3Set 433MHz DC 12V24V 2-Way Remote Control Switch 2 Channel Relay Module Motor forward and Reverse Controller
$76.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameter
1. Working voltage:DC12-24V
2. Working frequency:433.92MHZ
3. Quiescent current:8.5mA
4. Load power:500W
5. Receiving sensitivity:-105dBM
6. Working mode:Jog, self-locking, interlocking, delay, independent, 1 way, 1 way, self-locking
7. Output signal:can output 2 switching signals or 2 AC220V voltage signals
8. Coding method:learning code
9. Modulation method:ASK
10. Working temperature:-10C~+70C
Instructions
Jog mode:Press the remote control relay to pull in, release the remote control relay to disconnect.
Jog learning method:press the learning button once, the LED indicator flashes quickly 3 times and then goes out, enter the learning state, press any button on the remote control, the LED indicator flashes quickly 3 times and then goes out, then press the remote control button 2. The LED indicator flashes 3 times quickly and then stays on, indicating that the code is successfully matched. (PS. Because it is 2 channels, you need to learn 2 buttons)
Self-locking mode:Press the remote control relay to close, and press the remote control again to disconnect the relay.
Self-locking learning method:Press the pairing button twice in a row, the LED indicator flashes quickly 3 times and then goes out, enter the learning state, press any button on the remote control, the LED indicator flashes quickly 3 times and then goes out, then press the remote control Button 2, the LED indicator flashes quickly 3 times and then stays on, indicating successful code matching
Interlock mode:Press the remote control A button, the relay is closed, and press the remote control B button to disconnect.
Interlock learning method:Press the pairing button 3 times in a row, the LED indicator flashes quickly 3 times and then goes out, enter the learning state, press any button on the remote control, the LED indicator flashes quickly 3 times and then goes out, then press the remote control Button 2, the LED indicator flashes quickly 3 times and then stays on, indicating successful code matching
1-way jog, 1-way self-locking:Press the pairing button 4 times in a row, the LED indicator flashes 3 times and then goes out, enter the learning state, press any button on the remote control, the LED indicator flashes 3 times and then goes out. Then press the remote control button 2, the LED indicator flashes quickly 3 times and then stays on, indicating that the code is successfully matched
Code clearing function:Press the code button 8 times in a row, the LED indicator flashes quickly 4 times and then stays on, the code clearing is completed, and all the remote control key codes learned before are cleared.
Precautions
1. Do not operate with power, turn off the power to operate, and power on after the test is confirmed to be correct.
2. When the remote control voltage is low, please replace the battery in time (when the remote control battery voltage is low, the remote control distance will generally become shorter).
3. When using wireless electronic products, pay attention to avoiding metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, and avoid the short distance between the remote control and the reception or the failure of normal operation.
4. Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product. In severe cases, it will damage the product and bring hidden dangers to your safety.
Package includes
3 x Receiver
6 x transmitter
Weight | 0.36 kg |
---|
Customers Also Viewed
5pcs RS232 to TTL Serial Converter Module DB9 Connector MAX3232 Serial Module with Cable
$21.38Converter BoardAdd to cartFeatureIt is widely used in radio modification, phone flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgradeIt can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU CommunicationPort:TX RX VCC GNDChip:domestic MAX3232Package includes5 x Serial Module5 x Cable
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with Case
$37.91DIY Electronic KitsAdd to cartDSO138mini brings in the following improvementsBetter structure and smaller size. The bulky pin-headers connecting the LCD and main board in old DSO138 has been eliminated. The soldering of these pin-headers has being found problematic for beginners.USB or battery powered. This makes the scope much more convenient to be used as a portable device. New version …
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with CaseRead More
CJMCU-2112 CP2112 Evaluation Sensor for CCS811 Debugging Board USB to I2C Communication Converter Module
$16.67Sensor & Detector ModuleAdd to cartFeatureDirect connection to PC via USBDirect connection to host system via I2CSimple software GUI for easy setup and data loggingDetermine the effects of Temperature & HumidityIntelligent algorithms to output TVOC / eCO2 levelsPackage includes1 x Sensor Module
3 Pcs Red Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$35.10Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included3* RED Acrylic Case Kit
5pcs CTS DTR USB Adapter Pro Mini Download cable USB to RS232 TTL Serial Ports CH340 Replace FT232 CP2102 PL2303 UART TB196
$23.80Converter BoardAdd to cartFeatures– This product use CH340 chips, stable performance, fully compatible with USB1.1,USB2.0,USB3.0 , baud rate up to 256 kbps; – Uses:Replace FT232 for Arduiuo Pro Mini Download – With receiver indicator,transmitter indicator, and power indicator.– Chip:CH340C– Compatible with PRO MINI download port– Board size:18mm x 30mm(Does not include USB ports and pins)– Supports the following …
10Pcs XH Pitch 2.54mm Single Head 4Pin 4Way Wire To Board Connector 15cm 24AWG with Socket
$6.55Electronic Accessories & SuppliesAdd to cartFeatureType:XH2.54 Single Head WirePin Number:4 PinWire Gauge:24AWG Pitch:2.54mmLength:15cmQuantity:10 Sets(10Pcs Single Head Wire + 10Pcs Socket )Note:the cable color may have different.Package included10 x XH2.54 Single-Head 4Pin 4Way Wire To Board Connector10 x Socket
2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$8.26Smart ModuleAdd to cartTY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office Decor
$30.50PlasticsAdd to cartSpecificationsMaterial:PVCSize:45cm X 200cmFeatures– Energy-saving and environmental protection. No gum paste, paste can be repeated.– Deadening UV intrusion, protecting indoor objects fading and aging.– Filter light and reduce glare, protect the skin and vision.– Easy to mount and clean.How to use1. First clean the surface of the pasting position, pasting surfaces should be smooth, not be …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office DecorRead More
Reviews
There are no reviews yet.