RIDEN HD25/HD35 USB Electronic Load Digital Display Voltage Current Meter Battery Aging Detector
$37.17
Type2 HD35 / Type2 HD25 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Optional type:HD25:HD35
Rated operating voltage:DC4-25.0V
Maximum discharge power:25W:35W
Rated operating current:0.25-4.00A (0.05A starts when the fan is not started):0.25-5.00A (0.05A starts when the fan is not started)
Maximum fan speed:Oil bearing fan 5800±10%RPM:Hydraulic bearing fan 8000±10%RPM
Fast charge trigger mode:QC2.0 5V, 9V, 12V, 20V, QC3.0, FCP, AFC9V
Constant current accuracy:±(1%+3 words)
Heat dissipation method:Intelligent temperature control fan + all aluminum heat sink
Working temperature-10→-40→
Adjustment potentiometer:Precision multi-turn adjustable potentiometer
Display type:4-digit LED digital tube
Extension portsMicro USB interface, Type-C interface
Product weightabout 52g
Product size84 x 41 x 28mm
Application advice:Factory batch aging must use HD35
Load function
A. Protection function
OVP overvoltage protection (25V-30V overvoltage protection, permanent damage after 30V; after overvoltage protection, digital tube displays OVP)
OTP over temperature protection (If load temperature is greater than 80 °C, the output will automatically cut off, and the digital tube displays OTP)
OPP over power protection (If power is greater than 35W, the output is automatically cut off, and the digital tube displays OPP)
B. Set the load to resume normal operation manually or automatically after the protection condition is released.
C. View load voltage value, current value, power value
D. Intelligent temperature control fan, when the power is greater than 10W or the load temperature is greater than 40 °C, the fan starts automatically.
E. Precision adjustable potentiometer, which can accurately adjust the current to 0.01A, and will not damage the power supply due to excessive current error caused by hand error.
F. Freely set the load on state, the default is on or off.
Trigger/cheat function
1. Trigger function
The charger can be used for QC2.0, QC3.0, Huawei FCP, Samsung AFC 9V, and multiple fast charging modes for deception triggering.
2. Fast charge support detection function
Use the AUTO mode to detect the charger’s support for fast charge mode.
3. Power-on automatic trigger function
Power-on automatically triggers fast charging and automatically turns on the load, which is suitable for batch testing of aging chargers.
Q&A
Q:My charger has the largest nominal support QC2.0 12V2A How do I test if the charger supports it
A:Insert the load, long press the trigger button, after the red light of QC2.0 is on, short press “OK Inch button, the red light flashes, then press twice again to change to QC2.0 12V mode. Press and hold the trigger button to enter the load mode, press SET to check if the current voltage is around 12V. Turn on the load and slowly adjust the current to 2A. Check if the voltage drops significantly (>0.5V), then let the load work for a while and measure the heating of the charging head. If the load is restarted or the voltage drops and the charging head is heated rapidly, it means that the charging head cannot be loaded enough and must be derated.
Q:Is my PD2.0 supported
A:The load can age the PD charger, but it cannot be PD spoofed. The dual-head Type-C line connects the PD charger to the load, and the PD charger defaults to 5V. If the PD charger supports QC2.0 at the same time, high voltage aging can be achieved by tricking QC2.0.
Q:How do I want to release the fast charge fast charge
A:In the trigger mode, short press the trigger button to switch the mode to release; in the load mode, long press the trigger button to enter the trigger mode will be automatically released.
Application scenario
Auxiliary measurement Micro USB charging cable good or bad test auxiliary measurement Type-C
The test of the charging line is good or bad.
Charger factory batch aging test use
Package includes
1 x Battery Aging Detector
Weight | 0.052 kg |
---|
Customers Also Viewed
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial Port
$15.30Display ScreenAdd to cartFeatureResolution:128X160Driver IC:ILI9163/ST7735Module with regulator IC supports 3.2V/5V power supplyWith SD card holder, you can do experiments like digital photo frameThe module reserves the Nokia3310/5110 interface, supports the 1602 interface, and directly plugs in and out.IO for streamlined wiring:(only 3 IOs after optimization)1. RST– directly connected to the microcontroller reset signal terminal, this IO can save2. …
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial PortRead More
USB Boost 5V to 1.2V 3.3V 6V 9V 12V 24V Power Supply Module Adjustable Voltage
$10.92Test & Measuring ModuleAdd to cartFeatureInput voltage:3.5V-12VOutput voltage:1.2-24VOutput PowerOutput voltage 1.2V-2V, used within 2WOutput voltage 2V-20V, used within 3WOutput voltage 20V-24V, used within 2.5WOutput power = output voltage x output currentNote:This product is not a high power supply, please use it within the power range.Package includes1 x Power Module
10pcs IR LED infrared Light Board for CCTV Camera Night Vision 30-40M 6*Array LED White 2.5W DC12V
$26.76LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features– High power / Spot Light / Infrared IR LED boards for CCTV cameras night vision.– Driven board & CDS sensor included.– Power supply exceeds DC13V may greatly reduce the LEDs operating …
2500Pcs 2.54mm XH2.54 2p 3p 4 Pin Connector Plug+Straight Needle+Terminal Socket Header Wire Adaptor
$56.09Electronic Accessories & SuppliesAdd to cartDescription2pin = 200 sets3pin = 200 sets4pin = 100 setsPin Connector Terminal:1500 pcs (Please allow 5% deviation)Package included10 x Connector plug kit with box
19PCS DIY Resin Casting Molds Silicone Jewelry Pendant Craft Making Mould Tool
$58.71ConnectorsAdd to cartSpecificationName:Resin Casting MoldsMaterial:SiliconeColor:TransparentFeature-Flexible, resistant to tearing.-Easy to use and clean.-Easy to release.-Durable in use.-Great for jewelry pendant making, earrings, soap making, chocolate making, sugarpaste making.-You can also add some flowers, glitter, colors to make your own art craft gift.Package Included9x Resin Casting Molds (Mold only, NO accessories)10x Wood Sticks
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development Board
$98.40Motherboard & Development BoardAdd to cartDocumentsProduct specification:Click here to openSchematic diagram:Click here to openat_instruction_set_CN_ONLY:Click here to open (If you mind about this, please don’t buy)hardware_info:Click here to openserial_tool:Click here to openFeature:Ca-01 development board characteristics and detailed parametersCommunication system:4GApplicable frequency band:LTE-FDD:B1/B3/B5/B8LTE-TDD:B34/B38/B39/B40/B41General characteristics:3GPP E-UTRA Release 13Band width:1.4/3/5/10/15/20MHZModule size:24.0mm x 24.0mm x 2.3mmPackage method:stamp hole + LGAModule weight:about 2.6gPower supply voltage:3.3V~4.3V, typical value …
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development BoardRead More
Reviews
There are no reviews yet.