20 Egg Automatic Digital incubator Chicken Poultry Hatcher Temperature Control
$115.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Color:White
Material:Foam
Power:25W
Power cord Voltage:DC 12V
Adapter voltage:100-240V AC 50/60Hz
Egg capacity:20
Duck egg capacity:15-18
Goose egg capacity:10-12
Size:(L)X(W)X(H)33X20X19cm/12.99inchX7.87inchX7.49inch(appr.)
Adapter:US Standard adapter(We will be based on your country to send the corresponding adapter plug)
Features
※Made of high density foam material, good insulation performance and uniform temperature.
※Suitable for breeding eggs of various sizes, low noise, and easy to use.
※High precision temperature controller with small temperature difference and high hatching rate.
※This is a semi-automatic incubator, which requires manually turning the egg 2-3 times a day when in 3~19day.
※Imitation of hen hatching body temperature.
※With egg light
How To Use
STEP 1:Place the water bag into the Egg Incubator box
STEP 2:Pour warm water(≈30℃) into the water bag
STEP 3:Place the temperature sensor on the water bag and fix it with tape(Be sure to place on the surface of the water bag, contact with the water bag) Then cover the cotton mat on it
STEP 4:When temperature is to stabilize, put the egg in
STEP 5:Cover the cotton mat, starting Incubating
STEP 6:Requires manually turning the egg 2-3 times a day during 3rd -19th day.
Note
* Be sure to test whether the water bag leaks, otherwise it will lead to the risk of short circuit.
* Must ensure that the covered material is breathable and that there is enough oxygen in the incubator.
* Invert the eggs in the incubator every day (2-3 times/day). Do not take away the warmth when turning over the egg.
* The original packaging foam lid does not need to be used during the incubation process.
* You can use potassium permanganate to disinfect eggs according to your actual situation.
* Eggs can be taken by light on the 7th-9th day of hatching
Package included
1 X Egg Incubator
1 X Insulation cotton mat
1 X Water bag
1 X Clip
1 X Water spray bottle
1 X Power adapter
1 X 12V Power cord
1 X Thermometer(Does not contain decorations)
Notice
-Please allow slight deviation of measurement due to manual measurement.
-Due to difference of photographic light, product batches and monitor setting, colors of actual product you get may slightly has unavoidable difference from what you see on your computer monitor, please understand
-Instruction is not included
Weight | 0.723 kg |
---|
Customers Also Viewed
1:2 1-56MHz 200W Balun HAM Shortwave Antenna Balun 50 ohm to 100 ohm Unbalanced Balance
$56.85RF amplifierAdd to cartThe main parameters1. The transformation ratio is 1:22. Input impedance:50 ohms (unbalanced)3. Output impedance:100 ohms (balance) suitable for QUAD ANT antenna4. Frequency range:1-56MHz5. Standing wave:less than 1.56. Power resistance:500w7. Dimensions:outer diameter 50x130mm8. Weight:350 grams9. Comes with epoxy resin plate and 304 stainless steel lifting ring, with two copper noses for connecting the vibrator, convenient for …
1:2 1-56MHz 200W Balun HAM Shortwave Antenna Balun 50 ohm to 100 ohm Unbalanced BalanceRead More
5 Pcs 2.54mm 20 Pins IC Socket Wide DIP Sockets Adapter Solder Type
$3.55Module ComponentsAdd to cartSpecificationColor:blackQuantity:5 pcsNumber of pins:20 Pins (10pins / row x 2 rows)Pin length:2.9mmPitch:2.54mmRow to row distance:7.62mmDimension:25 x 10 x 8mm (L x W x H)Contact termination through holeContact type dual wipe contactPackage included5 x 20 Pins IC Sockets
1Hz-150Khz 3.3V-30V Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display
$22.06Other Module BoardAdd to cartParameter settingsThe module has four independent keys, used to set the frequency and duty cycle, support short press (increase or decrease a unit)and long press (fast increase or decrease), very simple, set the parameters automatically save, power failure Lost.Module parameters1. Working voltage:3.3 ~ 30V;2. Frequency range:1Hz ~ 150KHz;3. Frequency accuracy:the accuracy in each range is …
4 Slots 18650 Battery Holder Plastic Case Storage Box for 4*3.7V 18650 Lithium Battery with 8Pin
$6.55Module ComponentsAdd to cartSpecificationsSupport Model:18650 BatteryShell material:ABS fire, flame retardant, high temperature, color diversity and other materials for choice.Metal spring:carbon steel nickel plating by NCAA salt spray test, stainless steel spring.External:wire, welding pieces, pins, male and female buckle (3.7v button)Terminal:copper nickel platingCorn:nickel plated with coppervPackage Included1 x 4 Slots 18650 Battery Holder Plastic Case Storage Box
Reviews
There are no reviews yet.