12V/24V/36V LCD Display Lead Acid Battery Capacity Meter Voltmeter Power Monitor
$38.46
Voltage 36V / Voltage 24V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Material:Plastic Shell
Color:Grey+Blue
Size:As picture shown
Features
The open programming mode
The buzzer alarm(Selective assembly).
The low power red mark flashes to remind.
The product can go to sleep after 10 seconds.
The 10~100V wide input voltage,reverse protection.
The installation is simple, with a buckle, without screws.
Detection of the battery temperature (Selective assembly).
The color liquid crystal material, light clear display, display the soft night.
To display the percentage of remaining battery power,voltage, temperature value.
Suitable for lead-acid, lithium-ion batteries, lithium iron phosphate, metal hydride battery.
INSTRUCTIONS
1. PH2.0 terminal products supporting the use of wire, connected to the circuit board face should plug back.
2. External NTC temperature sensor, please put the sensor to measure the temperature of the parts, do not
squeeze the sensor( selective assembly).
3. Red line to the positive terminal, black line to the negative terminal.
4. After the instrument is powered on , which shows the percentage of the battery power, the voltage value,
and the symbols of the analog battery.
5. Press the button to turn off the instrument. In close mode, you can wake up the instrument by pressing
any button.
6. Click the button , you can switch the voltage value and temperature value display.
7. The battery symbols on the display interface, from the right to the left, are 7 display boxes representing the
pool power from low to high.
8. The voltage on the display interface is measured in real time, and the voltage value is displayed on
10-100V.
9. The percentage on the display interface is the percentage of the remaining battery power
10. When the battery is connected to the charger or the discharge of the high current load, the display
parameters will fluctuate
11. The red lightning flashes the alarm when the battery is low
12. Low voltage buzzer alarm(Selective assembly)
13. If the battery specification is special, you can enter the set mode 3– and reset the upper and lower limits of
the measured battery voltage.
Package included
1x Battery Monitor
1x Cable
Notice
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.
Weight | 0.027 kg |
---|
Customers Also Viewed
JT-180 1.4W 7V Solar Panel Power Fountain Pump Outdoor Garden Pond Pool Submersible Water Pump Kit
$64.79Electrical Pump & ValveAdd to cartSpecificationsModel:JT-180Materail:Monocrystalline silicon+ABSSolar battery:7V,1.4WSolar battery:110mm*110mm/4.3inch*4.3inchThe power of pump:DC7V 1.4WMax flow pump:200L/hMax.water height of pump:75cm(Max,water-jet height:50cm)Life time:≥15000HoursFeatureThis product has the lowest rate of the power of solar battery to pump power,and it is not only very easy to operate the brushless motor under little sunshinelike the brush motor,but also, it has the much long life time than …
5pcs 220V XH-W3003 Micro Digital thermostat High Precision Temperature Control Switch Temperature Alarm
$68.61Sensor & Detector ModuleAdd to cartFeatureProduct Name:Microcomputer Temperature ControllerProduct model:XH-W3003Temperature range:-50~110°CTemperature control range:-50~110°CTemperature measurement accuracy:+-0.1 °CTemperature control accuracy:+-0.1 °CTemperature probe:1 meter waterproof probeSupply voltage:AC110-220VOutput power:AC220V:1000WOutput type:Direct outputOutput currentAppearance size:60 x 45 x 31mmOpening size:73mm (aperture 4mm)Features:Setting methodHigh temperature alarm (range:-50~110°C):For example, if you want to alarm when the temperature exceeds 20 °C, set the upper limit temperature to 20 °C …
30pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$178.88Smart ModuleAdd to cartTY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the …
2Pcs DC-DC Boost Buck Adjustable Step Up Step Down Automatic Converter XL6009 Module Suitable for Solar Panel
$8.87Boost & Buck ModuleAdd to cartDescriptionsAuto start voltage will be pulled down to 7V or less, and engine will at high speed when the voltage up to 15V or higher. It is hard to work for 12V electrical equipment, this automatic buck boost module can solve this problem, regardless of the input voltage is 5V or 12V or 32V, the …
5 Pcs Blue Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$56.17Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included5* Blue Acrylic Case Kit
5pcs 0.5A 3S Synchronous Buck Li-Ion Charger DC 5-23V to 4.2V 8.4V 12.6V Power Supply Module for 3.7V 7.4V 11.1V 18650 Lithium Battery
$32.85Power Supply ModuleAdd to cartDescription3-Cell(3S) 12.6V VersionInput voltage:DC 14.8-23V(Recommend DC 14.8V/15V/18V)Charging voltage:12.6VCharging current:0.5ALed indicatorBright:Charging Off:full blinking:almost full; If the charging current is too large (or the battery capacity is small), it will quickly enter the flashing state, and the charging current should be reduced.Operating ambient temperature:-40° to +85°Storage temperature:-65° to +125°Size:30*15*5.5mmWeight:2gApplicationsCellular TelephonesPDA, MP3 Players, MP4 PlayersDigital CamerasBluetooth ApplicationsGame PlayersNotebookli-on …
15W 18V Semi Flexible Solar Panel with 5V USB Port & Cables
$58.36Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power (Pmax):15wMaximum Power Voltage (Vmp):18VMaximum Power Current (Imp):1.2aThe Number of Cells:36 PCSOutput:USB 5V & DC 18VSize:435 * 200 * 2.5 mmFeaturesLightweight and easy to carry.The charging temperature is -20-70 degrees Celsius.Flexible solar panel, maximum bending 30 degrees arc.Short circuit and surge technology keeps you and your equipment safe.Durable, waterproof.Packing Included1 x solar panels1 x …
15W 18V Semi Flexible Solar Panel with 5V USB Port & CablesRead More
DPX6005S Digital CNC Adjustable DC Power Supply 0-60V/32V 5A/3A 48V24V12V Step-down Board with LCD Display
$82.94Power Supply ModuleAdd to cartFeaturesIt is a fully CNC programmable step-down power supply with small size, high power, high efficiency and stable operation. It adopts a 1.8-inch TFT color liquid crystal display to provide comprehensive and clear display data. The power supply is controlled by an advanced microprocessor and can be precisely adjusted. And display voltage and current; using …
Reviews
There are no reviews yet.