RIDEN LD25 Electronic Load Resistor USB interface Discharge Battery Test LED Display Fan
$24.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Rated operational voltage:DC4-25.0V:Max discharging power:25W
Rated operational current:0.25-4.00A (when fan don’t work, the min. constant current is 0.05A ):Fan Speed:Large size intelligent temperature control fan, speed 5800±10%RPM
Constant current resolution:±(1%+3 digits):Heat dispatch method:intelligent temperature
control fan + All aluminum fan
Working temperature:-10→-40→:Adjustable potentiometer:Preci sion multiloop adjustable potentiometer
Display mode:4 bit LED tube:Expansion port:Micro USB port, Type-C port
Product weight:56.51g:Product size:83.8×41.1×27.9mm
Product Structure
A. Micro USB port:MAX current 2A
B.USB male port (widened power wire, MAX current 4A)
C. Type-C port:MAX current 4A
D. All aluminum fan
E. Intelligent temperature control fan
F. 4 Bit LED tube
G. Preci sion multiloop adjustable potentiometer
H. “SET Inch button:press “SET Inch to switch display status, Press and hold the button to set the load output recovery mode after protection removed.
I. “ON/OFF Inch button:press the button to open or close output. Press and hold the button to set the boot default status of open or close
Function Introduction
a. Protection function
OVP (over-voltage protection):there is OVP at 25-30V; it will be damaged permanently over 30V.at OVP, LED show OVP, as picture 1 show)
OTP(over-temperature protection):load temperature is over 80→, the LED show OTP, as picture 2 show.
OPP(over-power protection):the power is over 80→, the LED show OPP, as picture 3 show.
b. Set output recovery mode after load entering protection status, manual or automatic
c. View the voltage value, current value and power value of the load.
d. Intelligent temperature control fan. When the current is over 2A or the temperature is over 40→, the fan will start.
e. Preci sion multiloop adjustable potentiometer:you can adjust the current precisely, upto 0.01A. so you don’t need to adjust a big current mistakenly to damage the power supply. So the power supply will not be damaged due to mistakenly adjustment
f. you can set default boot status freely, open or close.
Operation Instruction
The load is powered at the range of 4-25.0V (the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired), the LED will be flashing to remind current setting value, waiting for output. Press ON/OFF button, open output to start work.
1. Adjust output current value.
Turning the rotary control clockwise increases the value and anticlockwise decreases the value. According to the needs of the situation, the potentiometer can realize coarse adjustment or fine adjustment. The fine adjustment can be accurate to 0.01A.
2, Adjust LED display status
Press “SET Inch to adjust the LED display status, default display output current value. Press “SET Inch button to display *.**A, **.*P, **.*V followed by recycling.
3. Open or close load output
Press “ON/OFF Inch button, you can open or close load output
4, Set load default boot status (open or close status, Factory default close status)
Press and hold “ON/OFF Inch button to set load default boot status freely. Press and hold “ON/OFF Inch button, if the LED will display “–ON Inch, as picture 4, the load will open output when power on next time; If the LED display Inch-OFF Inch, as picture 5 show, the LED will display current value flashing at last shutdown when power on next time, then press “ON/OFF Inch button to open output.
5, Set the load output recovery mode after protection removed.
Press and hold “SET Inch button, to set output recovery mode after protection removed. Press and hold “SET Inch button, if the LED will display “–ON Inch, as picture 4, and the protection was removed, the load will recover to work; If the LED display Inch-OFF Inch, as picture 5 show, and the protection was removed, the LED still show protection status, then press “ON/OFF ‘button, the display will display present setting current flashing, then press “ON/OFF‘ button again, the load recover to work.
NOTE:Please check the output current of power bank carefully. The current of the power bank is small, so adjust smaller current when the load was used.
Application
Assist to measure Micro USB cable good or not
Assist to measure Type-C cable good or not
Assist to measure output current capacity of charger good or not
The usage of large batch ageing test at the charger factory
Information
LD25 user manual download page:http://www.mediafire.com/folder/q2o63jc8df6qc/LD25
NOTE
This product has no reverse connection protection, the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired.
Package included
1 x LD25 Electronic Load
Weight | 0.056 kg |
---|
Customers Also Viewed
24S 72V Lithium Battery 3.2V Power Protection Board 30A-180A with Temperature Protection Equalization Function Overcurrent Protection BMS PCB
$60.74Battery Protection ModuleAdd to cartCurrent 30A / Current 40A / Current 50A / Current 60A / Current 70A / Current 100A / Current 130A / Current 150A / Current 180A /
ONLY LED Light Lighting Kit for Lego 42096 Technic Porsche 911 RSR Bricks Toys
$18.50DIY Electronic KitsAdd to cartDescriptionInterface:USBColor:As the picture shownFitmentONLY For Lego Technic Porsche 911 RSR (42096) Bricks ToysFeaturesEasy to install.LED powered by USB.Make your model more cool.ONLY For Lego 42096 Technic Porsche 911 RSR Bricks.Package Included1 x LED Light Kit(Model Not Included)1 x Battery Case
500mL Clear Borosilicate Glass Filtering Flask Vacuum Filtration Flask Bottle Lab Glassware
$40.49Glassware KitAdd to cartDescription– Flasks are glass or plastic containers for storing or collecting chemical samples or solutions in scientific laboratories.– It shaped like a cone with a wide, flat base that narrows to a neck opening, which can be closed with a stopper or cap.SpecificationMaterial:Borosilicate GlassCapacity:500mLFlask Style:Filtering (vacuum)Package Included1 x Glass Filtering Flask
2400mAh Portable Solar Panel Charger Reusable Solar Generator System USB Port with Lamp Lighting
$64.79Solar GeneratorAdd to cartFeature1.Reusable solar generator, solar charging, environmental protection and energy saving, you can use it in anywhere when there is adequate sunshine.2.Equipped with USB charging cable, you can charge your electronic products easily with the built-in large capacity battery, you can charge for mobile phones, MP3, MP4, digital cameras and other electronic products.3.White LED light and …
20pcs Sensor Shield V5.0 Sensor Expansion Board for DIY Electronic Building Blocks of Robot Parts
$62.36Sensor & Detector ModuleAdd to cartFeaturesLatest Sensor Shield V5.0 sensor expansion board is still before laminated design PCB Immersion Gold processing technology, the motherboard is not only Duemilanove 2009 controller of digital and analog interface extended to the steering gear line order form, also ad hoc IIC interface, 32 Servo controller interface , bluetooth module communication interface, SD card module …
Reviews
There are no reviews yet.