RIDEN LD25 Electronic Load Resistor USB interface Discharge Battery Test LED Display Fan
$24.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Rated operational voltage:DC4-25.0V:Max discharging power:25W
Rated operational current:0.25-4.00A (when fan don’t work, the min. constant current is 0.05A ):Fan Speed:Large size intelligent temperature control fan, speed 5800±10%RPM
Constant current resolution:±(1%+3 digits):Heat dispatch method:intelligent temperature
control fan + All aluminum fan
Working temperature:-10→-40→:Adjustable potentiometer:Preci sion multiloop adjustable potentiometer
Display mode:4 bit LED tube:Expansion port:Micro USB port, Type-C port
Product weight:56.51g:Product size:83.8×41.1×27.9mm
Product Structure
A. Micro USB port:MAX current 2A
B.USB male port (widened power wire, MAX current 4A)
C. Type-C port:MAX current 4A
D. All aluminum fan
E. Intelligent temperature control fan
F. 4 Bit LED tube
G. Preci sion multiloop adjustable potentiometer
H. “SET Inch button:press “SET Inch to switch display status, Press and hold the button to set the load output recovery mode after protection removed.
I. “ON/OFF Inch button:press the button to open or close output. Press and hold the button to set the boot default status of open or close
Function Introduction
a. Protection function
OVP (over-voltage protection):there is OVP at 25-30V; it will be damaged permanently over 30V.at OVP, LED show OVP, as picture 1 show)
OTP(over-temperature protection):load temperature is over 80→, the LED show OTP, as picture 2 show.
OPP(over-power protection):the power is over 80→, the LED show OPP, as picture 3 show.
b. Set output recovery mode after load entering protection status, manual or automatic
c. View the voltage value, current value and power value of the load.
d. Intelligent temperature control fan. When the current is over 2A or the temperature is over 40→, the fan will start.
e. Preci sion multiloop adjustable potentiometer:you can adjust the current precisely, upto 0.01A. so you don’t need to adjust a big current mistakenly to damage the power supply. So the power supply will not be damaged due to mistakenly adjustment
f. you can set default boot status freely, open or close.
Operation Instruction
The load is powered at the range of 4-25.0V (the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired), the LED will be flashing to remind current setting value, waiting for output. Press ON/OFF button, open output to start work.
1. Adjust output current value.
Turning the rotary control clockwise increases the value and anticlockwise decreases the value. According to the needs of the situation, the potentiometer can realize coarse adjustment or fine adjustment. The fine adjustment can be accurate to 0.01A.
2, Adjust LED display status
Press “SET Inch to adjust the LED display status, default display output current value. Press “SET Inch button to display *.**A, **.*P, **.*V followed by recycling.
3. Open or close load output
Press “ON/OFF Inch button, you can open or close load output
4, Set load default boot status (open or close status, Factory default close status)
Press and hold “ON/OFF Inch button to set load default boot status freely. Press and hold “ON/OFF Inch button, if the LED will display “–ON Inch, as picture 4, the load will open output when power on next time; If the LED display Inch-OFF Inch, as picture 5 show, the LED will display current value flashing at last shutdown when power on next time, then press “ON/OFF Inch button to open output.
5, Set the load output recovery mode after protection removed.
Press and hold “SET Inch button, to set output recovery mode after protection removed. Press and hold “SET Inch button, if the LED will display “–ON Inch, as picture 4, and the protection was removed, the load will recover to work; If the LED display Inch-OFF Inch, as picture 5 show, and the protection was removed, the LED still show protection status, then press “ON/OFF ‘button, the display will display present setting current flashing, then press “ON/OFF‘ button again, the load recover to work.
NOTE:Please check the output current of power bank carefully. The current of the power bank is small, so adjust smaller current when the load was used.
Application
Assist to measure Micro USB cable good or not
Assist to measure Type-C cable good or not
Assist to measure output current capacity of charger good or not
The usage of large batch ageing test at the charger factory
Information
LD25 user manual download page:http://www.mediafire.com/folder/q2o63jc8df6qc/LD25
NOTE
This product has no reverse connection protection, the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired.
Package included
1 x LD25 Electronic Load
Weight | 0.056 kg |
---|
Customers Also Viewed
DC 2-12V to 12V 9V 9W USB Boost Power Supply Module Step Up Module DC Converter
$4.36Boost & Buck ModuleAdd to cartSpecificationsStarting voltage:2VInput voltage:2V-12V DCOutput voltage:12V DC (9V DC)Input current:2AOutput voltage:default 12V, 9V can be setOutput power:≤8w (in the case of input 5V, it is easy to overheat)No-load currentWorking temperature:-40 to -80 ° CBoard size:25*14*5mm (length * width * height does not include USB)The General Test Data (just for reference)Input DC2V boost to 12V output current …
DC 2-12V to 12V 9V 9W USB Boost Power Supply Module Step Up Module DC ConverterRead More
5Pcs DC24V Coil Power Relay LY2NJ JQX-13F DPDT 8 Pin PTF08A with Socket Base
$26.55Electronic Accessories & SuppliesAdd to cartSpecificationsModel:LY2NJ (8 pins)Coil voltage:DC24VCoil Power:DC (W):≤0.9AC (VA):≤1.2Contact Structure:8 pins 2 normally open 2 normally closedContact capacity:10A 250VACPull-in voltage:≤80% (V)Release voltage:DC:≥10% (V), AC:≥30%Contact resistance:≤50 (mΩ)Insulation resistance:≤100 (mΩ)Dimensions:27.5 * 21 * 35.3mmTerminals form:SocketAction time:20ms or lessReset Time:20ms or lessOperating frequencyMechanical 18,000 cycles / hourElectrical 18,000 times / hourPackage included5 x DC24V Coil Power Relay with socket base
40*160 0.5mm Blue Aluminum Alloy Water Cooling Block Radiator Liquid Cooler Heat Sink Equipment
$24.29Other Module BoardAdd to cartFeatures1. New high quality, Connector outer diameter 9.5mm, connector inner diameter 6-8mm.2. Inner flow channel extrusion.3. Welding from components to a whole one.4. Suitable for computer CPU water, industrial inverter drive, cooling, industrial switchboard cooling.5. Rate of less than 5X10-6 mbar.l/s parts.6. Internal fin thickness 0.5MM.SpecificationMaterial:luminum alloyColor:blueSize:pprox. 40x160x12mmProcessing:Vacuum auminum BrazingPackage includes1 x Water Cooling
20Pcs DS18B20 Temperature Sensor 18B20 TO-92 Encapsulation
$44.75Electronic Accessories & SuppliesAdd to cart20Pcs DS18B20 Temperature Sensor 18B20 TO-92 EncapsulationSpecificationTemperature measurement range:-55°C ~ +125°CAccuracy:± 0.5°CEncapsulation:TO-92Quantity:20pcsPackage included20 x DS18B20
20pcs WXD3-13-2W Precision Potentiometer 22K 22K Ohm Wirewound Multi-Turn Potentiometer
$49.11Module ComponentsAdd to cartSpecificationsResistance range:22K┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included20 x Potentiometer
Reviews
There are no reviews yet.