4CH Channel Optocoupler Isolation Relay Module 5V/12V/24V SCM PLC Signal Amplifier Board
$24.04
Voltage 5V / Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Structural Features
1. Use Hongfa relay, stable and reliable performance;
2. Compatible with two input modes of positive control and negative control;
3. Each channel has an LED action indicator for a more intuitive understanding of product performance;
4. Each channel adopts optocoupler isolation to enhance anti-interference performance and isolation performance;
5. At the same time, the power supply and the inchINinch control terminal are independently controlled;
6. The module adopts the standard inchDINinch rail-type installation design, which is convenient and quick to install, firm and stable.
Technical Parameters
1. Trigger signal:DC5V / 12 / 24V (Optional)
2. Each trigger signal current:5mA
3. Power supply voltage:DC5V / 12 / 24V
4. Each coil current:18.8mA
5. Contact type:one normally open and one normally closed (single pole)
6. Maximum load current of each contact:10A
7. Action time:below 12ms
8. Reset time:less than 4ms
9. Maximum switching frequency:18000 times / hour
10. Mechanical life:more than 20 million times
11. Relay installation:plug-in type (No)
12:Module installation method:DIN standard rail installation
Positive control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the negative voltage
IN1, IN2 are connected to positive voltage control, IN1 controls KI terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. K1, K2 means two relays work.
Negative control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the positive voltage
IN1, IN2 are connected to negative voltage control, IN1 controls KI terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. KI, K2 means two relays work.
Package includes
1 x Relay board
Weight | 0.1 kg |
---|
Customers Also Viewed
5pcs Blue Light Mini 0.36 inch DC Current Meter DC0-999mA 4-30V Digital Display with Reverse Connection Protection Ammeter
$43.50Test & Measuring ModuleAdd to cartFeatureModule name:Current display module:Measurement accuracy:0.10%Refresh rate:About 200ms – times:Display method:Three digits 0. 36inch digital tubeMeasuring range:0A-999mA:Power supply range:4V-30VWorking current:Less than 8mA:Display color:BlueStorage temperature:-10°C to +65°C:Input resistance:50 milliohmsWeight:10g:Peripheral size:35*14*10mmWiring diagram– The ground wire of power supply end and measuring end of this ammeter adopts common ground design, that is, the ground wire of the power supply …
ISD1820 3-5V Recording Voice Module Recording And Playback Module Control Loop Play / Jog Play / Single Play
$8.73Sensor & Detector ModuleAdd to cartDescriptions Main chip:ISD1820 Size:38.5 x 42.8mm Operating voltage:DC 3~5V Features Easy to use 10 second voice recording and playback. High quality, natural voice restore. Can be used as a megaphone module. With loop play, jog play, single play function. control. This module can directly drive 8 ohm 0.5W small speakers. Power supply:3-5V, can be connected …
15pairs MC Connector Male Female 30A 1000V with 1pair MC Spanner Solar Panel Branch Series Connect Solar System
$42.07Electronic Accessories & SuppliesAdd to cartDescriptionRated voltage:1000 V Rated impulse voltage:1000 V Rated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉 Test voltage:6 kV (50 Hz) Protection grade:IP67 Insulation material:PC/PA Contact material:Copper, silver-plated Operating temperature:-40°C ~ +90°C Safety class:II Flame class:UL94-V0 Contact resistance:≤5mΩ Insertion / Withdrawal force:≤50N / ≥50N Suitable for cables:10, 12, 14 …
10Pcs TJA1050 CAN Controller interface Module BUS Driver interface Module
$22.99Driver ModuleAdd to cartDescription1. onboard TJA1050 CAN controller interface chip2. chip commonly used pin has led, convenient connection to use3. pin 5 v to power supply4. PCB board size:22 (mm) x11.5 (mm)Package included10 x TJA1050 CAN Controller Interface Module
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/s
$10.92Card ReaderAdd to cartDescriptionRC522 chipMF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the ‘table’ application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of …
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/sRead More
Reviews
There are no reviews yet.