2CH Channel Optocoupler Isolation Relay Module 5V/12V/24V SCM PLC Signal Amplifier Board
$15.30
Voltage 5V / Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Structural Features
1. Use Hongfa relay, stable and reliable performance;
2. Compatible with two input modes of positive control and negative control;
3. Each channel has an LED action indicator for a more intuitive understanding of product performance;
4. Each channel adopts optocoupler isolation to enhance anti-interference performance and isolation performance;
5. At the same time, the power supply and the inchINinch control terminal are independently controlled;
6. The module adopts the standard inchDINinch rail-type installation design, which is convenient and quick to install, firm and stable.
Technical Parameters
1. Trigger signal:DC5V / 12 / 24V (Optional)
2. Each trigger signal current:5mA
3. Power supply voltage:DC5V / 12 / 24V
4. Each coil current:18.8mA
5. Contact type:one normally open and one normally closed (single pole)
6. Maximum load current of each contact:10A
7. Action time:below 12ms
8. Reset time:less than 4ms
9. Maximum switching frequency:18000 times / hour
10. Mechanical life:more than 20 million times
11. Relay installation:plug-in type (No)
12:Module installation method:DIN standard rail installation
Positive control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the negative voltage
IN1, IN2 are connected to positive voltage control, IN1 controls KI terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. K1, K2 means two relays work.
Negative control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the positive voltage
IN1, IN2 are connected to negative voltage control, IN1 controls KI terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. KI, K2 means two relays work.
Package includes
1 x Relay board
Weight | 0.1 kg |
---|
Customers Also Viewed
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck Module
$16.24Power Supply ModuleAdd to cart20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step-Down Power Supply Buck ModuleFeaturesSize:8.6 x 12.33 mmInput voltage:DC 4.2 V – 10 VOutput:3.3 V, 800 mANote1.Boost modules or buck module indicate the operating voltage, Please do not exceed operating voltage, or it will be damaged easily!2.Boost module output voltage can only be greater than or equal to …
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck ModuleRead More
XD-37 12V 72W Electronic Semiconductor Refrigeration DIY Air Cooling System Small Air Conditioning
$35.52Electronic Accessories & SuppliesAdd to cartFeatures1. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.2. Application:Fish tank cooling, computer water cooling, circulating water cooling, cooling equipment, etc.3. Use to Connect the pump and the power supply.4. Diy kits Thermoelectric Peltier refrigeration cooling system.Fast cooling, outstanding effect.5. Simple operation, strong practicability.DescriptionsNo noise, …
5pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$11.42Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
10pcs Mini 2A DC DC Buck Converter 3.3-5.5V to 3.3V Module Step Down Voltage Regulator Module
$30.16Boost & Buck ModuleAdd to cartDescriptionINPUT 3.5V/1.4A; OUTPUT 3.3V/1.5AINPUT 3.7V/1.89A; OUTPUT 3.3V/2AINPUT 4.2V/1.67A; OUTPUT 3.3V/2AINPUT 4.5V/1.46A; OUTPUT 3.3V/2AINPUT 5V/1.4A; OUTPUT 3.3V/2A Input voltage 3.3-5.5V, output 3.3V (deviation ±2.0%)Long time maximum output current 1.8AShort time maximum output current 2.2AUp to 97% efficiency(@4.2V to 3.3V/500MA)Low Quiescent Current:20uAOvertemperature shutdown, input under-voltage protection, External Soft start, and short circuit protection. DC-DC Buck Step-down module …
10Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid Dropper
$10.80Lab ChemicalsAdd to cartSpecificationsMaterial:PECapacity:10mlSize:20X77mm / 0.79X3.0 inchNeedle Size:Inner Diameter =0.8mm, Outer Diameter =1.2mm, Length=12mmQuantity:10 pcsFeatures1. 10ml empty plastic bottle with metal needle2. Metal needle design,durable and easy to use3. Ideal for storing E cig liquid,solvents, light oils , eye drops, saline, etc.Package included10 X 10ml Empty Plastic Bottle With Metal Needle
Reviews
There are no reviews yet.