano config.txt4. Add the line:.dtoverlay=gpio-fan,gpiopin=1 8,temp=550005. Save changes and exit by pressing Ctrl+X
This setting will start the Mini Fan at CPU Temp 55 degrees Celcius (temp= 55000). You may set your desired fan initiation temperature as you desire.
Package List
1 ≠ Argon Mini Fan( Not Include the Raspberry Pi ! )
Weight | 0.1 kg |
---|
Customers Also Viewed
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch Module
$16.24Sensor & Detector ModuleAdd to cartDescriptionIt uses Doppler radar technology, with auto-sensing capabilities to control other product,High sensitivity, sensor distance, reliability, wide angle sensor,Wide supply voltage range and other characteristics. Widely used in lighting situations,anti-theft alarm situations.Features1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their …
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch ModuleRead More
24V Air Parking Heater Flame Sensor Igniters Flame Detecter 82306B for Webasto Air top 2000
$70.86Solar CollectorsAdd to cartSpecificationsBrand Name:AutoleaderMaterial:Silicon NitrideOEM:82306BItem weight:11gFeaturesThis product is mainly made of silicon nitride ceramic substrate, with tungsten filament as the heat source, tungsten wire embedded in silicon nitride matrix, via hot-press sintering process to form an organic whole, then through grinding, welding wire, thus made the ignition components.Fitmentfor Webasto Air Top 2000Package Included1x Parking Heater Senser
L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based on ESP12E
$9.79Expansion Board & ShieldAdd to cartL293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E For Specifications 1. Motor power (VM):4.5 ~ 36V 2. Control power (VIN):4.5V ~ 9V(10V MAX) 3. Provide the shortcut connector (short by VM and VIM), thus can use 4. May use common power source (4.5V~9V) by shorting VM …
220V 1000W Hot Plate Electric Iron Burner Heating Stove Heater Household Laboratory Heating Equipments
$52.64Laboratory Heating EquipmentsAdd to cartSpecificationsType:Electric Stove BurnerPlug Type:EUColor:WhiteVoltage:220VPower:1000WRegulating temperature:5 LevelsMaterial:Stainless Steel + IronSize:14*14*5CM (5.5*5.5*2in)Features– Adopted iron shell, thicken panel, material sturdy and durable to use– Portable single burner with 500 watts of power– Powered by electric, do not need fuel, eco-friendly– Easy-to-use temperature-setting knob for low, medium, or high heat– Provides quick and sustained heat; power indicator light– Single …
Reviews
There are no reviews yet.