RIDEN LD25 Electronic Load Resistor USB interface Discharge Battery Test LED Display Fan
$24.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Rated operational voltage:DC4-25.0V:Max discharging power:25W
Rated operational current:0.25-4.00A (when fan don’t work, the min. constant current is 0.05A ):Fan Speed:Large size intelligent temperature control fan, speed 5800±10%RPM
Constant current resolution:±(1%+3 digits):Heat dispatch method:intelligent temperature
control fan + All aluminum fan
Working temperature:-10→-40→:Adjustable potentiometer:Preci sion multiloop adjustable potentiometer
Display mode:4 bit LED tube:Expansion port:Micro USB port, Type-C port
Product weight:56.51g:Product size:83.8×41.1×27.9mm
Product Structure
A. Micro USB port:MAX current 2A
B.USB male port (widened power wire, MAX current 4A)
C. Type-C port:MAX current 4A
D. All aluminum fan
E. Intelligent temperature control fan
F. 4 Bit LED tube
G. Preci sion multiloop adjustable potentiometer
H. “SET Inch button:press “SET Inch to switch display status, Press and hold the button to set the load output recovery mode after protection removed.
I. “ON/OFF Inch button:press the button to open or close output. Press and hold the button to set the boot default status of open or close
Function Introduction
a. Protection function
OVP (over-voltage protection):there is OVP at 25-30V; it will be damaged permanently over 30V.at OVP, LED show OVP, as picture 1 show)
OTP(over-temperature protection):load temperature is over 80→, the LED show OTP, as picture 2 show.
OPP(over-power protection):the power is over 80→, the LED show OPP, as picture 3 show.
b. Set output recovery mode after load entering protection status, manual or automatic
c. View the voltage value, current value and power value of the load.
d. Intelligent temperature control fan. When the current is over 2A or the temperature is over 40→, the fan will start.
e. Preci sion multiloop adjustable potentiometer:you can adjust the current precisely, upto 0.01A. so you don’t need to adjust a big current mistakenly to damage the power supply. So the power supply will not be damaged due to mistakenly adjustment
f. you can set default boot status freely, open or close.
Operation Instruction
The load is powered at the range of 4-25.0V (the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired), the LED will be flashing to remind current setting value, waiting for output. Press ON/OFF button, open output to start work.
1. Adjust output current value.
Turning the rotary control clockwise increases the value and anticlockwise decreases the value. According to the needs of the situation, the potentiometer can realize coarse adjustment or fine adjustment. The fine adjustment can be accurate to 0.01A.
2, Adjust LED display status
Press “SET Inch to adjust the LED display status, default display output current value. Press “SET Inch button to display *.**A, **.*P, **.*V followed by recycling.
3. Open or close load output
Press “ON/OFF Inch button, you can open or close load output
4, Set load default boot status (open or close status, Factory default close status)
Press and hold “ON/OFF Inch button to set load default boot status freely. Press and hold “ON/OFF Inch button, if the LED will display “–ON Inch, as picture 4, the load will open output when power on next time; If the LED display Inch-OFF Inch, as picture 5 show, the LED will display current value flashing at last shutdown when power on next time, then press “ON/OFF Inch button to open output.
5, Set the load output recovery mode after protection removed.
Press and hold “SET Inch button, to set output recovery mode after protection removed. Press and hold “SET Inch button, if the LED will display “–ON Inch, as picture 4, and the protection was removed, the load will recover to work; If the LED display Inch-OFF Inch, as picture 5 show, and the protection was removed, the LED still show protection status, then press “ON/OFF ‘button, the display will display present setting current flashing, then press “ON/OFF‘ button again, the load recover to work.
NOTE:Please check the output current of power bank carefully. The current of the power bank is small, so adjust smaller current when the load was used.
Application
Assist to measure Micro USB cable good or not
Assist to measure Type-C cable good or not
Assist to measure output current capacity of charger good or not
The usage of large batch ageing test at the charger factory
Information
LD25 user manual download page:http://www.mediafire.com/folder/q2o63jc8df6qc/LD25
NOTE
This product has no reverse connection protection, the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired.
