T.SK106A.03 T.SK105A.03 Universal LCD LED TV Controller Driver Board +7 Key button+1ch 6bit 40Pins LVDS Cable+Speaker+EU Power Adapter
$59.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
T.RD8503.03 Firmware:Click here to open
T.V53.03 Manual:Click here to open
T.V53.03 Firmware:Click here to open
T.SK106A.03 Manual:Click here to open
T.SK106A.03 Firmware:Click here to open
New Version T.SK105A.03 Manual:Click here to open
New Version T.SK105A.03 Firmware:Click here to open
Note:Since the driver board model is updated frequently, the appearance and chip will be different, please refer to the actual received. If you mind this, please buy carefully.
Description
Model:T.V53.03 (Update from December 25, 2019)
Model:T.SK106A.03 (Update from September 1, 2020) (CN warehouse)
Update Model:T.SK105A.03 (Update from November, 2020) (CN warehouse) The specific model is mainly based on the received model, pay attention to burning the corresponding model firmware.
TV Format:Analog Signal
Support Language:Russian, English, Hindi, Simplified Chinese, Khmer, Vietnamese, Myanmar, French, German, Italian, Spanish.
Input Interface:PC / HDMI / TV / AV / USB multimedia playing
Power Adapter:DC 12V 3-5A
Screen interface:LVDS Single 6
Screen voltage:3.3V / 5V / 12V (Jump cap)
Not only USB interface can be used to upgrade programs, but also can use to play video/music/photo, basically, formats are supported. You can also set a boot display pictures or LOGO and Mirror Enable.
Only supports the resolution of
1920×1200
1920×1080
1680×1050
1680×945
1600X1200
1600×900
1400X1050
1440×900
1366×768
1280×1024
1280×854
1280×800
1280×768
1280×720
1024×768
1024×600
800×600
How to know if your panel suitable for this board
Step 1:Find your LCD model’s resolution (you can check the resolution from this link:http://www.panelook.com/index.php)
Step 2:Find and write in the corresponding firmware.
Programming
1. Put the firmware of ‘SKR8503_100.bin’ in formatted USB flash disk(FAT32), then insert the USB disk and the 7KEY-Button to the board
2. After turn on the power, the light of the 7key button be Red then flash red faster.
IT KEEPS flashing and NEVER STOP. it’s normal, just wait about 1 minute, it means upgrade has finished. then power off and pull off the u-disk. (Note that write programs do not power outages, crashing won’t be able to use)
Package included
1 x Controller Board
1 x English Remote control
1 x IR
1 x 7key button
1 x 1ch 6bit 40Pins lvds cable 250mm length
2 x 4ohm 3W Speaker
1 x EU 12V 4A Power Adapter
Note
The IR & KEY definition is special and different between v29 v56 v59 and 3463A, pls notice and don’t mix up.
This kit is just for signal interface is 1ch 6bit 40Pins and without inverter
If you are not sure, pls provide your lcd panel model number, so we can help you, thanks
Weight | 0.564 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.