4CH Channel Optocoupler Isolation Relay Module 5V/12V/24V SCM PLC Signal Amplifier Board
$24.04
Voltage 5V / Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Structural Features
1. Use Hongfa relay, stable and reliable performance;
2. Compatible with two input modes of positive control and negative control;
3. Each channel has an LED action indicator for a more intuitive understanding of product performance;
4. Each channel adopts optocoupler isolation to enhance anti-interference performance and isolation performance;
5. At the same time, the power supply and the inchINinch control terminal are independently controlled;
6. The module adopts the standard inchDINinch rail-type installation design, which is convenient and quick to install, firm and stable.
Technical Parameters
1. Trigger signal:DC5V / 12 / 24V (Optional)
2. Each trigger signal current:5mA
3. Power supply voltage:DC5V / 12 / 24V
4. Each coil current:18.8mA
5. Contact type:one normally open and one normally closed (single pole)
6. Maximum load current of each contact:10A
7. Action time:below 12ms
8. Reset time:less than 4ms
9. Maximum switching frequency:18000 times / hour
10. Mechanical life:more than 20 million times
11. Relay installation:plug-in type (No)
12:Module installation method:DIN standard rail installation
Positive control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the negative voltage
IN1, IN2 are connected to positive voltage control, IN1 controls KI terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. K1, K2 means two relays work.
Negative control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the positive voltage
IN1, IN2 are connected to negative voltage control, IN1 controls KI terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. KI, K2 means two relays work.
Package includes
1 x Relay board
Weight | 0.1 kg |
---|
Customers Also Viewed
MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module
$45.91Sensor & Detector ModuleAdd to cartDescriptionSize:32mm X22mm X30mm length * width * heightMain chip:LM393, NH3 gas sensing probeWorking voltage:DC 5VFeatures1. It has a signal output indicator indication;2, dual signal output (analog output and TTL level output);3. The TTL output valid signal is low level; (when the output low level, the signal light is on, it can be connected to the …
MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor ModuleRead More
Waveshare BME280 Environmental Sensor Expansion Board Module Temperature/Humidity/Air Pressure
$29.04Sensor & Detector ModuleAdd to cartDocumentsManual:Click here to openSchematic:Click here to openDatasheet:Click here to openCode:Click here to openOverviewA tiny sensor with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.Due to its ultra small form factor, low power consumption, high precision with stability, the BME280 Environmental …
10pcs Yellow 22MM AC 60-500V Voltmeter Square Panel LED Digital Voltage Meter indicator Light
$31.54Electronic Accessories & SuppliesAdd to cartSpecificationsProduct Name:Digital Panel Light VoltmeterModel Number:AD101-22VMSInput Voltage:AC 60 to 500 Voltage (AC only)Rated CurrentBrightness:◎60cd/Square MetersVibration AC Frequency:2-80Hz AccelerationElectrical durability:◎30,000HHole Cutting Size:22mm/ 0.87” DiameterMaterial:Plastic, Metal, Electric ComponentsColor:YellowPackage included10 x Voltmeter
3pcs DC 9V To 24V Touch Switch Capacitive Touch Sensor Module LED Dimming Control Module
$12.31Sensor & Detector ModuleAdd to cartParameterInput voltage:DC 9V-24VOutput voltage:DC 9V-24VLoad power:30WLoad current:3AStandby current:10mAStandby power consumption:0.1WWorking environment temperature:-20°C-65°CModel:Touch_S (L40W10)Size:40*10*1.2mm (length*width*height)(The test condition:Vin=12V)Mode descriptionTouch_Sensor_S00 (normal switch)S00 mode, quick touch to switch the lighting on / off status, without dimming function, the effect is gradual.Touch_Sensor_S01 (unidirectional dimming)In the S01 mode, the quick touch switches the on / off status of the light; in …
3pcs DC 9V To 24V Touch Switch Capacitive Touch Sensor Module LED Dimming Control ModuleRead More
Excellway 10 Sets Mini Micro JST XH2.54mm 7 Pin Connector Plug Socket Wire Cable 150mm
$20.24ConnectorsAdd to cart10 Sets Mini Micro JST XH2.54 7-Pin Connector Plug With Wires Cables 150mmSpecificationProduct Name:Connector Plug With WiresPart:Connectors/WiringModel:XH 2.54mmFuel Source:ElectricLength:150mmPitch:2.54mmWire Size:24AWG 1007Quantity:10Pairs(10Pcs Single Head Wire + 10Pcs Socket )Package Includes10 Sets XH2.54 7Pin Single End 15cm Wire To Board Connector
Reviews
There are no reviews yet.