RIDEN LD25 Electronic Load Resistor USB interface Discharge Battery Test LED Display Fan
$24.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Rated operational voltage:DC4-25.0V:Max discharging power:25W
Rated operational current:0.25-4.00A (when fan don’t work, the min. constant current is 0.05A ):Fan Speed:Large size intelligent temperature control fan, speed 5800±10%RPM
Constant current resolution:±(1%+3 digits):Heat dispatch method:intelligent temperature
control fan + All aluminum fan
Working temperature:-10→-40→:Adjustable potentiometer:Preci sion multiloop adjustable potentiometer
Display mode:4 bit LED tube:Expansion port:Micro USB port, Type-C port
Product weight:56.51g:Product size:83.8×41.1×27.9mm
Product Structure
A. Micro USB port:MAX current 2A
B.USB male port (widened power wire, MAX current 4A)
C. Type-C port:MAX current 4A
D. All aluminum fan
E. Intelligent temperature control fan
F. 4 Bit LED tube
G. Preci sion multiloop adjustable potentiometer
H. “SET Inch button:press “SET Inch to switch display status, Press and hold the button to set the load output recovery mode after protection removed.
I. “ON/OFF Inch button:press the button to open or close output. Press and hold the button to set the boot default status of open or close
Function Introduction
a. Protection function
OVP (over-voltage protection):there is OVP at 25-30V; it will be damaged permanently over 30V.at OVP, LED show OVP, as picture 1 show)
OTP(over-temperature protection):load temperature is over 80→, the LED show OTP, as picture 2 show.
OPP(over-power protection):the power is over 80→, the LED show OPP, as picture 3 show.
b. Set output recovery mode after load entering protection status, manual or automatic
c. View the voltage value, current value and power value of the load.
d. Intelligent temperature control fan. When the current is over 2A or the temperature is over 40→, the fan will start.
e. Preci sion multiloop adjustable potentiometer:you can adjust the current precisely, upto 0.01A. so you don’t need to adjust a big current mistakenly to damage the power supply. So the power supply will not be damaged due to mistakenly adjustment
f. you can set default boot status freely, open or close.
Operation Instruction
The load is powered at the range of 4-25.0V (the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired), the LED will be flashing to remind current setting value, waiting for output. Press ON/OFF button, open output to start work.
1. Adjust output current value.
Turning the rotary control clockwise increases the value and anticlockwise decreases the value. According to the needs of the situation, the potentiometer can realize coarse adjustment or fine adjustment. The fine adjustment can be accurate to 0.01A.
2, Adjust LED display status
Press “SET Inch to adjust the LED display status, default display output current value. Press “SET Inch button to display *.**A, **.*P, **.*V followed by recycling.
3. Open or close load output
Press “ON/OFF Inch button, you can open or close load output
4, Set load default boot status (open or close status, Factory default close status)
Press and hold “ON/OFF Inch button to set load default boot status freely. Press and hold “ON/OFF Inch button, if the LED will display “–ON Inch, as picture 4, the load will open output when power on next time; If the LED display Inch-OFF Inch, as picture 5 show, the LED will display current value flashing at last shutdown when power on next time, then press “ON/OFF Inch button to open output.
5, Set the load output recovery mode after protection removed.
Press and hold “SET Inch button, to set output recovery mode after protection removed. Press and hold “SET Inch button, if the LED will display “–ON Inch, as picture 4, and the protection was removed, the load will recover to work; If the LED display Inch-OFF Inch, as picture 5 show, and the protection was removed, the LED still show protection status, then press “ON/OFF ‘button, the display will display present setting current flashing, then press “ON/OFF‘ button again, the load recover to work.
NOTE:Please check the output current of power bank carefully. The current of the power bank is small, so adjust smaller current when the load was used.
Application
Assist to measure Micro USB cable good or not
Assist to measure Type-C cable good or not
Assist to measure output current capacity of charger good or not
The usage of large batch ageing test at the charger factory
Information
LD25 user manual download page:http://www.mediafire.com/folder/q2o63jc8df6qc/LD25
NOTE
This product has no reverse connection protection, the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired.
Package included
1 x LD25 Electronic Load
Weight | 0.056 kg |
---|
Customers Also Viewed
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck Module
$16.24Power Supply ModuleAdd to cart20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step-Down Power Supply Buck ModuleFeaturesSize:8.6 x 12.33 mmInput voltage:DC 4.2 V – 10 VOutput:3.3 V, 800 mANote1.Boost modules or buck module indicate the operating voltage, Please do not exceed operating voltage, or it will be damaged easily!2.Boost module output voltage can only be greater than or equal to …
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck ModuleRead More
XD-37 12V 72W Electronic Semiconductor Refrigeration DIY Air Cooling System Small Air Conditioning
$35.52Electronic Accessories & SuppliesAdd to cartFeatures1. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.2. Application:Fish tank cooling, computer water cooling, circulating water cooling, cooling equipment, etc.3. Use to Connect the pump and the power supply.4. Diy kits Thermoelectric Peltier refrigeration cooling system.Fast cooling, outstanding effect.5. Simple operation, strong practicability.DescriptionsNo noise, …
5pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$11.42Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
10pcs Mini 2A DC DC Buck Converter 3.3-5.5V to 3.3V Module Step Down Voltage Regulator Module
$30.16Boost & Buck ModuleAdd to cartDescriptionINPUT 3.5V/1.4A; OUTPUT 3.3V/1.5AINPUT 3.7V/1.89A; OUTPUT 3.3V/2AINPUT 4.2V/1.67A; OUTPUT 3.3V/2AINPUT 4.5V/1.46A; OUTPUT 3.3V/2AINPUT 5V/1.4A; OUTPUT 3.3V/2A Input voltage 3.3-5.5V, output 3.3V (deviation ±2.0%)Long time maximum output current 1.8AShort time maximum output current 2.2AUp to 97% efficiency(@4.2V to 3.3V/500MA)Low Quiescent Current:20uAOvertemperature shutdown, input under-voltage protection, External Soft start, and short circuit protection. DC-DC Buck Step-down module …
10Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid Dropper
$10.80Lab ChemicalsAdd to cartSpecificationsMaterial:PECapacity:10mlSize:20X77mm / 0.79X3.0 inchNeedle Size:Inner Diameter =0.8mm, Outer Diameter =1.2mm, Length=12mmQuantity:10 pcsFeatures1. 10ml empty plastic bottle with metal needle2. Metal needle design,durable and easy to use3. Ideal for storing E cig liquid,solvents, light oils , eye drops, saline, etc.Package included10 X 10ml Empty Plastic Bottle With Metal Needle
Reviews
There are no reviews yet.