Digital DC0-100V 20A Voltmeter Ammeter Red Green LED Dual Display for 12v 24v Car Voltage Current Monitor No Need External Shunt
$17.48
Color. Black /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Supply voltage (non-isolated meter):DC3.5 ~ 30V (wide range),
Note:The maximum input voltage can not exceed 30V, otherwise it will be burned
Isolation meter (isolated power supply meter):DC8-18V
Operating Current
Display:0.39 inchLED, voltage – red, Current – Green
Dimensions:70 * 40 * 30 mm
Installation hole:68 * 38 mm
Measurement rate:≥500mS / times
Accuracy:1% (± 1 word)
Extreme working conditions
Min. supply voltage:+ 3.5V
Max. supply voltage:+ 30V
Working temperature:-10 ~ + 65
Operating Humidity:10 ~ 80% (non-condensing)
Working pressure:80 ~ 106kPa
Sunlight:no direct exposure
Power meter:Two line socket
Thin – Black Line:Header supply Negative
Thin – Red line:Header supply positive
(Note:voltage between red and black lines can’t exceed 30V)
Test side:Three line socket
COM:Test Common
V +:Test positive voltage input
A +:Test inchpositiveinch current input; check the drawing before install or it will burn. Because the header by co-design, which means the earth wire of test and power supply is interlinked,so only can be connected to between the negative power supply and the negative of the tested device
(We recommend to link the yellow line and the black lines together, to prevent outside interference caused by digital ammeter flashing)
Package included
1 x Digital Voltmeter Ammeter
Weight | 0.065 kg |
---|
Customers Also Viewed
5pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$17.37Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …
MTOLASER 100mW 405nm Blue-violet Dot Laser Module Generator Variable Focus industrial Marking Position Alignment Diode Generator
$71.59Laser ModuleAdd to cartDescriptionThis variable focus 100mW 405nm Blue-violet dot laser module employs qualified 405nm red laser diode, generates the stable and reliable blue-violet laser dot applicable for various industrial alignments and positioning work. Compact size, easy to install, multi-angle adjustment of installation, easy to operate.SpecificationBrand:MTOLASERLaser Power:100mWWavelength:405nmBeam Shape:Dot Variable Focus:YESOutput Light:Visible LightWorking Voltage:DC 5VWorking Current:30-210mAOptics:Focus Lens Shell Material:Aviation …
DIY WiFi(APP Version) bluetooth Colorful Canton Tower LED Lighting Cube Music Spectrum Electronic Kit
$52.47DIY Electronic KitsAdd to cartDescription1. Offline animation increased to 20 species, 4 +1 spectrum modes, each animation has been carefully designed and debugged,the effect is very brilliant.2. The WiFi module and bluetooth module after careful PCB design and debugging, straight line transmission distance up to 10-20 meters.3. Phone bluetooth connection, available phone with the sound playback music. After using …
10pcs CJMCU-4599 Si4599 N and P Channel 40V (D -S) MOSFET Expansion Board Module
$24.37Expansion Board & ShieldAdd to cartFeaturesHalogen-freeTrenchFET power MOSFET100% UIS TestedApplicationsBackling inverter for LCD displayFull bridge converterPackage Included10 x CJMCU Expansion Board ModuleSize:8cm x 8cm x 5cm (3.15in x 3.15in x 1.97in)
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry Pi
$36.73Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesSupports any revision of Raspberry Pi (directly-pluggable)Onboard 4 ≠ 8 RGB LED (WS2812B)Control pin is configurable via jumpers (0┯ resistor)Break out control pins, easy for working with other MCUComes with development resources …
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry PiRead More
IR908-7C PT908-7C SideTransmitter and Receiver Paired Tube 1.5mm Transparent 940nm
$2.82Electronic Accessories & SuppliesAdd to cartFeaturesHigh sensitivitySmall junction capacitancePb freeDescriptionsPT908-7C is a phototransistor in miniature package which is molded in a water clear plastic with spherical top view lens.The device is spectrally matched to infrared emitting diode.ApplicationsOptoelectronic switchVCR ,Video CameraFloppy disk driveInfrared applied systemSpecificationModel:IR908-7C.PT908-7COutput form:NPN transistor typeChannel:single channelOutput wavelength:940 nmPackage included1 x IR908-7C phototransistor1 x PT908-7C phototransistor
20pcs ME2-CO-14×14 Carbon Monoxide Gas Sensor CO Sensor 0~1000 ppm for Civilian Area to Detect CO Concentration Carbon Monoxide Detector CO Alarms
$67.68Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openPrinciple IntroductionWinsen Electronics, produces Carbon monoxide sensor CO gas sensor, with low cost and fuel cell working principle.ME2-CO-14×14, fuel cell type sensor, detects gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current …
6inch/150mm Aluminum 12V DC Max Load 1000N Linear Actuator Electric Putter Motor
$111.36Switch AccessoriesAdd to cartFeatures* Wear-resistant, smooth appearance, high compressive strength.* Maximum thrust 6000N.* Easy to use.SpecificationMaterial:Aluminum + PlasticColor:SilverSize:28 x 8cmInput:12V DCStroke:6 inch/ 150mmMax load:1000NSpeed:12 /sPackage included1 x Electric putter2 x Bracket
Reviews
There are no reviews yet.