Package included
1 x LD25 Electronic Load
Weight | 0.056 kg |
---|
Customers Also Viewed
Freezer -30~+30 Degree Celsius AC 250V 16A AC380V Temperature Capillary thermostat
$22.26Switch AccessoriesAdd to cartFreezer -30~+30 Degree Celsius AC 250V 16A AC380V Temperature Capillary ThermostatSpecificationProduct Name:Refrigerator ThermostatModel:TR(TW)711/NIITemperature Range:-30~+30°Voltage Rating:AC 250V 16A AC 380V 2AThis refrigerator thermostat ideal replace for your damaged thermostat.Probe Size:110 x 6.5mm / 4.3inch x 0.26inch (L*Max.D)Dial Diameter:43mm / 1.69inchTotal Size(Included Pin):63 x 51 x 48mm / 2.5inch x 2inch x 1.9inch(L*W*T)Material:Metal, PlasticColor:As ShownNet Weight:110gPackage1 x …
Freezer -30~+30 Degree Celsius AC 250V 16A AC380V Temperature Capillary thermostatRead More
UNO R3 ATmega16U2 AVR USB Development Board with Housing
$22.06Motherboard & Development BoardAdd to cartUNO R3 DescriptionThis UNO R3 board is 100% compatible with original one, now it has perfect quality and performance .This is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. It can be used to develop stand-alone interactive objects or can be connected to …
UNO R3 ATmega16U2 AVR USB Development Board with HousingRead More
5pcs 315MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver Board
$48.68Smart ModuleAdd to cartFeatureProduct Name:Wireless 3000m Transmitter ModuleProduct type ZAB-3000 (without coding)Dimensions:45mm*17mm*6.2mmWorking voltage:DC 9V ~12VWorking current:200~220mAOperating frequency:315MHzTransmit power:>10mwLaunch distance:2000-3000 metersRadiated power:1.5 WModulation method:ASKQuiescent current:0uARated parameter:Symbol:ValueDC supply voltage:VDD-VSS:5VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°C:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:VSS:Positive power supply3/4:GND:Negative power supply5:DATA:Data signal output, compatible with CMOS levelsPackage includes5 x Wireless 3000m …
5pcs 315MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver BoardRead More
40Pcs Round Laser Engraving Wooden Slices Sheet with 40 Iron Loop Set for Birthday Reminder DIY Hanging Wood Plaque Decorations
$9.02Engraving & Cutting MaterialsAdd to cartSpecificationMaterial:Wood Color:BurlywoodQuantity:40PcsFeatures1. Delicate detailed crafts and precise cutout.2. Great home wall decoration.3. You should never miss a birthday, anniversary or festival like Mothers’ Day, Fathers’ Day with this unique family board.4. Easy to joint the wooden discs together and easy to hang them on a plaque calender.5. Creative birthday and important day reminder.Great gift for …
2.4G NRF24L01 Wireless Module Patch 120M 1.9V-3.6V 3.3V 4dBm GFSK SPI
$3.60Smart ModuleAdd to cartMore document click to download:2.4G NRF24L01FeaturesThis module uses the domestic RF bonding chip BK2425, which integrates all the high-speed signal processing parts related to the RF protocol. Since the link layer is fully integrated on the module, it is very easy to develop. Automatic detection and automatic retransmission of lost data packets, retransmission time and …
2.4G NRF24L01 Wireless Module Patch 120M 1.9V-3.6V 3.3V 4dBm GFSK SPIRead More
OPT101 Illumination Sensor Light intensity Sensor Module Monolithic Photodiode
$6.55Sensor & Detector ModuleAdd to cartFeatureThe OPT101 is an illuminance photosensor that integrates a photodiode and a specially optimized op-amp. The transparent package allows the photodiode to have a larger sensing surface with higher sensitivity and a wide spectral response range (infrared to visible light 300nm-1000nm).ParameterWorking voltage:2.7 ~ 36VWorking temperature:0°C~70°CPhotodiode light irradiation area:5.2mm2Photocurrent:0.45A/W (λ = 650nm)Output voltage ratio:0.45V/uWAnalog voltage output …
OPT101 Illumination Sensor Light intensity Sensor Module Monolithic PhotodiodeRead More
Reviews
There are no reviews yet.