4CH Channel Optocoupler Isolation Relay Module 5V/12V/24V SCM PLC Signal Amplifier Board
$24.04
Voltage 5V / Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Structural Features
1. Use Hongfa relay, stable and reliable performance;
2. Compatible with two input modes of positive control and negative control;
3. Each channel has an LED action indicator for a more intuitive understanding of product performance;
4. Each channel adopts optocoupler isolation to enhance anti-interference performance and isolation performance;
5. At the same time, the power supply and the inchINinch control terminal are independently controlled;
6. The module adopts the standard inchDINinch rail-type installation design, which is convenient and quick to install, firm and stable.
Technical Parameters
1. Trigger signal:DC5V / 12 / 24V (Optional)
2. Each trigger signal current:5mA
3. Power supply voltage:DC5V / 12 / 24V
4. Each coil current:18.8mA
5. Contact type:one normally open and one normally closed (single pole)
6. Maximum load current of each contact:10A
7. Action time:below 12ms
8. Reset time:less than 4ms
9. Maximum switching frequency:18000 times / hour
10. Mechanical life:more than 20 million times
11. Relay installation:plug-in type (No)
12:Module installation method:DIN standard rail installation
Positive control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the negative voltage
IN1, IN2 are connected to positive voltage control, IN1 controls KI terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. K1, K2 means two relays work.
Negative control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the positive voltage
IN1, IN2 are connected to negative voltage control, IN1 controls KI terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. KI, K2 means two relays work.
Package includes
1 x Relay board
Weight | 0.1 kg |
---|
Customers Also Viewed
700W 5 Nylon Fiber Blades Wind Turbine Power Generator DC 24V Safe Aerogenerator
$1,101.59Alternative Energy GeneratorsAdd to cartFeaturesStarting wind speed is low, high wind energy utilization, small size, good looks, low operating vibration.User-friendly design:convenient equipment installation, maintenance and repair.Using high-power tracking intelligent microprocessor control, effective regulation of current and voltage.The shell is made of aluminum alloy die-casting, with double bearing carrier, strong anti-typhoon capacity, safe and reliable operation.The wind wheel and blade …
700W 5 Nylon Fiber Blades Wind Turbine Power Generator DC 24V Safe AerogeneratorRead More
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar Panel
$39.69Smart Robot & Solar PanelAdd to cartOn the use and testing ofProducts can only be in the sun, the nominal peak power is the midday sun, the sun early in the morning one night and not the strong sun is not up to the nominal, buyers pay attention to this point and in the light! inside the room, the solar panels …
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar PanelRead More
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V DC-DC Boost Converter Module Board
$6.55Power Supply ModuleAdd to cartFeatureInput voltage 0.9-5V; output voltage 5VMaximum output current:480MaStarting voltage 0.8V, output current 7MAInput 1-1.5V, output 5V 40-100MAInput 1.5-2V, output 5V 100-150MAInput 2-3V, output 5V 150-380MAInput more than 3V, output 380-480MAOperating frequency:150KHZTypical conversion efficiency:85%Pin 2.54MM spacingSize:11mm x 10.5mm x 7.5mm (very small)Weight:about 1 gNote1. the input voltage is not greater than the nominal voltage, otherwise it …
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V DC-DC Boost Converter Module BoardRead More
AC 80-300V 3in1 LCD Time Voltage Frequency Combo Meter for Generator
$25.31Module ComponentsAdd to cartDescriptionAC 80-300V/30-70HZ 3in1 LCD Time Voltage Frequency Combo Meter For GeneratorVoltage and frequency can easily determine accurate display.Equipment long life, with power outage to save the cumulative time, can be stored for up to 20 years.SpecificationResolution:1VDisplay mode:LCDResolution:0.1hzWorking voltage:single phase:AC 80-300VFrequency measurement range:30-70HzWorking conditions temperature:-20 – 70→Working life:More than two yearsApplicationVoltage monitor, Generator Sets, industrial control …
AC 80-300V 3in1 LCD Time Voltage Frequency Combo Meter for GeneratorRead More
LCR-T4 Transparent Plastic Shell Clear Protective Case for Graphical Transistor LCR Tester Multifunctional Transistor Tester
$7.01Module ComponentsAdd to cartFeatureNet weight:93.6gSize:11.3*8.7*1.7cmNote:For LCR-T4 Graphical Transistor LCR Tester only (Product ID:1311439)The Tester is not includes.Package includes1 x LCR-T4 Transparent Plastic Shell kit
Reviews
There are no reviews yet.